Glastender 06001304 Genuine OEM Door Gasket – 23-1/2" x 32-1/2", Black, Push-In

Product Overview

Glastender 06001304 is a genuine OEM magnetic refrigerator door gasket designed for select Glastender commercial refrigeration equipment. This black four-sided gasket measures approximately 23-1/2" x 32-1/2" outside dimensions and uses a push-in / dart-style mounting profile that seats into the existing door gasket retainer.

A properly sealing door gasket helps reduce warm, humid air infiltration into the refrigerated cabinet. This supports stable cabinet temperatures, limits condensation and frost around the door opening, and helps prevent unnecessary refrigeration system run time.

Product Identification

• Manufacturer: Glastender
• OEM / MPN: 06001304
• Legacy Glastender Reference: GT-031307
• Part Type: Magnetic Door Gasket
• Application: Commercial Refrigeration
• Outside Dimensions: 23-1/2" x 32-1/2"
• Color: Black
• Mounting Style: Push-In / Dart
• Configuration: Four-Sided Magnetic Gasket

Function & Purpose

The Glastender 06001304 gasket creates the flexible magnetic seal between the refrigerated door and the cabinet. When the door closes, the gasket helps maintain even contact around the perimeter of the opening.

This seal helps reduce the amount of warm outside air and moisture entering the refrigerated space. A damaged, hardened, torn, loose, or incorrectly seated gasket can contribute to poor temperature recovery, condensation, frost buildup, and increased refrigeration run time.

Common Signs the Door Gasket Should Be Inspected

Inspection may be appropriate when technicians observe:

• Condensation or moisture around the door opening
• Frost or ice developing near the door perimeter
• Visible tears, cracks, or hardened gasket material
• Sections of the gasket pulling away from the door
• A door that no longer seals evenly against the cabinet
• Warm-air gaps around corners or edges
• Longer refrigeration run times
• Slow temperature recovery after the door is closed

These symptoms can have more than one cause. Door alignment, hinges, closing hardware, gasket retainers, and cabinet condition should also be inspected before replacing parts.

Technician Inspection Tips

Before replacing the gasket, inspect the entire door perimeter with the door closed. Pay particular attention to:

• Upper and lower gasket corners
• The hinge side of the door
• Areas where the gasket appears compressed or distorted
• Sections that do not contact the cabinet evenly
• The gasket retaining track
• Door alignment and hinge condition

A new gasket cannot correct a severely misaligned door, damaged gasket retainer, or failing hinge assembly.

Commercial Applications

Glastender 06001304 is used on select Glastender commercial refrigeration equipment, including back-bar coolers, reach-in refrigeration units, and keg or beer cooler configurations.

Verified applications include select configurations within Glastender BB, DS, KC, ND, and PT series equipment. Documented model references include:

• BB36-D
• BB60
• BB60-H
• BB84
• BB84-H
• DS24
• DS48
• DS72
• KC24
• KC-84
• ND48
• PT48
• PT72
• PT96

Important: Equipment configuration and production date can affect compatibility. Always verify the OEM number, model, serial information, gasket dimensions, and mounting profile before ordering.

Specifications

• Manufacturer: Glastender
• OEM / MPN: 06001304
• Legacy Reference: GT-031307
• Part Type: Door Gasket
• Application: Commercial Refrigeration
• Outside Dimensions: 23-1/2" x 32-1/2"
• Color: Black
• Mounting Style: Push-In / Dart
• Seal Type: Magnetic
• Configuration: Four-Sided Gasket
• Condition: New

Before You Order

For the most accurate part identification, compare the Glastender OEM number 06001304, equipment model, and serial tag with the installed gasket.

Measure the existing gasket using the same outside-to-outside reference and confirm that the existing gasket uses a push-in / dart mounting profile.

If the gasket dimensions appear correct but the mounting profile is different, do not assume the part is interchangeable.

PartsDirectOnline recommends identifying commercial refrigeration parts by OEM number whenever possible rather than ordering solely by appearance or dimensions.

Frequently Asked Questions

What is Glastender 06001304?

Glastender 06001304 is a magnetic commercial refrigeration door gasket measuring approximately 23-1/2" x 32-1/2" outside dimensions. It uses a push-in / dart-style mounting profile.

Is Glastender 06001304 a genuine OEM replacement part?

Yes. 06001304 is a Glastender manufacturer part number for this commercial refrigeration door gasket.

What is the older part number for Glastender 06001304?

The documented legacy Glastender reference associated with this gasket is GT-031307.

What size is the Glastender 06001304 gasket?

The documented outside dimensions are approximately 23-1/2 inches x 32-1/2 inches.

Is Glastender 06001304 a screw-on gasket?

No. Glastender 06001304 uses a push-in / dart-style mounting profile. Confirm the mounting style of the existing gasket before ordering.

What Glastender models use 06001304?

Documented applications include select BB, DS, KC, ND, and PT series equipment, including models such as BB36-D, BB60, BB84, KC-84, PT48, PT72, and PT96. Always verify the equipment model and serial information before ordering.

How can I tell if my refrigerator door gasket needs replacement?

Common indicators include visible tears, hardened gasket material, condensation near the door opening, frost around the perimeter, uneven door sealing, warm-air gaps, and increased refrigeration run time. Door alignment and hinge condition should also be inspected because they can create similar symptoms.

Will replacing the gasket fix a door that does not close correctly?

Not necessarily. Inspect the door hinges, closing hardware, alignment, gasket retainer, and door condition first. A new gasket will not correct a mechanical door-alignment problem.