Turbo Air M602300100 Door Gasket

Turbo Air M602300100 Door Gasket

Turbo Air M602300100 identifies a replacement door gasket for selected MST-60, MUR-60 and TST-60SD equipment. The supplied replacement is catalog-listed at 26-5/8 by 28 inches. A 60-inch equipment designation describes the cabinet family, not the gasket length.

Specifications

Weight is a published catalog reference rounded for the shipping field; actual packed weight can vary.

Fitment and ordering checks

Catalog model references include MST-60, MUR-60, TST-60SD. Verify the complete model, serial number and installed door configuration; model references do not establish fit for every production revision.

Confirm the complete M602300100 reference and original seal profile. This replacement is listed at 26-5/8 by 28 inches; dimension listings for the reference vary. Check the original gasket and measurement method before ordering, especially when comparing a listing with a different height.

When to inspect the seal

Torn corners, hardened sections, loose seating or visible gaps can indicate a worn gasket. Condensation or uneven temperatures also warrant checking the closing hardware and sealing surface. A temperature problem alone does not identify the gasket as the failed component.

Frequently asked questions

What is Turbo Air M602300100 used for?

M602300100 identifies a replacement door gasket for compatible Turbo Air commercial refrigeration equipment. The seal closes the gap between the door and cabinet to limit warm-air entry during normal operation.

What size should I compare?

Confirm the complete M602300100 reference and original seal profile. This replacement is listed at 26-5/8 by 28 inches; dimension listings for the reference vary. Check the original gasket and measurement method before ordering, especially when comparing a listing with a different height.

Which equipment models are referenced?

Catalog model references include MST-60, MUR-60, TST-60SD. Verify the complete model, serial number and installed door configuration; model references do not establish fit for every production revision.

Will a new gasket fix a door that does not close?

Not necessarily. Check hinge alignment, latch operation, the mounting channel and sealing surface. A sagging door or damaged retainer can prevent even contact.

What should be checked during installation?

Follow the equipment service procedure, clean the mounting channel and avoid stretching the gasket. Seat the corners and straight sections evenly, then close the door and inspect contact around the full perimeter. Confirm normal closing movement and monitor cabinet temperature after service.

How can I verify M602300100 before ordering?

Call PartsDirectOnline at 631-873-0509 with part reference M602300100, the complete model and serial number, gasket measurements and details of the original mounting profile. Check whether the existing gasket was measured at its outside edges or attachment centerlines.

Browse commercial refrigerator door gaskets and Turbo Air replacement parts. Call 631-873-0509 for part-matching help.