Turbo Air Z673101000 Magnetic Door Gasket

Turbo Air Z673101000 Magnetic Door Gasket

Turbo Air Z673101000 identifies a black magnetic door gasket for compatible commercial refrigeration equipment. This replacement is listed at 24-1/4 by 26-3/4 inches. Match the full reference and the original mounting profile when selecting a door seal.

Specifications

Weight is a published catalog reference rounded for the shipping field; actual packed weight can vary.

Fitment and ordering checks

Match Z673101000 to the equipment parts diagram using the full model and serial number. No universal model fit is claimed; compare the original gasket profile before ordering.

The listed replacement size is 24-1/4 by 26-3/4 inches. Dimension listings for this reference can differ, so confirm the measurement convention, magnetic sealing face and attachment profile against the original gasket. Do not order by a nominal door size alone.

When to inspect the seal

Torn corners, hardened sections, loose seating or visible gaps can indicate a worn gasket. Condensation or uneven temperatures also warrant checking the closing hardware and sealing surface. A temperature problem alone does not identify the gasket as the failed component.

Frequently asked questions

What is Turbo Air Z673101000 used for?

Z673101000 identifies a replacement door gasket for compatible Turbo Air commercial refrigeration equipment. The seal closes the gap between the door and cabinet to limit warm-air entry during normal operation.

What size should I compare?

The listed replacement size is 24-1/4 by 26-3/4 inches. Dimension listings for this reference can differ, so confirm the measurement convention, magnetic sealing face and attachment profile against the original gasket. Do not order by a nominal door size alone.

Which equipment models are referenced?

Match Z673101000 to the equipment parts diagram using the full model and serial number. No universal model fit is claimed; compare the original gasket profile before ordering.

Will a new gasket fix a door that does not close?

Not necessarily. Check hinge alignment, latch operation, the mounting channel and sealing surface. A sagging door or damaged retainer can prevent even contact.

What should be checked during installation?

Follow the equipment service procedure, clean the mounting channel and avoid stretching the gasket. Seat the corners and straight sections evenly, then close the door and inspect contact around the full perimeter. Confirm normal closing movement and monitor cabinet temperature after service.

How can I verify Z673101000 before ordering?

Call PartsDirectOnline at 631-873-0509 with part reference Z673101000, the complete model and serial number, gasket measurements and details of the original mounting profile. Check whether the existing gasket was measured at its outside edges or attachment centerlines.

Browse commercial refrigerator door gaskets and Turbo Air replacement parts. Call 631-873-0509 for part-matching help.