Hoshizaki Commercial Refrigeration Door Gasket – 1-1/16" Profile

Hoshizaki Commercial Refrigeration Door Gasket – 1-1/16" Profile

This Hoshizaki commercial refrigeration door gasket is designed as a replacement door-sealing component for compatible Hoshizaki refrigerated equipment. The gasket profile shown measures approximately 1-1/16" x 1-1/16".

A properly fitted refrigeration door gasket helps maintain consistent contact between the door and cabinet when the door is closed. Replacing a torn, hardened, distorted, or poorly sealing gasket can help reduce unwanted warm-air infiltration, moisture around the door opening, frost accumulation, and unnecessary refrigeration-system run time.

No verified Hoshizaki OEM part number is currently assigned to this listing. Fitment should therefore be confirmed using the equipment model, serial number, gasket dimensions, profile, mounting style, and the original gasket before ordering.

Product Details

• Brand Application: Hoshizaki
• Part Type: Door Gasket
• Profile Size: Approximately 1-1/16" x 1-1/16"
• Application: Commercial Refrigeration Equipment
• Function: Refrigerator or freezer door sealing
• Mounting Style: Push-in gasket profile / retainer-style installation
• OEM Part Number: Not verified

What a Hoshizaki Door Gasket Does

The door gasket forms a flexible seal between the refrigeration cabinet and the closed door. When the door closes, the gasket compresses against the cabinet-facing surface to help limit air movement into and out of the refrigerated compartment.

An effective seal helps the refrigeration system maintain the required cabinet temperature while reducing unnecessary moisture infiltration and frost formation around the door opening.

Gasket Profile and Mounting

The gasket shown on this listing has an approximate profile measurement of 1-1/16" wide by 1-1/16" high. Profile dimensions are only one part of gasket identification.

Hoshizaki commercial refrigeration door gaskets typically use a push-in mounting arrangement where the retaining portion of the gasket seats into the door's gasket-retainer groove. The mounting profile must match the original gasket and retainer correctly for the gasket to remain secure and seal evenly.

Common Signs a Door Gasket May Need Replacement

• Torn, cracked, or split gasket material
• Flattened or permanently compressed sections
• Gasket pulls away from the door retainer
• Visible gaps between the gasket and cabinet
• Door requires excessive force to obtain a seal
• Moisture forming around the door opening
• Frost or ice developing near the door perimeter
• Cabinet struggles to maintain temperature despite otherwise normal operation

These symptoms do not automatically mean the gasket is the only problem. Door alignment, hinges, latches, retainers, and cabinet condition can also affect how evenly a gasket seals.

Technician Service Tip

Before replacing the gasket, inspect the complete door perimeter and compare the original gasket profile rather than checking only one section. Also inspect the door hinges, latch, gasket retainer, and door alignment.

During installation, seat the gasket securely into the retaining groove and avoid stretching the gasket material. Install the corners first and then work toward the center of each side so the gasket can remain evenly positioned around the door.

Before You Order

This listing does not currently have a verified Hoshizaki OEM part number. Do not order based on brand name or appearance alone.

Before ordering, compare the following with your existing gasket:

• Hoshizaki equipment model number
• Equipment serial number
• Overall gasket width and height
• 1-1/16" x 1-1/16" gasket profile
• Mounting / retaining profile
• Door orientation and configuration
• Corner construction
• Original gasket shape

If fitment is uncertain, provide the Hoshizaki model number, serial number, overall gasket measurements, and clear photos of the original gasket profile before ordering.

Frequently Asked Questions

Does this Hoshizaki door gasket have an OEM part number?
No verified Hoshizaki OEM part number is currently assigned to this listing. Fitment should be confirmed using the equipment model, serial number, measurements, profile, and mounting configuration.

What size is the gasket profile?
The profile shown measures approximately 1-1/16" x 1-1/16". These measurements refer to the gasket cross-section, not the overall gasket dimensions.

Can I order this gasket using the profile measurement alone?
No. Similar gasket profiles can be used on different door sizes and equipment applications. The overall gasket dimensions, mounting profile, equipment model, and serial number should also be checked.

How does this type of gasket install?
This style uses a retaining profile that presses into the gasket-retainer groove around the door. The retaining portion must seat securely and evenly in the groove.

Why is my Hoshizaki door gasket not sealing evenly?
Possible causes include a worn or distorted gasket, damaged retainer, sagging door, worn hinges, latch misalignment, or incorrect gasket fitment.

Can a damaged door gasket cause frost or moisture?
A gasket that does not seal consistently can allow warm, humid air into the refrigerated cabinet, which can contribute to condensation or frost around the door area.

Should I stretch the gasket during installation?
No. Stretching the gasket during installation can prevent it from fitting and sealing correctly. Seat the corners first and then work toward the center of each side.

How do I confirm this gasket fits my Hoshizaki equipment?
Compare the equipment model and serial number, overall gasket dimensions, 1-1/16" x 1-1/16" profile, mounting style, corner design, and original gasket before ordering.

Ordering Hoshizaki Refrigeration Door Gaskets

PartsDirectOnline supplies commercial refrigeration door gaskets and replacement parts for service technicians, restaurants, commercial kitchens, maintenance departments, and foodservice facilities. Providing the equipment model, serial number, gasket measurements, and profile photos can help identify the correct replacement when an OEM part number is unavailable.