Continental 50207 OEM Condensate Drain Pan with Heater – 115V 160W

Continental 50207 OEM Condensate Drain Pan with Heater – 115V 160W

The Continental Refrigeration 50207 Condensate Drain Pan is a genuine OEM commercial refrigeration drain-pan assembly equipped with a condensate evaporator heater. Rated for 115V and 160W and supplied with an 8-foot cord, this assembly is designed to collect refrigeration condensate and provide controlled heat that helps evaporate collected water during normal equipment operation.

Proper condensate management is important in commercial refrigeration because water that does not drain or evaporate correctly can contribute to overflow, standing water, floor moisture, corrosion, electrical concerns, and service interruptions.

When qualified diagnosis confirms that the original drain pan or condensate evaporator assembly requires replacement, using the correct Continental OEM 50207 helps restore the original condensate-management configuration intended for compatible Continental refrigeration equipment.

OEM Part Details & Specifications

• Manufacturer: Continental Refrigeration
• OEM Part Number: 50207
• MPN: 50207
• Part Type: Condensate Drain Pan with Evaporator Heater
• Voltage: 115V
• Wattage: 160W
• Cord Length: 8 ft.
• Application: Commercial Refrigeration Equipment
• System: Condensate Drainage / Evaporation
• Function: Condensate Collection & Water Evaporation

What the Continental 50207 Drain Pan Does

The Continental 50207 condensate pan collects water produced by the refrigeration system and uses its integrated heating function to support evaporation of that condensate. This helps reduce the need for water to remain standing in the pan or overflow into the equipment area.

Proper condensate-pan operation helps support:

• Controlled collection of refrigeration condensate
• Evaporation of collected water
• Reduced standing water
• Reduced risk of drain-pan overflow
• Cleaner equipment operation
• Reduced floor moisture around the unit
• Dependable commercial refrigeration service

115V, 160W Condensate Evaporator Heater

The Continental 50207 is identified with a 115V, 160W condensate evaporator heater. Both voltage and wattage are important replacement specifications and should match the original equipment configuration.

Do not substitute another heated drain pan based solely on physical appearance. Similar pans may use different voltages, heater wattages, electrical connections, cord lengths, dimensions, mounting points, or equipment applications.

8-Foot Power Cord

This assembly is supplied with an approximately 8-foot electrical cord. Cord length and routing should be compared with the original installation so the replacement can be connected without stretching, pinching, or creating interference with moving or heated components.

Common Signs of a Condensate Drain Pan or Heater Problem

Qualified commercial refrigeration technicians may inspect the Continental 50207 when troubleshooting conditions such as:

• Standing water remains in the condensate pan
• Drain pan repeatedly overflows
• Water collects beneath the refrigeration equipment
• Condensate does not evaporate during normal operation
• Heater does not warm when energized
• Heater operates intermittently
• Electrical cord or terminals show damage
• Drain pan is corroded, cracked, or physically damaged
• Water leaks from the pan area
• Moisture or corrosion develops around nearby equipment components

These symptoms do not automatically confirm that the 50207 assembly itself has failed. Excessive condensate production, drainage restrictions, door-gasket leakage, high ambient humidity, defrost problems, wiring issues, or other refrigeration conditions can create similar symptoms. Diagnose the complete condensate system before replacing the assembly.

Diagnosing Standing Water in the Drain Pan

If water remains in the pan, technicians should determine whether the problem is caused by the heating element, excessive condensate production, drainage conditions, or an electrical supply problem.

Depending on the equipment configuration, inspect:

• 115V electrical supply to the heater
• Heater operation
• Electrical cord and connectors
• Drain-pan condition
• Condensate volume
• Drainage path
• Door sealing
• Defrost operation
• Ambient humidity

Diagnosing a Drain Pan That Overflows

An overflowing condensate pan does not automatically mean the pan is defective. Overflow may occur if more water enters the pan than the heater can evaporate or if another refrigeration-system condition produces excessive condensate.

Possible areas to inspect include:

• Condensate evaporator heater
• Water drainage path
• Door gasket leakage
• Warm-air infiltration
• Defrost-system operation
• Equipment leveling
• Ambient temperature and humidity
• Pan positioning

Inspect the Heater Circuit

If the pan fills but the collected water is not evaporating, qualified technicians should verify that the heater receives the correct electrical supply and that the electrical circuit is intact.

Inspect for:

• Correct 115V supply
• Damaged cord
• Loose terminals
• Burned connectors
• Broken conductors
• Corrosion
• Heat-damaged insulation
• Evidence of electrical arcing

Any wiring or connection problem should be corrected before the replacement drain-pan assembly is energized.

