Everest DG29-00 Genuine OEM Drawer Gasket 28-3/8" x 11-1/2"

Everest DG29-00 Genuine OEM Drawer Gasket – 28-3/8" x 11-1/2"

The Everest DG29-00 is a Genuine OEM drawer gasket designed for compatible Everest commercial refrigeration equipment. This black refrigeration gasket measures approximately 28-3/8" x 11-1/2" and provides the sealing surface between the refrigerated drawer and cabinet opening.

A properly fitted drawer gasket helps reduce unwanted warm-air and moisture infiltration when the drawer is closed. Maintaining an even seal supports stable refrigerated cabinet conditions and helps the refrigeration system operate as intended.

Use Everest manufacturer part number DG29-00 as the primary identification reference when selecting this replacement. Always verify the equipment model, serial number, original gasket dimensions, mounting profile, and drawer configuration before ordering.

Product Details

• Manufacturer: Everest Refrigeration
• Manufacturer Part Number / MPN: DG29-00
• Part Type: Drawer Gasket
• Classification: Genuine OEM
• Color: Black
• Approximate Size: 28-3/8" x 11-1/2"
• Metric Reference: Approximately 720 mm x 294 mm
• Application: Commercial Refrigeration Drawers
• Function: Refrigerated drawer sealing

What the Everest DG29-00 Drawer Gasket Does

The DG29-00 creates a flexible sealing surface between the refrigerated drawer and the cabinet. When the drawer closes, the gasket compresses against the cabinet-facing surface to help close gaps around the drawer opening.

Consistent gasket contact helps limit the movement of warmer, moisture-laden air into the refrigerated compartment. This is especially important on commercial refrigeration equipment where drawers may be opened frequently throughout the day.

28-3/8" x 11-1/2" Drawer Gasket

Everest DG29-00 is cataloged as a drawer gasket measuring approximately 28-3/8 inches by 11-1/2 inches.

Use these measurements together with the manufacturer part number when confirming the correct replacement. Do not substitute another gasket solely because its overall dimensions appear similar, since the profile and mounting configuration can differ.

Why Drawer Gasket Condition Matters

Commercial refrigeration drawer gaskets are repeatedly compressed every time the drawer is closed. Over time, the gasket can flatten, tear, harden, distort, or lose consistent contact around the opening.

A worn gasket can allow unwanted air and moisture into the cabinet and may contribute to longer refrigeration-system run times, condensation, frost, or inconsistent temperatures near the drawer opening.

Common Signs the Drawer Gasket May Need Replacement

• Gasket is torn, cracked, split, or punctured
• Sections of the gasket are flattened or permanently compressed
• Drawer does not seal evenly when closed
• Visible gaps appear around the drawer perimeter
• Gasket pulls away from the mounting channel
• Moisture develops around the drawer opening
• Frost or condensation forms near the gasket area
• Drawer requires excessive force to obtain a seal
• Gasket corners are curled, distorted, or damaged

These symptoms do not automatically mean the gasket is the only problem. Drawer alignment, slides, mounting hardware, cabinet condition, and the gasket-retaining channel can also affect sealing.

Technician Service Information

Before replacing the Everest DG29-00, inspect the complete drawer assembly. Confirm that the drawer is properly aligned and that the slides, mounting hardware, and cabinet opening are in good condition.

Clean the gasket mounting area and remove dirt, grease, food residue, and deteriorated gasket material before installing the replacement.

Install the new gasket evenly without unnecessarily stretching or twisting it. After installation, close the drawer and inspect the complete perimeter for consistent contact with the cabinet.

Before You Order

Confirm Everest manufacturer part number DG29-00 before ordering.

Verify the following:

• Everest manufacturer part number DG29-00
• Approximately 28-3/8" x 11-1/2" dimensions
• Equipment model number
• Equipment serial number
• Original gasket profile
• Mounting / retaining configuration
• Drawer width and height
• Original gasket shape and corner construction

Do not select a replacement refrigeration gasket based only on appearance or dimensions. Similar-looking drawer gaskets can use different profiles and mounting configurations.

Frequently Asked Questions

What is Everest part number DG29-00?
Everest DG29-00 is a Genuine OEM black drawer gasket used in compatible Everest commercial refrigeration equipment.

What size is Everest DG29-00?
The gasket is approximately 28-3/8" x 11-1/2".

Is Everest DG29-00 a door gasket or drawer gasket?
DG29-00 is specifically cataloged as a drawer gasket.

Is Everest DG29-00 Genuine OEM?
Yes. Current OEM parts catalogs identify DG29-00 as a Genuine OEM Everest refrigeration gasket.

What color is Everest DG29-00?
The gasket is listed as black.

Can a worn drawer gasket cause condensation?
Yes. An uneven drawer seal can allow warmer, humid air into the refrigerated cabinet and contribute to condensation or moisture near the opening.

Why might a new drawer gasket still have a gap?
Possible causes include improper gasket seating, drawer misalignment, worn drawer slides, a damaged retaining channel, or an incorrect gasket profile.

How do I confirm DG29-00 is the correct replacement?
Match manufacturer part number DG29-00 whenever possible and verify the 28-3/8" x 11-1/2" size, equipment model, serial number, gasket profile, mounting style, and original drawer gasket before ordering.

Everest Commercial Refrigeration Drawer Gaskets

The Everest DG29-00 is designed for commercial refrigeration applications requiring the specified drawer-gasket configuration. Accurate manufacturer part-number, dimensional, profile, and equipment verification helps reduce incorrect orders and supports proper refrigerated drawer sealing.