Narrow Dart-Mount Replacement Gaskets for Anthony Doors

Narrow Dart-Mount Gaskets for Anthony Door Repairs

This listing offers replacement door gaskets in the narrow dart-mount profile shown. Choose the size that matches the original sealing arrangement, then compare the mounting edge and profile before ordering. The Anthony name alone does not establish fit across different door designs.

Compare the Illustrated Profile

The profile images show a 7/16-inch-wide sealing face, a 7/16-inch profile height and a 5/16-inch mounting dart. These are cross-section dimensions, separate from the width and height of the complete gasket.

Compare the original dart shape, flexible sealing section and channel engagement. A similar perimeter size with a different mounting edge may not seat correctly. Use a clear end-on photo of the original profile when requesting identification help.

Select Your Gasket Size

Match the measurement method before choosing an option. Door dimensions, gasket outside dimensions and mounting-center measurements should not be used interchangeably.

Confirm the selected option above the add-to-cart button. For a manufacturer-number lookup, provide the chosen size and original door identification so the reference can be checked for that option.

Measurements to Collect

Anthony's gasket questionnaire asks for the door work-order identification and outside door dimensions measured to the nearest 1/16 inch. Record those separately from the gasket measurements.

• Photograph the door label and the complete original seal.
• Measure the gasket without stretching it and note where each measurement begins and ends.
• Photograph the mounting dart and sealing-face profile beside a ruler.
• Count the sides and identify where any open ends belong.
• Check whether the seal mounts on the door or on the frame.

Check the Door Before Replacing the Seal

A loose mounting channel, worn hinge or uneven door alignment can prevent a gasket from contacting the frame. Inspect the channel and sealing surface for damage or buildup. Check the corners and full perimeter after the replacement is seated, following the applicable door service instructions.

Frequently Asked Questions

Does the 7/16-inch measurement describe the complete gasket?

No. It describes the illustrated profile face and height. Select the complete gasket size separately.

Does one manufacturer number apply to every size?

The reference must match the chosen size and profile. Call with the original markings and door identification for a specific lookup.

Can I select a gasket using only the door width and height?

Also compare the mounting dart, cross-section, side count and measurement method. Similar dimensions do not establish profile compatibility.

Should I stretch the old gasket while measuring?

Keep it relaxed and record the measurement endpoints. Stretching or distortion can make the original size difficult to identify.

Will a new gasket correct a sagging door?

Have the hinges, mounting points and alignment checked. The sealing surface needs to meet the gasket evenly.

What if my original profile is wider?

Compare the 11/16-inch magnetic profile and 1-1/8-inch magnetic profile, then confirm the original mounting arrangement before choosing.

Ordering Help

Call 631-873-0509 for help matching a gasket, or use part-matching help. Browse Anthony refrigerator door gaskets and the Anthony parts identification guide.