Inspect the Drainage System

The condensate pan is only one part of the equipment's moisture-management system. A blocked or misdirected drain path can create water problems even when the pan and heater are operating correctly.

Check applicable:

• Drain tubes
• Drain fittings
• Evaporator drain
• Defrost drainage
• Pan position
• Equipment leveling
• Debris or scale restrictions

Door Gaskets & Excess Condensate

A leaking refrigeration door gasket can allow warm, humid air into the cabinet and increase the amount of moisture the refrigeration system must remove.

If condensate volume appears excessive, inspect the door system for:

• Torn or flattened gaskets
• Door misalignment
• Loose hinges
• Incomplete door closure
• Visible air gaps
• Repeated door openings

Correcting air infiltration can reduce unnecessary condensate production and refrigeration load.

Technician Checks Before Ordering

Before ordering Continental 50207, verify:

• OEM part number 50207
• Complete Continental equipment model
• Equipment serial number
• 115V electrical requirement
• 160W heater requirement
• 8-foot cord configuration
• Original drain-pan shape and dimensions
• Mounting arrangement
• Electrical connector / cord routing
• Condensate inlet location
• Available clearance around the pan

Do not order by pan shape alone. Heated drain pans can have similar appearances while using different electrical ratings, dimensions, cord lengths, mounting points, and equipment applications.

Commercial Refrigeration Applications

Continental commercial refrigeration equipment is used in demanding foodservice environments including:

• Restaurants
• Commercial kitchens
• Hotels
• Schools
• Hospitals
• Universities
• Institutional kitchens
• Supermarkets
• Convenience stores
• Foodservice facilities

Installation & Electrical Safety Notes

Disconnect electrical power before servicing commercial refrigeration condensate or heater components.

Before removing the original assembly, document:

• Drain-pan orientation
• Mounting position
• Electrical cord routing
• Condensate entry point
• Relationship to surrounding refrigeration components

Compare the replacement Continental 50207 with the original pan before installation.

After installation, verify:

• The pan sits securely in the intended position
• Condensate enters the pan correctly
• The electrical cord is routed safely
• No wiring contacts sharp or excessively hot surfaces
• The heater operates correctly
• No water leaks are present
• Condensate is managed normally during equipment operation

Commercial refrigeration heater and condensate components should be diagnosed and installed by qualified refrigeration service personnel.

Why Correct Continental OEM Identification Matters

Condensate drain pans with evaporator heaters can appear similar while using different voltages, wattages, dimensions, cord lengths, mounting configurations, and equipment applications.

Using Continental Refrigeration OEM part number 50207 together with the verified 115V, 160W, 8-foot cord specifications provides a much stronger replacement reference than selecting by appearance alone.

Frequently Asked Questions

What is Continental 50207?

Continental 50207 is a genuine OEM condensate drain pan with condensate evaporator heater used in compatible Continental commercial refrigeration equipment.

What voltage is Continental 50207?

The assembly is identified for 115V operation.

What wattage is the heater?

The integrated condensate evaporator heater is rated at 160W.

How long is the power cord?

Published parts data identifies an 8-foot cord.

What does the condensate evaporator do?

The heater provides controlled heat to the drain pan to help evaporate collected refrigeration condensate.

Can a bad drain-pan heater cause water to overflow?

Yes. If the heater does not evaporate condensate properly, water may accumulate. Excessive condensate or drainage problems can produce the same symptom.

Can a leaking door gasket cause extra condensate?

Yes. Warm, humid air entering through a poor door seal can increase moisture accumulation inside refrigeration equipment.

Should the drain system be inspected before replacing the pan?

Yes. Verify drainage, pan positioning, condensate flow, and heater operation before concluding that the complete pan assembly requires replacement.

Does Continental 50207 have a verified model-fitment list?

A reliable public model list is not currently provided by the parts source used for this listing. Verify the complete Continental model and serial number before ordering.

Can I replace 50207 with another 115V heated drain pan?

No. Verify OEM part number 50207, wattage, dimensions, cord length, mounting arrangement, model, and serial number before ordering.

How do I confirm Continental 50207 is correct?

Verify OEM part number 50207, the complete Continental model and serial number, 115V rating, 160W heater, 8-foot cord, pan configuration, and mounting arrangement before ordering.

Is professional installation recommended?

Yes. Commercial refrigeration electrical and condensate-management components should be diagnosed and installed by qualified refrigeration service personnel.

Why Buy From Parts Direct Online?

Parts Direct Online supplies OEM commercial refrigeration drain pans, evaporator heaters, fan motors, controls, gaskets, defrost parts, and related replacement components for service technicians, contractors, restaurants, supermarkets, hotels, institutional kitchens, and foodservice facilities throughout the United States.