Traulsen SER-16473-00 Gasket

Product Identification

• Manufacturer: Traulsen
• OEM Number: SER-16473-00
• MPN: SER-16473-00
• SKU: SER-16473-00
• Part Type: Door Gasket

Product Overview

Traulsen SER-16473-00 is an OEM door gasket used in commercial refrigeration door-sealing service. A properly seated gasket helps the door close against the cabinet opening and limits the loss of cooled cabinet air around the door perimeter. That seal matters in busy foodservice environments, where frequent door openings, worn door hardware, and repeated cleaning can gradually affect gasket compression and door closure. As a wear-related door component, a gasket should be compared carefully with the original part before purchase. The manufacturer part number, gasket profile, mounting arrangement, overall shape, and door-side details all matter when identifying the correct replacement. A gasket that looks similar may not seat correctly in the door channel or seal evenly against the cabinet. Replacing a damaged or compressed gasket can help restore a more consistent door seal when the original component is visibly worn or no longer closing evenly. This Traulsen OEM part is identified by manufacturer number SER-16473-00. Verify the equipment model, serial number, and original component details before ordering, especially where cabinet doors have been serviced previously or door alignment is in question.

Product Function

This door gasket forms the sealing surface between the Traulsen cabinet door and cabinet opening. When the door closes, the gasket compresses around the perimeter to help limit cabinet air leakage. Its condition can affect how evenly the door closes and whether gaps are visible along the door edge. The gasket works alongside the door assembly rather than independently. Door alignment, hinge condition, latch engagement, and the condition of the mounting channel can all influence seal contact. If the original gasket is torn, hardened, distorted, loose in its channel, or permanently compressed, it should be inspected along with the surrounding door hardware. Match SER-16473-00 to the original part and verify physical details before placing an order.

Why Choose a Genuine OEM Replacement?

A Traulsen OEM replacement provides a clear manufacturer part-number reference for identifying the intended gasket: SER-16473-00. Using the original number as the starting point helps reduce wrong-order risk when several door gaskets may appear alike. Compare the removed gasket, its profile, mounting arrangement, and door-side shape with the replacement information, then confirm the equipment model and serial number before ordering.

How This Part Works

A door gasket operates by creating continuous contact between the door and the cabinet opening when the door is shut. As the door closes, the gasket compresses against the mating surface. Even contact around the top, bottom, hinge side, and latch side is important because a gap in any area may allow cabinet air to escape or outside air to enter. The gasket's performance depends on more than the gasket alone. A door that sags, a latch that does not pull the door into position, or a damaged gasket retainer can prevent uniform compression. Dirt, damage, distortion, or loss of resilience in the original gasket may also affect the seal. During cabinet service, inspect the door edge and mounting channel for conditions that could keep the new gasket from seating correctly. This part should be selected by verified OEM number and a direct comparison with the original component rather than appearance alone.

Technician Service Tip

Before replacing the gasket, inspect the door perimeter, mounting channel, hinges, latch area, and door alignment. Compare the original gasket profile and attachment arrangement with SER-16473-00 before installation. If the door does not close squarely, correct the related door-hardware condition before expecting a replacement gasket to seal evenly.

Common Failure Symptoms

• Visible tears, splits, or missing sections of the door gasket may indicate replacement is needed.
• A gasket that feels hardened, flattened, or permanently compressed should be inspected.
• Uneven contact between the door gasket and cabinet opening can indicate a sealing concern.
• Moisture forming near the door perimeter may indicate outside air is entering through an incomplete seal.
• Frost or ice near a refrigerated door opening may indicate a gasket, door-alignment, or closure issue.
• A door that requires extra pressure to remain closed should be inspected for gasket and hardware condition.
• Sections of gasket pulling away from the mounting channel can indicate wear or retainer concerns.
• Visible gaps along the hinge side, latch side, top, or bottom of a closed door may indicate poor compression.
• Cabinet temperature concerns near a frequently opened door may indicate the door seal and related components should be evaluated.
• A door that does not sit evenly against the cabinet may indicate hinge, latch, or door-alignment wear in addition to gasket condition.

Commercial Applications

This Traulsen door gasket is intended for commercial refrigeration door-sealing service where the OEM number SER-16473-00 is confirmed. Commercial refrigeration equipment is commonly maintained in restaurant kitchens, institutional foodservice operations, commercial cold-storage areas, and service environments where cabinet doors are opened repeatedly throughout the day. Because exact equipment fitment was not supplied, do not assume use on a particular reach-in refrigerator, freezer, prep unit, or other cabinet configuration. Confirm the equipment model and serial number, then compare the original gasket's profile, shape, and attachment details. Proper identification is especially important for doors that have undergone prior hardware or door-assembly service.

Before You Order

• Match the manufacturer part number SER-16473-00 to the original component or approved equipment documentation.
• Verify the Traulsen equipment model and serial number before ordering.
• Compare the original gasket's overall shape and corner configuration with the replacement.
• Confirm the gasket profile and mounting arrangement match the door channel.
• Inspect whether the original gasket is retained in a track or other door-side mounting arrangement.
• Review product images against the removed part when available.
• Check the door perimeter for bent areas, damage, or debris that could affect gasket seating.
• Inspect door hinges and latch condition because poor alignment can prevent even gasket compression.
• Confirm the door closes squarely against the cabinet before attributing all sealing concerns to the gasket.
• Do not rely on appearance alone; similar gaskets can differ in profile and attachment details.

Related Components

• Door hinges: Inspect for wear or misalignment that may keep the door from closing evenly against the gasket.
• Door latch: Check latch engagement because insufficient closing pull can leave gaps around the door perimeter.
• Door closer: Evaluate the closer, where fitted, to confirm it brings the door fully into the closed position.
• Gasket retainer or mounting track: Inspect the gasket channel for damage, contamination, or areas that may not hold the gasket securely.

Frequently Asked Questions

What is Traulsen SER-16473-00?

Traulsen SER-16473-00 is an OEM door gasket identified for commercial refrigeration door-sealing service. Verify the equipment model, serial number, and original gasket details before ordering.

What does a commercial refrigeration door gasket do?

A door gasket compresses between the cabinet door and opening to help limit cabinet air leakage when the door is closed. Proper sealing also depends on door alignment, hinge condition, latch engagement, and the gasket mounting area.

How can I confirm SER-16473-00 is the correct gasket?

Match SER-16473-00 to the original manufacturer part number or approved equipment documentation. Also compare the original gasket profile, shape, corner layout, and mounting arrangement, and verify the equipment model and serial number.

Can a door gasket cause frost or moisture near the door?

Frost, moisture, or a visible gap around the door may indicate that the gasket, door alignment, latch, hinges, or mounting channel should be inspected. These conditions do not identify one failed component by themselves.

Should door hinges and latches be inspected when replacing a gasket?

Yes. Hinges, latches, and related door hardware can affect whether the door closes squarely and whether the gasket compresses evenly around the cabinet opening.

Does this gasket fit every Traulsen cabinet?

No. Model-specific fitment was not provided. Confirm the manufacturer part number, equipment model, serial number, and original gasket details before purchase.

Related Parts and Fitment Help

Browse Traulsen parts or contact PartsDirectOnline for a part match. Include the equipment model, serial number and original part markings.