Traulsen 341-21461-00 Drawer Gasket, 6-7/8 x 23-3/8 Inch

Traulsen 341-21461-00 Drawer Gasket, 6-7/8 x 23-3/8 Inch

The Traulsen 341-21461-00 drawer gasket, 6-7/8 x 23-3/8 inch is a commercial replacement part identified by the manufacturer reference shown below. It forms a flexible seal around the corresponding refrigerated door or drawer opening. Correct identification matters because components that share a general appearance can differ in mounting, electrical characteristics, dimensions or operating function.

Measure the existing gasket using the same reference points and compare its mounting profile. The corner image is a profile reference, not a scale drawing of the full frame.

Use the equipment model, serial number and existing part identification together when selecting this refrigerator drawer gasket. The listed specifications describe the researched reference; they do not establish universal compatibility across Traulsen equipment. Inspect the related system before ordering so a separate wiring, alignment, airflow or drainage problem is not mistaken for failure of this component.

Part Identification & Specifications

• Compatible equipment brand: Traulsen
• Manufacturer part-number reference: 341-21461-00
• Product type: Refrigerator Drawer Gasket
• Product classification: Commercial Replacement Part
• Listed dimensions: 6-7/8 x 23-3/8 inches
• Location: Drawer
• Reference catalogue weight: 0.9 lb

The listed weight is a published reference-part weight, not a measured packed-shipment weight. Genuine OEM manufacture of the supplied item has not been independently confirmed; this listing does not claim genuine OEM status.

Function & Application

This refrigerator drawer gasket forms a flexible seal around the corresponding refrigerated door or drawer opening. Its role should be checked against the equipment parts diagram and service documentation, including any production changes affecting the assembly.

Compatibility & Ordering Reference

A complete model compatibility list has not been established for this part. Confirm the part-number reference against the equipment parts diagram and serial-number range before ordering.

Do not assume that another part number supersedes this reference unless the equipment manufacturer documents that replacement for the specific unit.

Symptoms to Investigate

Reasons to inspect this component include tears, hardened or flattened sealing sections, loose corners, condensation at the seal, or warm air leakage. These symptoms are diagnostic clues, not proof that this part has failed.

Technician Diagnostic Checks

• Clean the gasket and mating surface before judging the seal
• Check door or drawer alignment and slide or hinge condition
• Compare mounting profile and corner shape
• Measure the frame using the specified reference points

Document the findings before replacing parts. Use the equipment service procedure and correct test equipment; component appearance alone does not establish a service diagnosis.

Before You Order

• Confirm manufacturer reference 341-21461-00 and the complete equipment model and serial number.
• Compare the existing part with the listed specifications and mounting arrangement.
• Measure the existing gasket using the same reference points and compare its mounting profile. The corner image is a profile reference, not a scale drawing of the full frame.
• Verify whether related fasteners, fittings, keys, sensors or other service items are included or required separately.
• Confirm the supplied item and its provenance before releasing the order.

Installation & Return-to-Service Checks

Service should be performed by personnel qualified for the equipment and component. Isolate relevant power and support moving parts before disassembly. Record the original mounting, connections and routing, then follow the equipment-specific service procedure.

Check contact around the entire opening and cycle the door or drawer. Confirm corners remain seated and the seal is not folded or stretched.

Maintenance & Related Components

During routine service, inspect the surrounding mounting points and the related components identified in the diagnostic checks. Correct the cause of wear, moisture, vibration or misalignment before fitting a replacement. Use cleaning and maintenance methods specified for the equipment and materials.

Frequently Asked Questions

What is Traulsen 341-21461-00?

It is the manufacturer reference for this refrigerator drawer gasket. The component forms a flexible seal around the corresponding refrigerated door or drawer opening.

Which specifications should I compare?

Listed dimensions: 6-7/8 x 23-3/8 inches; Location: Drawer. Also compare the original mounting and connection arrangement.

Will it fit every Traulsen unit?

No. Verify the complete model, serial number and manufacturer reference. Similar-looking components may belong to different equipment revisions.

What should I check before replacing it?

Clean the gasket and mating surface before judging the seal. Check door or drawer alignment and slide or hinge condition. Symptoms may come from related components, so diagnose the system before ordering.

What is the key ordering caution for this part?

Measure the existing gasket using the same reference points and compare its mounting profile. The corner image is a profile reference, not a scale drawing of the full frame.

Is the listed weight a packed shipping weight?

The reference catalogue lists 0.9 lb. Packed shipping weight has not been measured and can differ with packaging or supplied assembly contents.

Is this guaranteed to be genuine OEM?

Genuine OEM manufacture of the supplied item has not been independently confirmed. It is described as a Commercial Replacement Part using the researched manufacturer reference.

Related Refrigeration Parts

Browse Traulsen refrigeration parts and commercial refrigeration parts for related service components.