Kason 10027C00034 OEM Deadbolt Walk-In Door Latch – 4" Flush Mount

Kason 10027C00034 SafeGuard Deadbolt Walk-In Door Latch – 4-Inch Flush Mount

The Kason 10027C00034 is a 0027C Series SafeGuard deadbolt locking handle and latch assembly for compatible commercial walk-in cooler and freezer doors. This polished-chrome configuration is designed for a flush-mounted, 4-inch-thick door and includes a quarter-turn, low-conductivity interior safety-release and matching strike arrangement as specified by Kason.

The Kason 0027C mechanism combines an exterior pull handle with deadbolt locking functionality. The associated interior release is designed to permit personnel to operate the release mechanism from inside the walk-in when installed and maintained according to the manufacturer's instructions.

Unlike an ordinary fixed pull handle, this assembly incorporates a mechanical deadbolt, locking mechanism, strike and interior-release system. Correct selection and installation are essential for safe walk-in door operation.

OEM Product Specifications

• Manufacturer: Kason Industries
• Manufacturer Part Number: 10027C00034
• Product Series: 0027C SafeGuard
• Product Type: Deadbolt Locking Handle / Door Latch
• Mounting: Surface-Mounted
• Door Configuration: Flush
• Designed Door Thickness: 4 inches (101.6 mm)
• Finish: Polished Chrome
• Inside Release: Quarter-Turn, Low-Conductivity
• Strike: Included in the manufacturer-listed configuration
• Locking: Cylinder Lock and/or Compatible Padlock
• Padlock Shank: Accepts up to 5/16 inch
• Latch Housing and Tongue: Die-Cast Zamak
• Mounting Specification: Designed for 1/4-inch fillister-head mounting screws
• Application: Compatible Commercial Walk-In Cooler and Freezer Doors

Ordering Note: Confirm the actual kit contents, locking cylinder/key arrangement, mounting hardware and inside-release components provided by the supplier. The manufacturer part number identifies the specified configuration, but the supplied package should be checked before fulfillment.

Kason 0027C SafeGuard Deadbolt Latch Features

• Deadbolt locking functionality for compatible walk-in doors.
• Polished-chrome exterior handle and latch assembly.
• Flush-mount arrangement for an appropriate 4-inch-thick door.
• Quarter-turn, low-conductivity inside release.
• Mechanical deadbolt engagement with the matching strike.
• External locking arrangement designed to reduce exposure to freezing conditions.
• Compatible locking mechanism designed to accept a cylinder lock or padlock.
• Surface-mounted construction for the manufacturer's intended applications.

Product Function and Operation

The Kason 0027C deadbolt locking latch secures the walk-in door through engagement between its locking mechanism and corresponding strike.

The exterior handle allows personnel to operate the door's designated locking arrangement, while the quarter-turn interior safety release provides the appropriate inside-release function.

The low-conductivity interior release is part of the manufacturer's door safety hardware design. Proper operation depends on correct installation, compatible door thickness, component alignment and the original door construction.

This assembly is not a replacement door hinge or automatic door closer. Hinges support the door, while this latch provides the designated mechanical locking and release functions.

Compatible Walk-In Cooler and Freezer Applications

Kason 10027C00034 is specified for appropriate commercial walk-in cooler and freezer doors with a flush-mounted hardware configuration and nominal 4-inch door thickness.

The manufacturer's hardware designation is 0027C SafeGuard. Exact equipment model-level compatibility is not established solely by this part number.

Commercial walk-in manufacturers may use different door thicknesses, offsets, latch positions and mounting arrangements. Confirm compatibility using the original latch identification and door assembly specifications.

Common Symptoms of Damaged Walk-In Locking Hardware

• Deadbolt does not engage the strike correctly.
• Exterior handle becomes loose or difficult to operate.
• Latch tongue or locking mechanism binds.
• Strike and deadbolt no longer align properly.
• Door becomes difficult to lock or unlock.
• Mounting hardware loosens or mounting points are damaged.
• Interior release mechanism does not operate smoothly.
• Visible cracking, bending or damage to the latch housing.
• Corrosion, contamination or mechanical wear interferes with operation.
• Door misalignment prevents proper latch engagement.

