Traulsen 329-21613-00 Condensate Heater Element, 230V, 300W

Traulsen 329-21613-00 Condensate Heater Element, 230V, 300W

The Traulsen 329-21613-00 condensate heater element, 230v, 300w is a commercial replacement part identified by the manufacturer reference shown below. It adds controlled heat to the condensate arrangement so collected water can evaporate as designed. Correct identification matters because components that share a general appearance can differ in mounting, electrical characteristics, dimensions or operating function.

The reference catalogue identifies 230V; the sourcing listing uses 208–230V. Confirm the installed circuit and heater label before ordering. Do not substitute the 115V version.

Use the equipment model, serial number and existing part identification together when selecting this condensate heater element. The listed specifications describe the researched reference; they do not establish universal compatibility across Traulsen equipment. Inspect the related system before ordering so a separate wiring, alignment, airflow or drainage problem is not mistaken for failure of this component.

Part Identification & Specifications

• Compatible equipment brand: Traulsen
• Manufacturer part-number reference: 329-21613-00
• Product type: Condensate Heater Element
• Product classification: Commercial Replacement Part
• Voltage identification: 230V
• Power: 300W
• Reference catalogue weight: 1.5 lb

The listed weight is a published reference-part weight, not a measured packed-shipment weight.

Function & Application

This condensate heater element adds controlled heat to the condensate arrangement so collected water can evaporate as designed. Its role should be checked against the equipment parts diagram and service documentation, including any production changes affecting the assembly.

Compatibility & Ordering Reference

A complete model compatibility list has not been established for this part. Confirm the part-number reference against the equipment parts diagram and serial-number range before ordering.

Do not assume that another part number supersedes this reference unless the equipment manufacturer documents that replacement for the specific unit.

Symptoms to Investigate

Reasons to inspect this component include persistent water accumulation, a visibly damaged element, or an electrically open heater after proper diagnosis. These symptoms are diagnostic clues, not proof that this part has failed.

Technician Diagnostic Checks

• Inspect the pan and drain routing for contamination or blockage
• Verify the equipment voltage and heater identification
• Check connectors and insulation for damage
• Test the isolated heater using the manufacturer service procedure

Document the findings before replacing parts. Use the equipment service procedure and correct test equipment; component appearance alone does not establish a service diagnosis.

Before You Order

• Confirm manufacturer reference 329-21613-00 and the complete equipment model and serial number.
• Compare the existing part with the listed specifications and mounting arrangement.
• The reference catalogue identifies 230V; the sourcing listing uses 208–230V. Confirm the installed circuit and heater label before ordering. Do not substitute the 115V version.
• Verify whether related fasteners, fittings, keys, sensors or other service items are included or required separately.
• Confirm the supplied item and its provenance before releasing the order.

Installation & Return-to-Service Checks

Service should be performed by personnel qualified for the equipment and component. Isolate relevant power and support moving parts before disassembly. Record the original mounting, connections and routing, then follow the equipment-specific service procedure.

Check heater operation and water handling during a normal operating cycle. Confirm secure mounting and that leads are protected from heat and abrasion.

Maintenance & Related Components

During routine service, inspect the surrounding mounting points and the related components identified in the diagnostic checks. Correct the cause of wear, moisture, vibration or misalignment before fitting a replacement. Use cleaning and maintenance methods specified for the equipment and materials.

Frequently Asked Questions

What is Traulsen 329-21613-00?

It is the manufacturer reference for this condensate heater element. The component adds controlled heat to the condensate arrangement so collected water can evaporate as designed.

Which specifications should I compare?

Voltage identification: 230V; Power: 300W. Also compare the original mounting and connection arrangement.

Will it fit every Traulsen unit?

No. Verify the complete model, serial number and manufacturer reference. Similar-looking components may belong to different equipment revisions.

What should I check before replacing it?

Inspect the pan and drain routing for contamination or blockage. Verify the equipment voltage and heater identification. Symptoms may come from related components, so diagnose the system before ordering.

What is the key ordering caution for this part?

The reference catalogue identifies 230V; the sourcing listing uses 208–230V. Confirm the installed circuit and heater label before ordering. Do not substitute the 115V version.

Is the listed weight a packed shipping weight?

The reference catalogue lists 1.6 lb. Packed shipping weight has not been measured and can differ with packaging or supplied assembly contents.

Related Refrigeration Parts

Browse Traulsen refrigeration parts and commercial refrigeration parts for related service components.