Anthony 15-10064-0001 Top Bracket Threaded Left Hand

What is this part?

Anthony 15-10064-0001 is a threaded standard left-hand top bracket identified in Anthony door parts documentation for 6001, 7000, and 8001 AOM door models.

What does it do?

The top bracket supports the upper pivot area of the door. It works with the hinge pin, bushing, bottom bracket, and closing hardware to keep the door located correctly as it swings and returns to the closed position.

How does it work in the door system?

Display-case doors rely on aligned top and bottom pivot points. The threaded top bracket provides a fixed mounting point at the upper end of the assembly, so worn threads, bent bracket geometry, or incorrect hand orientation can affect how the door hangs.

Why is this component important?

A display door must close consistently to protect product temperature and reduce air leakage. The bracket is a small part, but it helps control the mechanical alignment that lets the gasket and closing system do their job.

What happens when it fails?

Damaged bracket hardware can justify inspecting the door when it sags, rubs, does not close cleanly, or no longer holds alignment. The bracket should be diagnosed with the hinge pin, bushings, bottom bracket, torque/hold-open hardware, and fasteners.

How do I know this is the correct part?

• Match OEM number 15-10064-0001.
• Confirm the left-hand standard threaded top-bracket orientation.
• Verify the Anthony door model family before ordering.

Which equipment commonly uses it?

Anthony documentation places 15-10064-0001 in the section for 6001, 7000, and 8001 AOM door model parts.

What should I check before ordering?

Check door model, hand/orientation, standard versus reversed bracket configuration, thread condition, and related hinge hardware. If the old bracket failed because the door was dragging or over-stressed, inspect the rest of the pivot assembly before replacing only this part.

Frequently Asked Questions

What is Anthony 15-10064-0001?

It is a threaded standard left-hand top bracket for specified Anthony AOM door assemblies.

Why does left-hand orientation matter on this bracket?

The bracket geometry follows the door hand. A right-hand or reversed bracket can put the pivot point in the wrong position and keep the door from aligning.

What should be inspected with Anthony 15-10064-0001?

Inspect the hinge pin, bushing, retainer, bottom bracket, closing hardware, and mounting fasteners when bracket wear or damage is suspected.

Which model families are documented?

The Anthony parts book lists this part in the 6001, 7000, and 8001 AOM door model section.

Why verify the OEM before ordering?

Anthony door hardware has standard, reversed, left-hand, right-hand, threaded, and flat bracket variations. The OEM number is the safest way to separate them.