Traulsen 344-13140-01 Caster with Brake – 5" Wheel, 6" Height

Traulsen 344-13140-01 Caster with Brake – 5" Wheel, 6" Height

The Traulsen 344-13140-01 is a plate-mounted swivel caster with brake for compatible Traulsen commercial refrigeration equipment. Designed to support equipment mobility and positioning, this replacement caster features a 5-inch nominal wheel and approximately 6-inch installed load height.

Commercial refrigerators and freezers require properly selected caster assemblies to support equipment weight, maintain stability, and allow controlled movement during cleaning, positioning, and maintenance. A damaged wheel, loose mounting plate, or malfunctioning brake can affect safe equipment movement.

Important OEM Replacement Information: Traulsen 344-13140-01 is identified in manufacturer parts documentation. The original part is listed as obsolete by an OEM parts distributor, with Traulsen CK1 designated as a newer caster kit replacement. CK1 is a multiple-caster kit rather than a single replacement caster. Confirm which product is being supplied before ordering.

OEM Product Specifications

• Manufacturer: Traulsen
• OEM Part Number: 344-13140-01
• Product Type: Swivel Caster with Brake
• Mounting Style: Plate Mount
• Nominal Wheel Diameter: 5 inches
• Nominal Wheel Width: 1-1/2 inches
• Installed Load Height: Approximately 6 inches
• Published Mounting Plate Size: 4-5/8 inches x 3-3/4 inches; confirm actual assembly
• Brake: Included on the listed caster configuration
• Application: Select Traulsen commercial refrigeration equipment
• Service Replacement Reference: Traulsen CK1 caster kit
• Load Capacity: Verify against manufacturer specifications
• Quantity: Confirm the actual single-caster item supplied

Product Function and Purpose

The caster supports the refrigeration cabinet while allowing controlled movement across appropriate floor surfaces. Its swivel arrangement permits directional movement during equipment positioning.

The integrated brake is intended to restrain caster movement when properly engaged. Correct mounting, load capacity, equipment leveling, and caster operation are essential for maintaining equipment stability.

A defective caster can interfere with safe equipment movement, create uneven support, or prevent the cabinet from remaining securely positioned.

Features and Benefits

• Plate-mounted construction for compatible equipment bases.
• Swivel design for directional equipment movement.
• Integrated braking mechanism.
• 5-inch nominal wheel diameter.
• Approximately 6-inch installed load height.
• Replacement reference for compatible Traulsen refrigerated cabinets.
• Suitable for equipment mobility and maintenance applications when correctly specified.

Common Symptoms of a Damaged Caster

• Wheel does not rotate smoothly.
• Caster swivel mechanism binds or becomes difficult to turn.
• Brake fails to hold the caster securely.
• Wheel shows cracks, flat spots, or excessive wear.
• Mounting plate becomes loose or distorted.
• Equipment sits unevenly because of caster damage.
• Unusual grinding or rattling during movement.
• Visible corrosion or damaged axle components.

Technician Troubleshooting Guide

Before replacing a caster, inspect the equipment's complete wheel and mounting arrangement. Movement or stability problems may result from uneven floors, loose mounting hardware, incorrect caster height, overloaded casters, or damaged swivel bearings.

• Inspect the wheel tread for deterioration or cracking.
• Check that the wheel rotates freely.
• Inspect the swivel bearing and mounting structure.
• Test the caster brake for proper engagement and release.
• Check all mounting bolts for damage or looseness.
• Inspect the equipment base for distortion or corrosion.
• Confirm the required installed height and wheel size.
• Verify the appropriate caster load rating for the equipment.

Before You Order

1. Confirm the original Traulsen manufacturer part number is 344-13140-01.
2. Record the complete equipment model and serial number.
3. Verify the required 5-inch nominal wheel diameter and approximately 6-inch load height.
4. Compare the existing mounting plate dimensions and bolt-hole spacing.
5. Confirm the equipment requires a swivel caster with brake.
6. Verify the appropriate load rating and wheel configuration.
7. Determine whether you need one caster or a complete replacement caster kit.
8. Confirm whether the supplier will provide the original part or an approved replacement.

Installation and Safety Guidance

Commercial refrigeration equipment can be extremely heavy. Caster replacement should be performed by qualified personnel using appropriate lifting and support equipment.

Remove product loads as necessary, follow equipment-specific safety instructions, and support the cabinet securely before removing caster mounting hardware. Never rely solely on a jack or unsupported lifting device.

Inspect the mounting plate and equipment base before installation. Install the correct caster and approved fasteners according to Traulsen's applicable service documentation.

After installation, verify cabinet stability, wheel rotation, swivel movement, proper brake operation, and equipment leveling. Confirm that the unit remains stable during normal use.

Frequently Asked Questions

1. What is Traulsen 344-13140-01?

It is a Traulsen plate-mounted caster assembly identified in manufacturer service documentation for compatible commercial refrigeration equipment. Replacement suppliers list the configuration with a swivel mechanism and brake.

2. What size wheel does this Traulsen caster use?

Published replacement specifications identify a nominal 5-inch wheel diameter and 1-1/2-inch wheel width.

3. Is the caster 5 inches or 6 inches tall?

The wheel diameter is approximately 5 inches, while the installed load height is approximately 6 inches. These are different measurements.

4. Does this Traulsen caster have a brake?

Commercial replacement listings identify this caster configuration as a swivel caster with brake. Confirm the exact supplied item before ordering.

5. Has Traulsen 344-13140-01 been replaced?

Yes. An OEM parts distributor lists 344-13140-01 as obsolete and superseded by Traulsen CK1. The newer designation is for a caster kit, so verify kit contents and application before substituting.

6. Will this caster fit every Traulsen refrigerator or freezer?

No. Compatibility depends on the equipment model, serial number, mounting plate, installed height, load requirements, and original caster configuration.

7. Does this part include mounting bolts?

Do not assume mounting bolts are included with a single replacement caster. Traulsen identifies caster mounting bolts separately in applicable service documentation. Confirm the supplied hardware before purchase.

8. How do I determine the correct replacement caster?

Compare the original Traulsen part number, equipment model, mounting plate, bolt pattern, wheel diameter, installed height, brake arrangement, and required load rating. Contact PartsDirectOnline for identification assistance when needed.

Traulsen Commercial Refrigeration Casters and Replacement Parts

PartsDirectOnline supplies commercial refrigeration replacement casters, wheels, mounting hardware, hinges, gaskets, and other refrigeration equipment parts for service technicians, maintenance teams, restaurants, and commercial equipment operators throughout the United States.

Ordering Assistance: Provide the equipment model, serial number, and original caster information to confirm the correct replacement before purchasing.