True 802436 Perimeter Heater Wire, 212 Inch, 115V

True 802436 Perimeter Heater Wire, 212 Inch, 115V

The True 802436 perimeter heater wire, 212 inch, 115v is a commercial replacement part identified by the manufacturer reference shown below. It provides distributed heat along the intended cabinet or door-perimeter route. Correct identification matters because components that share a general appearance can differ in mounting, electrical characteristics, dimensions or operating function.

Distinguish the 212-inch heater length from the 20-inch leads. Match the cabinet channel and routing; do not shorten the heater wire to change its fit.

Use the equipment model, serial number and existing part identification together when selecting this anti-sweat heater wire. The listed specifications describe the researched reference; they do not establish universal compatibility across True equipment. Inspect the related system before ordering so a separate wiring, alignment, airflow or drainage problem is not mistaken for failure of this component.

Part Identification & Specifications

• Compatible equipment brand: True
• Manufacturer part-number reference: 802436
• Product type: Anti-Sweat Heater Wire
• Product classification: Commercial Replacement Part
• Heated length: 212 inches
• Voltage: 115V
• Power per length: 1.7W per foot
• Lead length: 20 inches
• Reference catalogue weight: 0.125 lb

The listed weight is a published reference-part weight, not a measured packed-shipment weight. Genuine OEM manufacture of the supplied item has not been independently confirmed; this listing does not claim genuine OEM status.

Function & Application

This anti-sweat heater wire provides distributed heat along the intended cabinet or door-perimeter route. Its role should be checked against the equipment parts diagram and service documentation, including any production changes affecting the assembly.

Compatibility & Ordering Reference

Reference-catalogue equipment examples: GDM-49F, TS-49FG, T-49FZ. These examples are not an exhaustive fit list. Confirm the complete model and serial number before ordering.

Do not assume that another part number supersedes this reference unless the equipment manufacturer documents that replacement for the specific unit.

Symptoms to Investigate

Reasons to inspect this component include persistent condensation or icing along the heated area, damaged insulation, or an open heater circuit. These symptoms are diagnostic clues, not proof that this part has failed.

Technician Diagnostic Checks

• Identify the heated section separately from the connection leads
• Inspect the entire routing channel for damage
• Check supply and control operation
• Check gasket sealing and ambient moisture as contributing factors

Document the findings before replacing parts. Use the equipment service procedure and correct test equipment; component appearance alone does not establish a service diagnosis.

Before You Order

• Confirm manufacturer reference 802436 and the complete equipment model and serial number.
• Compare the existing part with the listed specifications and mounting arrangement.
• Distinguish the 212-inch heater length from the 20-inch leads. Match the cabinet channel and routing; do not shorten the heater wire to change its fit.
• Verify whether related fasteners, fittings, keys, sensors or other service items are included or required separately.
• Confirm the supplied item and its provenance before releasing the order.

Installation & Return-to-Service Checks

Service should be performed by personnel qualified for the equipment and component. Isolate relevant power and support moving parts before disassembly. Record the original mounting, connections and routing, then follow the equipment-specific service procedure.

Confirm the original route is preserved, connections are secure and the heated area operates normally without localized overheating.

Maintenance & Related Components

During routine service, inspect the surrounding mounting points and the related components identified in the diagnostic checks. Correct the cause of wear, moisture, vibration or misalignment before fitting a replacement. Use cleaning and maintenance methods specified for the equipment and materials.

Frequently Asked Questions

What is True 802436?

It is the manufacturer reference for this anti-sweat heater wire. The component provides distributed heat along the intended cabinet or door-perimeter route.

Which specifications should I compare?

Heated length: 212 inches; Voltage: 115V; Power per length: 1.7W per foot; Lead length: 20 inches. Also compare the original mounting and connection arrangement.

Will it fit every True unit?

No. Verify the complete model, serial number and manufacturer reference. Similar-looking components may belong to different equipment revisions.

What should I check before replacing it?

Identify the heated section separately from the connection leads. Inspect the entire routing channel for damage. Symptoms may come from related components, so diagnose the system before ordering.

What is the key ordering caution for this part?

Distinguish the 212-inch heater length from the 20-inch leads. Match the cabinet channel and routing; do not shorten the heater wire to change its fit.

Is the listed weight a packed shipping weight?

The reference catalogue lists 0.125 lb. Packed shipping weight has not been measured and can differ with packaging or supplied assembly contents.

Is this guaranteed to be genuine OEM?

Genuine OEM manufacture of the supplied item has not been independently confirmed. It is described as a Commercial Replacement Part using the researched manufacturer reference.

Related Refrigeration Parts

Browse True refrigeration parts and commercial refrigeration parts for related service components.