Kason 11092000004 Hydraulic Walk-In Door Closer with Hook – Flush to 3/4" Offset

Kason 11092000004 Hydraulic Door Closer with Hook

The Kason 11092000004 is a 1092-series hydraulic closer supplied in the manufacturer's flush-to-3/4-inch offset hook configuration. This commercial replacement part helps control the final closing movement of a compatible walk-in refrigeration door.

Product Specifications

Function and Commercial Applications

The hydraulic mechanism slows closing movement and helps the door settle into its closed position. Kason identifies the 1092 series for walk-in doors and refrigerated boxes with merchandising doors, including applications where pressure changes can push doors open.

Selection depends on the existing hardware and installation dimensions. A matching equipment brand alone does not establish compatibility. Compare the closer, hook, mounting pattern and door-to-frame relationship before ordering.

Common Symptoms to Inspect

• The door reaches the closer but does not finish closing.
• The closing movement becomes abrupt or inconsistent.
• The roller fails to engage the hook correctly.
• The closer or hook shifts at its mounting points.
• The door repeatedly remains slightly open after use.

These symptoms can also result from worn hinges, loose fasteners, door sag or gasket interference. Inspect those conditions before deciding that the closer needs replacement.

Before You Order

• Match part number 11092000004 to the original component or service documentation.
• Measure the offset at the closer location with the door closed.
• Compare the mounting-hole spacing and available installation clearance.
• Inspect the hook and roller engagement throughout the closing movement.
• Confirm that the mounting surface can securely support the replacement.
• Arrange suitable mounting screws for the door and frame construction.

Installation and Service Notes

Follow the installation guidance supplied with the replacement. Have a qualified technician address damaged mounting holes, hinge wear or door misalignment before fitting the closer.

After installation, cycle the door repeatedly and verify secure mounting, smooth engagement and complete closure without binding. Inspect the gasket contact around the opening and confirm that the inside release remains functional.

Frequently Asked Questions

What offset does this part cover?

Part 11092000004 is the manufacturer-listed configuration for flush through 3/4-inch offset. Measure your installation before selecting it.

Does the manufacturer list this part with a hook?

Yes. The catalog identifies this part number as a closer with the matching offset hook. Confirm that your order is for that assembly when replacing both components.

Are installation screws included?

No. Select suitable fasteners for the mounting surface and the closer's specified mounting holes.

Is this the correct replacement for every Kason closer?

No. Series, hook configuration, mounting pattern and operating mechanism must agree with the intended installation. A similar appearance is insufficient.

Will a new closer fix a sagging door?

Door sag requires inspection of the hinges, mounting points and frame alignment. Correct those issues before evaluating the replacement closer.

Can I reuse my existing hook?

Only if its configuration, condition and engagement are confirmed suitable. Inspect for bending, wear and loose mounting before deciding to retain it.

What information helps confirm fit?

Provide the original part markings, measured offset, mounting-hole spacing and photographs showing the closer and hook together. Call 631-873-0509 for identification assistance.

Related Parts and Identification Help

• Kason hardware identification guide
• Browse walk-in door closers
• Browse walk-in door latches