American Panel 9A-1060 Door Gasket 44-1/2 x 84-1/2

American Panel 9A-1060 Door Gasket 44-1/2 x 84-1/2

American Panel 9A-1060 identifies a three-sided replacement door gasket measuring 44-1/2 by 84-1/2 inches at the outside dimensions. Its size and mounting profile must match the existing door seal.

Order by the complete part reference 9A-1060 and verify the original assembly before selecting a replacement.

Specifications

Weight is a catalog shipping reference; actual packed weight can vary.

Fitment and ordering details

Confirm reference 9A-1060 in the equipment or door assembly parts list using the complete American Panel model and serial number. A matching brand name or similar appearance does not establish compatibility.

Compare the outside dimensions of 44-1/2 by 84-1/2 inches, three-sided configuration and gasket profile. Inspect the retainer and door alignment before ordering; a larger gasket should not be assumed to fit a smaller opening.

Service symptoms and checks

Torn corners, hardened seal sections, visible gaps or condensation along the door perimeter can indicate a seal problem. Inspect the gasket retainer, hinges and latch alignment as well. Replacing a gasket will not correct a sagging door or a damaged mounting channel.

Frequently asked questions

What size is American Panel 9A-1060?

The listed outside dimensions are 44-1/2 x 84-1/2 inches. The seal is 3-sided.

How should I check the gasket before ordering?

Compare the outside dimensions of 44-1/2 by 84-1/2 inches, three-sided configuration and gasket profile. Inspect the retainer and door alignment before ordering; a larger gasket should not be assumed to fit a smaller opening.

Which American Panel doors does it fit?

Confirm reference 9A-1060 in the equipment or door assembly parts list using the complete American Panel model and serial number. A matching brand name or similar appearance does not establish compatibility.

Is this a complete door assembly?

This listing identifies the replacement gasket. Door panels, hinges, latches and mounting retainers must be checked separately for the repair.

What should be inspected during replacement?

Inspect the mounting channel, clean the sealing surface and check door alignment using the equipment service instructions. After installation, confirm even contact around the sealed perimeter without twisting or stretching the gasket.

How can I get help matching 9A-1060?

Call PartsDirectOnline at 631-873-0509 with reference 9A-1060, the door model and serial number, gasket measurements and a clear description of the mounting profile.

Browse American Panel replacement parts and commercial refrigeration parts.