Glastender 06003951 Genuine OEM Temperature Probe with 5' PVC Cable

Glastender 06003951 Genuine OEM Temperature Probe with 5' PVC Cable

The Glastender 06003951 is a Genuine OEM temperature probe designed for compatible Glastender commercial refrigeration equipment. The probe includes an approximately 5-foot PVC cable and provides temperature-sensing input to the equipment's digital temperature control system.

Glastender documentation identifies 06003951 for use with the 06003950 digital temperature switch in applicable equipment. The probe senses cabinet or refrigeration-system temperature and communicates that temperature condition to the connected control so the equipment can respond according to its programmed operating sequence.

Use Glastender manufacturer part number 06003951 as the primary identification reference when selecting this replacement. Always verify the equipment model, serial number, existing control, cable routing, and original sensor before ordering.

Product Details

• Manufacturer: Glastender
• Manufacturer Part Number / MPN: 06003951
• Part Type: Temperature Probe / Temperature Sensor
• Classification: Genuine OEM
• Cable: PVC
• Cable Length: Approximately 5 ft.
• Control Reference: Digital Temperature Switch 06003950
• Application: Commercial Refrigeration Equipment
• Function: Temperature sensing for digital refrigeration control

What the Glastender 06003951 Temperature Probe Does

The Glastender 06003951 monitors temperature at its installed sensing location and provides that temperature information to the connected digital control.

The refrigeration controller uses temperature feedback from the probe as part of the equipment's operating sequence. Accurate sensor input is important because an incorrect or intermittent temperature signal can affect how the control responds to changing cabinet conditions.

Designed for Glastender Digital Temperature Control Systems

Glastender service documentation identifies the 06003951 probe for use with compatible digital temperature-switch applications, including the 06003950 digital temperature switch.

The temperature probe and controller perform different functions. The probe senses temperature, while the digital controller interprets the sensor input and manages the applicable refrigeration control sequence.

5-Foot PVC Sensor Cable

The Glastender 06003951 is supplied with an approximately 5-foot PVC cable. The cable allows the sensing portion of the probe to be positioned in its intended equipment location while connecting to the digital temperature control.

When servicing the probe, follow the original cable-routing path whenever possible. Avoid pinching, cutting, sharply bending, or routing the sensor cable where it can contact fan blades, hot surfaces, sharp sheet-metal edges, or moving components.

Documented Glastender Applications

Glastender parts documentation and current equipment catalogs associate 06003951 with multiple commercial refrigeration families, including examples such as:

• BB60, BB84 and related Back Bar Cooler configurations
• ND52, ND72 and ND92 Narrow Door Cooler configurations
• KC Series vertical coolers
• LP Series vertical coolers
• Applicable BLC refrigeration equipment

Additional Glastender models may use this probe. Model references should not replace an exact manufacturer part-number and serial-number check because production and control-system revisions can occur.

Common Signs a Temperature Probe May Need Service

• Digital control displays an implausible temperature
• Temperature reading changes erratically
• Control indicates a sensor or probe fault
• Probe cable is cut, pinched, or damaged
• Connector or wiring is physically damaged
• Temperature display remains fixed despite cabinet temperature changes
• Refrigeration control responds incorrectly because of an inaccurate sensor signal
• Probe fails resistance or diagnostic testing according to the equipment service procedure

These symptoms do not automatically confirm a failed temperature probe. Similar problems can be caused by wiring, connectors, the digital temperature control, improper sensor placement, or other refrigeration-system conditions.

Technician Service Information

Before replacing the Glastender 06003951, inspect the complete sensor circuit and verify the condition of the probe cable, connectors, wiring, and digital control.

Compare the displayed temperature with a known accurate test thermometer. If the displayed value does not reasonably correspond with actual cabinet temperature, additional sensor and control diagnosis may be required.

After installing the replacement probe, route and secure the cable according to the original equipment configuration and confirm that the digital control displays a reasonable temperature before returning the equipment to service.

Before You Order

Confirm Glastender manufacturer part number 06003951 before ordering. Do not select a temperature probe based only on appearance or cable length.

Verify the following:

• Glastender manufacturer part number 06003951
• Equipment model number
• Equipment serial number
• Approximately 5-foot cable requirement
• Original probe configuration
• Digital temperature control configuration
• Connector and wiring arrangement
• Probe location and cable-routing path

If the original manufacturer number cannot be confirmed, compare the equipment model, serial number, existing digital control, probe connection, and original sensor configuration before ordering.

Frequently Asked Questions

What is Glastender part number 06003951?
Glastender 06003951 is a Genuine OEM temperature probe used with compatible Glastender commercial refrigeration equipment.

How long is the cable on Glastender 06003951?
The probe is supplied with an approximately 5-foot PVC cable.

What control is Glastender 06003951 used with?
Glastender documentation identifies 06003951 for use with compatible digital temperature-control applications, including digital temperature switch 06003950.

Is Glastender 06003951 a thermostat?
No. It is a temperature-sensing probe. The connected digital control uses the probe's temperature input as part of the refrigeration control sequence.

Is Glastender 06003951 Genuine OEM?
Yes. Current commercial parts catalogs identify 06003951 as a Genuine OEM Glastender replacement probe.

Can a bad temperature probe cause an incorrect display reading?
Yes. A damaged probe, cable, connector, or sensor circuit can contribute to inaccurate or unstable temperature readings. The control and wiring should also be checked during diagnosis.

Does Glastender 06003951 fit Back Bar and Narrow Door coolers?
Glastender documentation associates 06003951 with multiple BB and ND refrigeration models. Always verify the exact equipment model, serial number, and original probe before ordering.

How do I confirm Glastender 06003951 is the correct replacement?
Match manufacturer part number 06003951 whenever possible and verify the equipment model, serial number, cable length, control configuration, connector, and original probe installation.

Glastender Commercial Refrigeration Controls & Sensors

The Glastender 06003951 temperature probe is designed for commercial refrigeration applications requiring the specified digital temperature-sensing configuration. Accurate manufacturer part-number and equipment identification helps reduce incorrect orders and supports proper refrigeration control operation.