Safety Warning: A malfunctioning interior safety-release mechanism requires immediate attention. Do not rely on defective locking hardware for occupied walk-in spaces. Verify safe inside-release operation before returning the door to service.

Technician Troubleshooting Guide

• Identify the existing latch manufacturer and part number.
• Confirm the original door thickness and flush mounting arrangement.
• Inspect the deadbolt and strike for alignment problems.
• Examine the locking cylinder and operating components for damage.
• Check the outside handle and mounting points.
• Inspect the interior safety-release assembly.
• Confirm the matching strike is correctly positioned.
• Inspect door hinges and frame alignment for sagging.
• Check the gasket and door for interference with closing.
• Follow Kason's procedures when evaluating and adjusting the lock and inside release.

Before You Order

1. Confirm manufacturer part number 10027C00034.
2. Verify the original hardware is a Kason 0027C SafeGuard deadbolt latch.
3. Confirm that the door is nominally 4 inches thick.
4. Verify the door and frame have the correct flush relationship.
5. Check the original latch and strike mounting arrangement.
6. Confirm the required polished-chrome finish.
7. Verify that the original installation uses the appropriate quarter-turn interior release.
8. Compare the existing door hardware with the product photograph.
9. Confirm the lock cylinder, strike, release and fastener contents provided by the supplier.
10. Check the appropriate manufacturer installation and safety instructions before ordering.

Installation and Walk-In Safety

Installation should be completed by qualified commercial walk-in door service personnel using Kason's current 0027C installation instructions.

Before removing the original assembly, document the latch position, strike alignment, door thickness, existing fasteners and interior-release arrangement.

Install the correct locking assembly and corresponding strike according to the manufacturer's approved mounting dimensions and procedures.

Verify mechanical engagement, locking operation and inside-release function before placing the walk-in back into service. Do not obstruct, disable or omit the required interior safety release.

Confirm compliance with applicable door safety, emergency egress and local installation requirements.

Frequently Asked Questions

1. What is Kason 10027C00034?

It is a Kason 0027C SafeGuard deadbolt locking handle and latch configuration designed for compatible 4-inch-thick, flush-mounted commercial walk-in doors.

2. Does this Kason door latch include an interior safety release?

The manufacturer identifies 10027C00034 as a deadbolt latch supplied with a quarter-turn, low-conductivity inside release and strike. Confirm actual supplied contents before ordering.

3. What door thickness is required?

The manufacturer specifies this configuration for a nominal 4-inch-thick door. Other Kason configurations exist for different door thicknesses.

4. Is Kason 10027C00034 a locking or non-locking handle?

It is a locking deadbolt handle/latch assembly, not a plain non-locking pull handle.

5. What is the difference between 10027C00034 and 10027C00035?

Both are manufacturer-listed 4-inch door configurations with quarter-turn, low-conductivity inside release and strike. Part 10027C00034 has a chrome finish, while 10027C00035 is listed with a brushed-chrome finish.

6. Will this latch fit every walk-in cooler or freezer?

No. Door thickness, offset, mounting geometry, strike arrangement and original latch specification must match the replacement. Verify the complete door configuration before ordering.

7. Can a damaged strike prevent a walk-in door from locking?

Yes. Incorrect strike positioning, door sagging, mounting damage or worn locking components can prevent proper engagement. Inspect the complete latch and door assembly.

8. How do I confirm the correct Kason replacement latch?

Compare the existing manufacturer part number, 0027C configuration, door thickness, offset, exterior finish, inside-release design and mounting arrangement. Contact PartsDirectOnline with photographs and door specifications for assistance.

Kason Walk-In Cooler and Freezer Door Hardware

PartsDirectOnline supplies commercial walk-in door latches, locking handles, hinges, door closers, gaskets and safety-release components for refrigeration service technicians, maintenance departments and commercial equipment operators throughout the United States.

For identification guidance, visit our Kason Hardware Identification Guide.

Ordering Assistance: Call 631-873-0509 with the original latch part number, door thickness, offset measurements and photos before ordering.