Traulsen Magnetic Gasket — Push-In Style | Cooler & Freezer Door | 3 or 4-Sided

Verified Product Identification

• Manufacturer: Traulsen
• OEM Number: 341-38232-00
• MPN: 341-38232-00
• SKU: PD-120-254
• Part Type: Door Gasket

Product Overview

The Traulsen 341-38232-00 door gasket is a magnetic, push-in style door seal used on commercial refrigeration equipment. Its job is to help the door close against the cabinet opening and maintain a consistent seal around the door perimeter. A properly seated gasket helps limit cabinet air leakage, supports stable cabinet conditions, and helps the refrigeration system avoid unnecessary run time caused by a door that is not sealing correctly. Door gaskets are wear items in busy commercial kitchens, cold-storage areas, and foodservice operations. Repeated door openings, heavy use, cleaning chemicals, impact damage, and long-term compression can leave a gasket torn, hardened, misshapen, or unable to make even contact with the cabinet face. When that happens, the door may not close as securely as it should, and moisture or frost may develop around the opening. This Traulsen OEM part should be matched carefully to the original component before ordering. Confirm the manufacturer part number, compare the push-in mounting profile, review the door-side configuration, and verify equipment model and serial information. Careful identification helps prevent an incorrect gasket order and supports dependable cabinet door service.

Product Function

This door gasket creates a sealing surface between a Traulsen refrigeration cabinet door and the cabinet opening. The magnetic section helps hold the door against the cabinet face while the gasket body provides compression around the perimeter. When the profile is seated correctly and the door is aligned, the gasket helps limit warm-air entry and cold-air loss at the door opening. A damaged or compressed gasket can affect door closure and may allow air leakage around sections of the cabinet. The gasket should be evaluated along with door alignment, hinges, latch condition, and the gasket channel so that the replacement part can make even contact after installation.

Why Choose a Genuine OEM Replacement?

A genuine Traulsen OEM replacement helps keep the manufacturer part number consistent with the original component being replaced. Matching OEM number 341-38232-00 is an important first step when identifying a door gasket, especially where mounting style, perimeter shape, and door configuration must match the existing part. Compare the original gasket profile and door details before ordering to help avoid a wrong part selection.

How This Part Works

A magnetic door gasket works by combining a flexible sealing profile with a magnetic section that draws the door toward the cabinet face as it closes. The push-in portion of the gasket is installed into the appropriate door channel or retainer area. Once seated, the gasket perimeter is intended to contact the cabinet evenly when the door is shut. For the seal to work as intended, the gasket must match the original profile and sit fully in its mounting area. Door hinges, latches, closers, and the condition of the cabinet contact surface can also affect how well the gasket compresses. A new gasket alone may not correct a poor seal if the door is sagging, the channel is damaged, or the latch does not pull the door into its normal closed position. Inspecting these related areas helps identify conditions that can prevent even gasket contact.

Technician Service Tip

Before replacing the gasket, compare the original mounting profile and inspect the full door channel for debris, damage, or sections where the old gasket has pulled away. Also check door alignment and latch operation, since an uneven door can prevent a correctly identified gasket from making consistent contact.

Common Failure Symptoms

• A torn, split, or visibly damaged gasket may indicate that replacement is needed.
• A door that does not remain closed securely should be inspected for gasket compression and door hardware condition.
• Moisture around the door opening can indicate a possible sealing issue.
• Frost developing near the door perimeter may indicate cabinet air leakage.
• Flattened or hardened gasket sections can indicate loss of sealing compression.
• Gaps between the door gasket and cabinet face should be inspected for profile, seating, or alignment concerns.
• A gasket that pulls out of its channel may indicate a damaged mounting area or an incorrect profile.
• Uneven contact around one side of the door can indicate hinge, latch, closer, or door alignment concerns.
• Visible dirt buildup along the gasket contact area should be evaluated because it can interfere with a consistent seal.
• Cabinet conditions that are difficult to maintain may indicate that the door seal and related door components should be inspected.

Commercial Applications

This Traulsen door gasket is intended for commercial refrigeration door service where OEM number 341-38232-00 matches the original component. Door gasket replacement is common in restaurant kitchens, institutional foodservice operations, commercial cold-storage areas, and refrigeration service work where cabinet doors receive frequent use. Confirm the equipment model and serial number before ordering because door configuration and gasket profile must match the original part. The product should be selected by OEM identification and physical comparison rather than by equipment category alone.

Before You Order

• Match Traulsen OEM number 341-38232-00 to the original part number.
• Verify the equipment model and serial number before selecting a replacement.
• Compare the original gasket mounting profile with the replacement profile.
• Confirm that the gasket uses the required push-in mounting style for the door.
• Review the original gasket configuration and perimeter shape before ordering.
• Compare the original component image with the product image when available.
• Inspect the door channel or retainer area for damage, debris, or distortion.
• Check door hinge, latch, and closer condition because alignment affects gasket contact.
• Confirm that the existing door closes squarely against the cabinet opening.
• Do not rely on appearance alone when the original part number or door details are available.

Related Components

• Door hinges should be inspected because hinge wear or loose mounting can allow the door to sag and create uneven gasket contact.
• Door latches should be checked because a latch that does not pull the door closed can leave gaps at the gasket sealing surface.
• Door closers should be evaluated where used because weak or damaged closing hardware can prevent complete door closure.
• The gasket retainer or door channel should be inspected for damage or debris that could keep the push-in gasket from seating fully.
• The cabinet contact surface should be cleaned and checked for damage because uneven contact can affect the gasket seal.

Frequently Asked Questions

What is Traulsen part number 341-38232-00?

Traulsen part number 341-38232-00 is a magnetic, push-in style door gasket for commercial refrigeration door service. Match the OEM number and compare the original gasket profile before ordering.

How do I confirm that this door gasket is the correct part?

Confirm the Traulsen OEM number, equipment model, serial number, original gasket profile, mounting style, and door configuration. A visual comparison with the original component is also recommended.

What does a magnetic door gasket do?

A magnetic door gasket helps hold the door against the cabinet opening and creates a compression seal around the door perimeter. This helps limit air leakage at the cabinet door.

Should door hinges and latches be inspected when replacing a gasket?

Yes. Door hinges, latches, closers, and the gasket channel should be inspected because poor door alignment or incomplete closure can prevent the gasket from making even contact.

Can a damaged door gasket affect cabinet operation?

A torn, hardened, flattened, or poorly seated gasket can allow air leakage around the door opening. The gasket and related door hardware should be evaluated when a sealing concern is present.

Does this gasket fit every Traulsen refrigeration cabinet?

No. Fitment must be confirmed against the equipment model, serial number, original part number, and original gasket profile before ordering.