Everest DF01-00 Defrost Heater, 115V, 350W

Everest DF01-00 Defrost Heater

The Everest DF01-00 is identified as defrost heater, 115v, 350w. This component supplies heat to the assigned defrost section when the equipment control calls for it. Match the manufacturer reference to the equipment documentation so the replacement addresses the correct assembly and operating application.

Verified part identification and specifications

Commercial application and model references

Documented equipment model references include ESF2, ESR2, ESRF3. Confirm the exact model suffix, serial range and component revision before ordering.

Symptoms and technician checks

Inspect this component when the equipment shows persistent ice after a defrost cycle or a confirmed open heater circuit. Check element shape, mounting, electrical rating, leads and the defrost control circuit before attributing the fault to this part. These symptoms guide diagnosis; they do not establish that replacement is necessary.

Ice buildup may also result from failed termination, airflow problems or control faults. Confirm the heater circuit and the correct element before replacement.

Before you order

Use manufacturer reference DF01-00 and compare the item identification above with the removed part. Check the model and serial label, the corresponding parts diagram and any revision or serial break. Confirm the component supplied rather than assuming related brackets, wiring or accessories are included.

Frequently asked questions

What is Everest DF01-00?

It is identified as defrost heater, 115v, 350w. It supplies heat to the assigned defrost section when the equipment control calls for it.

Which models are referenced for DF01-00?

Documented equipment model references include ESF2, ESR2, ESRF3. Confirm the exact model suffix, serial range and component revision before ordering.

What specifications distinguish DF01-00?

Electrical identification: 115V; Power: 350W; Documented catalog weight: 3 lb.

Can a heater with a similar shape be substituted?

Match the manufacturer number, voltage, wattage, connections and mounting dimensions. Similar shape alone does not establish an electrically suitable replacement.

What should be checked before replacing DF01-00?

Check element shape, mounting, electrical rating, leads and the defrost control circuit. Ice buildup may also result from failed termination, airflow problems or control faults. Confirm the heater circuit and the correct element before replacement.

What information should I provide to confirm DF01-00?

Provide the equipment model and serial number, the number on the removed component and a clear photograph of its connections or mounting. Ask for confirmation of Everest DF01-00 against the equipment diagram.

Browse Everest replacement parts for related service components.