Traulsen 340-60074-02 Epoxy-Coated Wire Shelf, 23-1/2 x 26-3/8 Inch

Traulsen 340-60074-02 Epoxy-Coated Wire Shelf, 23-1/2 x 26-3/8 Inch

The Traulsen 340-60074-02 epoxy-coated wire shelf, 23-1/2 x 26-3/8 inch is a commercial replacement part identified by the manufacturer reference shown below. It supports the intended storage arrangement inside compatible refrigeration equipment. Correct identification matters because components that share a general appearance can differ in mounting, electrical characteristics, dimensions or operating function.

Compare support locations and shelf orientation. The sourcing description specifies gray epoxy while the reference image appears light-colored; confirm finish before release.

Use the equipment model, serial number and existing part identification together when selecting this refrigerator wire shelf. The listed specifications describe the researched reference; they do not establish universal compatibility across Traulsen equipment. Inspect the related system before ordering so a separate wiring, alignment, airflow or drainage problem is not mistaken for failure of this component.

Part Identification & Specifications

• Compatible equipment brand: Traulsen
• Manufacturer part-number reference: 340-60074-02
• Product type: Refrigerator Wire Shelf
• Product classification: Commercial Replacement Part
• Listed dimensions: 23-1/2 x 26-3/8 inches
• Coating: Epoxy
• Cabinet configuration: 2- or 3-section reference
• Reference catalogue weight: 5.09 lb

The listed weight is a published reference-part weight, not a measured packed-shipment weight. Genuine OEM manufacture of the supplied item has not been independently confirmed; this listing does not claim genuine OEM status.

Function & Application

This refrigerator wire shelf supports the intended storage arrangement inside compatible refrigeration equipment. Its role should be checked against the equipment parts diagram and service documentation, including any production changes affecting the assembly.

Compatibility & Ordering Reference

Reference-catalogue equipment examples: G22011R, G200XX (03/2004–10/2008), G21005P. These examples are not an exhaustive fit list. Confirm the complete model and serial number before ordering.

Do not assume that another part number supersedes this reference unless the equipment manufacturer documents that replacement for the specific unit.

Symptoms to Investigate

Reasons to inspect this component include a bent shelf, damaged coating, missing support hardware, or a clip that no longer engages the shelf standard securely. These symptoms are diagnostic clues, not proof that this part has failed.

Technician Diagnostic Checks

• Unload the shelf before inspection
• Check the cabinet supports and mounting slots
• Compare shelf dimensions and orientation
• Inspect all clips and supports as a system

Document the findings before replacing parts. Use the equipment service procedure and correct test equipment; component appearance alone does not establish a service diagnosis.

Before You Order

• Confirm manufacturer reference 340-60074-02 and the complete equipment model and serial number.
• Compare the existing part with the listed specifications and mounting arrangement.
• Compare support locations and shelf orientation. The sourcing description specifies gray epoxy while the reference image appears light-colored; confirm finish before release.
• Verify whether related fasteners, fittings, keys, sensors or other service items are included or required separately.
• Confirm the supplied item and its provenance before releasing the order.

Installation & Return-to-Service Checks

Service should be performed by personnel qualified for the equipment and component. Isolate relevant power and support moving parts before disassembly. Record the original mounting, connections and routing, then follow the equipment-specific service procedure.

Confirm every support is fully engaged and the shelf sits level. Follow the equipment load limit and maintain the original airflow clearances.

Maintenance & Related Components

During routine service, inspect the surrounding mounting points and the related components identified in the diagnostic checks. Correct the cause of wear, moisture, vibration or misalignment before fitting a replacement. Use cleaning and maintenance methods specified for the equipment and materials.

Frequently Asked Questions

What is Traulsen 340-60074-02?

It is the manufacturer reference for this refrigerator wire shelf. The component supports the intended storage arrangement inside compatible refrigeration equipment.

Which specifications should I compare?

Listed dimensions: 23-1/2 x 26-3/8 inches; Coating: Epoxy; Cabinet configuration: 2- or 3-section reference. Also compare the original mounting and connection arrangement.

Will it fit every Traulsen unit?

No. Verify the complete model, serial number and manufacturer reference. Similar-looking components may belong to different equipment revisions.

What should I check before replacing it?

Unload the shelf before inspection. Check the cabinet supports and mounting slots. Symptoms may come from related components, so diagnose the system before ordering.

What is the key ordering caution for this part?

Compare support locations and shelf orientation. The sourcing description specifies gray epoxy while the reference image appears light-colored; confirm finish before release.

Is the listed weight a packed shipping weight?

The reference catalogue lists 5.09 lb. Packed shipping weight has not been measured and can differ with packaging or supplied assembly contents.

Is this guaranteed to be genuine OEM?

Genuine OEM manufacture of the supplied item has not been independently confirmed. It is described as a Commercial Replacement Part using the researched manufacturer reference.

Related Refrigeration Parts

Browse Traulsen refrigeration parts and commercial refrigeration parts for related service components.