Anthony 60-10847-0004 Black Electrical Hinge Pin with 3 Leads – 40 Inch

Anthony 60-10847-0004 Electrical Hinge Pin with Leads

The Anthony 60-10847-0004 is a black electrical hinge pin with three electrical leads for compatible commercial refrigeration door assemblies. The listed lead length is 40 inches, providing the wiring connection between the hinge-pin assembly and the door's electrical circuit.

On applicable Anthony doors, the hinge-pin leads connect to separate door-heater or heated-glass wiring. This assembly serves as an electrical connection at the door hinge; the heating element is a separate component.

Product Specifications

Manufacturer-Listed Door Models

Anthony's parts catalog lists the black hinge pin with leads, 60-10847-0004, in the following door-model sections:

Fitment requirement: These are catalog-listed door families. Confirm the exact door generation, installed hinge-pin configuration, connector arrangement, and Anthony work-order number before ordering. The Section C catalog identifies this hinge-pin style as beginning in 1987.

The Anthony work-order number, often marked W/O, is located on the identification label at the top of the door. Identify the Anthony door assembly as well as the refrigeration cabinet when requesting fitment assistance.

Function in the Door Heating Circuit

The electrical hinge pin forms part of the connection supplying applicable door-heating components. Damaged leads, worn contacts, or a poor connection at the mating receptacle can interrupt that circuit.

If the door glass or perimeter develops condensation, inspect the complete system before replacing parts. Gasket condition, door alignment, heater operation, wiring, controls, and operating conditions can also affect condensation.

When to Inspect or Replace This Assembly

• Cracked or damaged hinge-pin housing.
• Cut, pinched, frayed, or heat-damaged electrical leads.
• Discolored or damaged electrical contacts.
• An open or intermittent connection confirmed during electrical diagnosis.
• A damaged connection between the hinge pin and its mating receptacle.

Inspect the receptacle and connected wiring at the same time. Installing a replacement hinge pin into a damaged receptacle can leave the original electrical problem unresolved.

Before You Order

• Match the complete part number: Verify 60-10847-0004, including the final suffix.
• Confirm the door identification: Record the Anthony model, work-order number, and available serial information.
• Compare the assembly: Check the housing, pin shape, mounting arrangement, and mating receptacle.
• Check the leads: Confirm the required lead count, length, connector style, and routing.
• Inspect the circuit: Have the fault diagnosed before ordering a replacement for a condensation or heater complaint.

Installation and Service Notes

Installation should be performed by a qualified commercial refrigeration service technician. Disconnect electrical power and verify that the affected circuits are de-energized before handling the hinge pin, receptacle, or door wiring.

Follow the wiring diagram and service procedure for the exact Anthony door assembly. Preserve grounding connections, route the leads clear of moving hardware and sharp edges, and support the door as required during service.

After installation, verify the electrical connection, door movement, and operation of the connected heating circuit before returning the equipment to service.

Frequently Asked Questions

What is Anthony 60-10847-0004?

It is a black electrical hinge pin with leads used in compatible Anthony commercial refrigeration door assemblies. Its electrical leads connect to the applicable door wiring.

Is this the door-heater element?

No. It provides an electrical connection for the door circuit. The door-heater wire or heated-glass component is separate and should be tested independently when diagnosing a heating problem.

How many leads does this hinge pin have?

The listed configuration has three electrical leads with a listed length of 40 inches. Compare the connectors and routing requirements with the original assembly before ordering.

Is part 60-10847-0004 black or silver?

Anthony identifies 60-10847-0004 as the black version. Match the complete manufacturer number and installed hardware configuration when selecting a replacement.

Will this fit every door in the listed model families?

Fitment must be confirmed for the individual door. Use the Anthony work-order number, door generation, original part reference, and connector arrangement to verify the correct assembly.

Will replacing the hinge pin stop condensation on the door?

It may restore the heating circuit when a faulty hinge-pin connection is the confirmed cause. Condensation can also result from gasket leakage, heater failure, controls, door alignment, or environmental conditions.

What information should I provide for fitment help?

Provide the 60-10847-0004 part reference, Anthony door model, work-order number, available serial information, and clear photos of the hinge pin, leads, connectors, and mating receptacle.

Related Parts and Fitment Help

Visit our Anthony refrigeration door parts guide or browse commercial refrigeration heater elements when diagnosing the complete door-heating circuit.

Need help matching Anthony 60-10847-0004? Call PartsDirectOnline at 631-873-0509 before ordering.