TAFCO Walk-In Cooler Door Latch — Flush & Offset Models

OEM Part Details

• OEM Number: K58 FL
• OEM Status: VERIFIED
• MPN: K58 FL
• SKU: PD-780-065
• Part Type: Latch

Product Overview

OEM Part Details OEM Part Number: K58 FL MPN: K58 FL SKU: PD-780-065 Part Type: Latch OEM Status: VERIFIED Product Overview The K58 FL latch is a door-hardware component for a walk-in cooler door with flush and offset door configurations. Its job is straightforward but important: it provides the mechanical closing point that helps keep the door securely shut during normal commercial refrigeration use. A latch that closes consistently supports proper door operation and helps the door gasket remain seated against the cabinet opening. Door hardware receives repeated use in busy foodservice settings. Over time, a latch can become worn, loose, damaged, difficult to operate, or misaligned with the mating door hardware. Those conditions can make the door harder to close or prevent it from staying fully latched. Replacing a worn latch with the correctly identified K58 FL component helps service personnel restore dependable door closure while avoiding the guesswork that comes with visually similar hardware. This listing identifies OEM part number K58 FL. Before ordering, compare the removed latch with the product image, mounting arrangement, door configuration, and equipment identification details. Careful comparison is especially important for door hardware because differences in mounting position, latch orientation, and door style can affect installation.

Product Function

Product Function This latch provides a mechanical means of securing a walk-in cooler door in its closed position. When the door closes, the latch engages with its corresponding door hardware to hold the assembly shut. Reliable engagement is important because the door gasket depends on a properly closed door to make consistent contact around the opening. Although a latch is a simple mechanical component, it works alongside the hinges, door closer, strike area, and gasket. Wear or damage in any of those areas can affect how the door closes. The K58 FL latch should be selected by its verified OEM number and by comparison with the original component and door arrangement.

Why Choose a Genuine OEM Replacement?

Why Choose a Genuine OEM Replacement? The verified OEM part number K58 FL gives technicians and buyers a reliable identification point when replacing this latch. Using the correct OEM-numbered component helps reduce the risk of ordering door hardware with the wrong mounting arrangement, orientation, or closing relationship. Match K58 FL to the removed part and review the door configuration before purchase.

How This Part Works

How This Part Works As the walk-in cooler door moves into the closed position, the latch and mating hardware work together to retain the door. The latch supplies the holding action that keeps the door from opening under normal use. This mechanical relationship allows the door gasket to remain compressed against the cabinet opening when the door is fully closed. Proper operation depends on more than the latch alone. The door must be positioned correctly on its hinges, the latch must align with the opposing hardware, and the gasket must be in serviceable condition. If the door is sagging, the hardware is loose, or the gasket is worn, a new latch may not correct the complete door-closing concern. Inspect the surrounding door assembly during service so the replacement latch can operate as intended.

Technician Service Tip

Technician Service Tip Before removing the existing latch, note its mounting position and orientation on the door. Compare the mounting points, latch location, and door configuration with the replacement component. Inspect the hinge hardware, gasket contact area, and mating latch hardware at the same time, since wear in those areas can affect door closure.

Common Failure Symptoms

• The door may require extra effort before the latch engages.
• The latch can feel loose, worn, or inconsistent during normal operation.
• The door may not remain fully closed after it is pushed shut.
• Visible damage, cracking, corrosion, or deformation on the latch should be inspected.
• A latch that does not line up with the mating hardware can indicate door or hardware alignment concerns.
• Repeated difficulty opening or closing the door may indicate wear in the latch assembly.
• Loose mounting hardware around the latch can affect its ability to hold the door closed.
• A door that rebounds after closing may indicate that the latch, gasket, hinges, or related door hardware needs inspection.

Commercial Applications

Commercial Applications This K58 FL latch is identified for walk-in cooler door use in commercial refrigeration environments. Walk-in cooler doors are commonly found in restaurant kitchens, foodservice facilities, institutional kitchens, grocery preparation areas, and commercial refrigeration service operations. In these settings, door hardware is used frequently and should be kept in good operating condition to support dependable access and door closure. Application must be confirmed before purchase. The verified part number, original latch arrangement, door style, and equipment identification details should all be reviewed. Do not rely on appearance alone when selecting replacement door hardware, since similar latches can differ in their mounting and closing arrangement.

Before You Order

• Match OEM part number K58 FL to the removed component or approved equipment documentation.
• Compare the replacement latch with the original part before placing the order.
• Confirm whether the door uses the flush or offset configuration shown in the product identification.
• Review the latch mounting location and mounting-hole arrangement on the door.
• Check the latch orientation and its relationship to the mating door hardware.
• Confirm the equipment data plate information, including the equipment model and serial number.
• Inspect the door hinges for looseness, wear, or sagging that could affect latch alignment.
• Review the door gasket and closing surface for conditions that could prevent proper door closure.

Related Components

• Door gasket: Inspect the gasket for wear, damage, or poor contact that may affect sealing when the door is latched.
• Hinge screws or hinge pins: Check hinge hardware for looseness or wear that can change the door position and latch alignment.
• Mating door latch hardware: Inspect the corresponding latch engagement point for damage, wear, or alignment concerns.
• Door closer: Review the closer for operation and door-closing consistency, since it can influence how the latch engages.

Frequently Asked Questions

What is OEM part number K58 FL?

K58 FL is the verified OEM part number for this walk-in cooler door latch.

What does a walk-in cooler door latch do?

A door latch mechanically holds the walk-in cooler door in its closed position and works with the door hardware and gasket to support proper closure.

Is K58 FL used with flush and offset door configurations?

The product identification lists K58 FL for flush and offset door configurations. Compare the removed latch and door arrangement before ordering.

Should I replace the latch if the door does not close correctly?

The latch should be inspected, but hinge condition, mounting hardware, the mating latch hardware, and the door gasket can also affect how the door closes.

How can I confirm this is the correct latch?

Match OEM part number K58 FL, compare the original component, review the mounting arrangement and orientation, and confirm the equipment model and serial number.

Can a worn latch affect walk-in cooler door operation?

Yes. A worn, loose, damaged, or misaligned latch can make the door difficult to close or may prevent consistent latch engagement.