Beverage-Air 515-123D Replacement Temperature Sensor Harness

Beverage-Air 515-123D Temperature Sensor Harness

Commercial replacement part. Beverage-Air 515-123D provides temperature information to a compatible refrigeration controller. The correct sensor and connector arrangement let the control monitor the intended location in the cabinet.

When to inspect or replace this part

Inspect the sensor and harness when the controller displays a probe fault, reports an implausible temperature or fails to respond consistently. Loose connections, damaged insulation, moisture at a connector and controller faults should be checked before a sensor is replaced.

Specifications

Compatibility and ordering checks

A model-specific compatibility list has not been confirmed for this reference. Match the original part number and verify the equipment's serial-specific parts list before ordering.

Match the original part number, controller type, connector, lead length and sensing location. Cabinet-air and evaporator sensors are not automatically interchangeable, even when their plugs look similar.

Installation and service

Disconnect power before handling wiring. A qualified technician should route the lead away from moving components, restore the original sensor position and compare the controller reading with an independent thermometer after service.

Frequently asked questions

What is the 515-123D used for?

Beverage-Air 515-123D provides temperature information to a compatible refrigeration controller. The correct sensor and connector arrangement let the control monitor the intended location in the cabinet.

Which models use 515-123D?

A model-specific compatibility list has not been confirmed for this reference. Match the original part number and verify the equipment's serial-specific parts list before ordering.

Can this sensor be used with any digital controller?

No. The sensor's electrical characteristic and connector must match the controller and the equipment's approved parts list.

Is a cabinet sensor interchangeable with a defrost sensor?

Do not assume interchangeability. Confirm the application, sensing location and original part reference.

Should extra lead length be cut off?

Follow the equipment manufacturer's wiring guidance. Changes to the harness, connector or splice locations can affect reliability.

What should be checked after replacement?

Confirm that the probe fault clears, the reading is plausible and the wiring stays clear of sharp edges and moving parts.

Need help confirming the replacement? Have the model, serial number and original part number ready and call 631-873-0509.

Browse Beverage-Air replacement parts and commercial refrigeration parts.