Glastender 06001383 Genuine OEM Lexan Evaporator Fan Guard

Glastender 06001383 Genuine OEM Lexan Evaporator Fan Guard

The Glastender 06001383 is a Genuine OEM Lexan evaporator fan guard designed for compatible Glastender commercial refrigeration equipment. The guard installs over the evaporator fan area to provide a protective barrier around the rotating fan blade while maintaining the open airflow path required for normal refrigeration operation.

Use Glastender manufacturer part number 06001383 as the primary identification reference when selecting this replacement. Glastender service documentation also identifies an older reference of GT-032301 for this evaporator fan guard.

Because Glastender refrigeration equipment can vary by model, serial number, cabinet configuration, and production revision, always compare the original fan guard, mounting points, dimensions, and equipment information before ordering.

Product Details

• Manufacturer: Glastender
• Manufacturer Part Number / MPN: 06001383
• Legacy Reference: GT-032301
• Part Type: Evaporator Fan Guard
• Classification: Genuine OEM
• Material: Lexan
• Approximate Length: 6.75"
• Approximate Width: 6.7"
• Approximate Height: 0.9"
• Application: Commercial Refrigeration Equipment
• Function: Evaporator fan protection while maintaining airflow

What the Glastender 06001383 Fan Guard Does

The Glastender 06001383 forms a protective barrier over the evaporator fan opening. Its open-grid design allows air to move through the fan area while helping reduce accidental contact with the rotating fan blade.

Proper evaporator airflow is essential for commercial refrigeration performance. The guard must remain securely mounted without contacting the fan blade or restricting the air path through the evaporator compartment.

Lexan Fan Guard Construction

Glastender identifies the 06001383 as a Lexan evaporator fan guard. The clear guard design provides physical protection around the fan while allowing the evaporator assembly and surrounding area to remain visible during inspection and service.

Do not substitute a generic metal or plastic fan guard based only on approximate diameter. Mounting-tab location, overall size, clearance, and original equipment configuration must agree with the installed assembly.

Documented Glastender Applications

Glastender service documentation identifies 06001383 for evaporator fan applications including selected BB, ND, KC, LP and related cooler configurations.

Documented application references include configurations such as:

• BB36
• BB60
• BB84
• ND52
• ND52R
• ND72 and related configurations
• LP Series refrigeration equipment
• Additional compatible non-endwall Glastender cooler configurations

Model references are provided as identification guidance only. Always verify the exact equipment model, serial number, original manufacturer part number, and existing fan-guard configuration before ordering.

Common Reasons for Replacement

• Fan guard is cracked or broken
• Mounting tabs are damaged
• Guard is missing from the evaporator assembly
• Guard has become distorted
• Fan blade contacts the damaged guard
• Original guard no longer mounts securely
• Guard was damaged during cleaning or refrigeration service
• Evaporator fan assembly is being restored to its original configuration

Why Evaporator Fan Protection Matters

The evaporator fan moves air through the refrigerated cabinet and across the evaporator section. The fan guard provides separation between the moving fan blade and surrounding cabinet space while allowing the fan to move air through the assembly.

A damaged or incorrectly installed guard can interfere with the fan blade, create unwanted noise or vibration, or leave the moving fan more exposed than intended.

Technician Service Information

Disconnect equipment power before servicing the evaporator fan area.

Before replacing the Glastender 06001383, inspect:

• Fan blade condition
• Evaporator fan motor
• Fan motor mounting bracket
• Guard mounting tabs and attachment points
• Fan-blade clearance
• Evaporator area for ice or debris
• Surrounding wiring and refrigeration components

After installation, rotate the fan blade by hand with power disconnected to verify adequate clearance. Restore power and confirm that the fan operates without contacting the guard or creating abnormal vibration or noise.

Before You Order

Confirm Glastender manufacturer part number 06001383 before ordering. Do not select an evaporator fan guard based only on appearance.

Verify the following:

• Glastender manufacturer part number 06001383
• Legacy reference GT-032301 when applicable
• Equipment model number
• Equipment serial number
• Original fan-guard dimensions
• Mounting-tab location and spacing
• Fan-blade clearance
• Original evaporator assembly configuration

If the original manufacturer number cannot be confirmed, compare the equipment model, serial number, mounting configuration, dimensions, and existing evaporator fan assembly before ordering.

Frequently Asked Questions

What is Glastender part number 06001383?
Glastender 06001383 is a Genuine OEM evaporator fan guard used on compatible Glastender commercial refrigeration equipment.

What material is Glastender 06001383 made from?
Glastender identifies the 06001383 evaporator fan guard as Lexan.

What are the dimensions of Glastender 06001383?
Current parts documentation lists the guard at approximately 6.75" long by 6.7" wide by 0.9" high.

Is GT-032301 related to Glastender 06001383?
Yes. Glastender service documentation identifies GT-032301 as an older part reference associated with 06001383.

What does an evaporator fan guard do?
The guard provides a protective barrier around the evaporator fan while maintaining an open path for refrigeration airflow.

Can a damaged fan guard cause noise?
Yes. If a cracked, distorted, or incorrectly mounted guard contacts the rotating fan blade, it can produce rubbing, vibration, or other abnormal noise.

Does Glastender 06001383 fit ND and BB Series coolers?
Glastender documentation associates 06001383 with multiple BB and ND cooler configurations. Always verify the exact model, serial number, and original guard before ordering.

How do I confirm Glastender 06001383 is the correct replacement?
Match manufacturer part number 06001383 whenever possible and verify the equipment model, serial number, guard dimensions, mounting-tab configuration, and original evaporator fan assembly.

Glastender Commercial Refrigeration Evaporator Parts

The Glastender 06001383 evaporator fan guard is designed for commercial refrigeration applications requiring the specified Lexan fan-protection configuration. Accurate manufacturer part-number, equipment, mounting, and dimensional verification helps reduce incorrect orders and supports proper evaporator fan operation.