Turbo Air P8F3300610 Magnetic Door Gasket

Turbo Air P8F3300610 is a magnetic door gasket for select commercial reach-in refrigerators and freezers. It seals the door perimeter to help limit warm-air entry when the door is closed. Match the part number and your equipment's complete model and serial number before ordering.

Part details

Documented model compatibility

Turbo Air's M3 HC service manual lists P8F3300610 for the following full-door models:

• M3R47-2-N — two-door refrigerator
• M3F47-2-N — two-door freezer
• M3R72-3-N — three-door refrigerator
• M3F72-3-N — three-door freezer

This fitment list applies to the stated full-door configurations. The manual specifies different gaskets for the split-door M3R47-4-N, M3F47-4-N, M3R72-6-N and M3F72-6-N models. Confirm the complete model suffix, serial number and existing gasket profile; do not select a gasket by cabinet width or appearance alone.

View the Turbo Air M3 HC service manual — parts list, printed page 23.

When to inspect or replace the gasket

Inspect the seal for torn corners, hardened sections, distortion or gaps against the cabinet. Moisture or frost near the door can be a reason to check the gasket, but it does not by itself prove the gasket is the cause. Check door alignment, hinges and the sealing surface as part of the diagnosis.

Ordering and installation guidance

• Compare P8F3300610 with the part number specified for your unit.
• Check the old gasket's mounting profile and all four corners. Similar-looking seals can have different mounting dimensions.
• Confirm how many doors need new seals; each quantity ordered is one gasket.
• Follow the equipment service instructions. Clean the mounting channel and sealing surface, seat the gasket evenly without stretching it, and check continuous contact around the closed door.

Frequently asked questions

What does Turbo Air P8F3300610 do?

It forms the seal around a compatible refrigeration door. A properly fitted gasket helps reduce air leakage when the door is closed.

Which Turbo Air models use this gasket?

The documented full-door models are M3R47-2-N, M3F47-2-N, M3R72-3-N and M3F72-3-N. Confirm your serial number and existing gasket before purchasing.

Does it fit the four-door or six-door M3 models?

Do not use this full-door fitment list for split-door models. The manufacturer's manual lists different gasket references for those configurations.

Is one order enough to replace every gasket on my cabinet?

No. This listing is sold individually. Count the compatible doors requiring replacement and order one gasket for each door.

Can I choose the gasket by measurements alone?

Use the part number, complete model and mounting profile together. Measurements taken at the outer edge and mounting centerline can differ, and a worn gasket may be distorted.

Will a new gasket fix frost, condensation or a door that will not close?

Only if a damaged or poorly sealing gasket is contributing to the problem. Door alignment, hinge wear, obstructions and other equipment conditions may also need attention.

What information should I send for help checking fit?

Send the full model and serial number, a photo of the equipment data plate, and clear photos of the gasket corner and mounting profile.

Need help matching your gasket?

PartsDirectOnline supports commercial refrigeration parts customers across the United States. Call 631-873-0509 or email jmatos@partsdirectonline.com with your equipment details. Browse more commercial refrigeration door gaskets.