Kason Spring Action Door Closer — Top Mounted | Self-Closing for Walk-In Cooler & Freezer Doors

OEM Part Details

• Manufacturer: Kason
• OEM Number: 11095000013
• OEM Status: VERIFIED
• MPN: 11095000013
• SKU: PD-780-704
• Part Type: Door Closer

Product Overview

The Kason 11095000013 spring action door closer is a top-mounted door hardware component for commercial walk-in cooler and freezer doors. Its closing action helps return the door toward the closed position after it has been opened, supporting proper gasket compression and more consistent door closure. A walk-in door that does not close correctly can allow cold air to escape, increase moisture around the opening, and place added demand on refrigeration equipment. Door closing hardware also affects day-to-day traffic through busy foodservice and storage areas, where doors may be opened repeatedly during receiving, prep, stocking, and service. This Kason OEM door closer is identified by manufacturer part number 11095000013 and should be compared carefully with the removed component before purchase. Review the mounting arrangement, door condition, hinge movement, latch operation, and gasket contact area so the replacement addresses the actual door-closing concern rather than a related alignment or sealing issue. A closer that is worn, loose, or damaged can contribute to inconsistent closing action, but it should be evaluated as one part of the complete door assembly. Careful part identification helps commercial service teams select hardware that supports dependable daily door operation.

Product Function

This spring action door closer provides mechanical closing assistance for an applicable commercial walk-in door. As the door moves away from its closed position, the closer’s spring action is intended to help guide the door back toward the frame. Proper closing action supports the door gasket’s ability to compress against the frame and maintain a sealed door opening. The closer works as part of the complete door assembly rather than as a standalone cure for every closure concern. Hinge wear, loose mounting hardware, latch condition, door alignment, and gasket damage can each affect how the door closes and seals.

Why Choose a Genuine OEM Replacement?

Using the Kason OEM part number 11095000013 helps identify the intended door closer when replacing the original component. Matching the manufacturer part number and comparing the removed hardware can reduce the risk of ordering a closer with a different mounting arrangement or closing configuration. OEM identification is especially useful on commercial walk-in doors, where door hardware must work together with the hinges, latch, frame, and gasket contact surface. Confirm the part number, mounting points, and overall appearance before ordering.

How This Part Works

A spring action door closer stores mechanical force as the door is opened and uses that force to assist the door’s return toward the closed position. When the closer, hinges, latch, and door alignment are in proper condition, the door can move into position for the gasket to contact the frame evenly. The closer does not create the seal by itself; the gasket and door alignment establish the seal, while the closing hardware helps bring the door into the necessary position. If the door stops short, binds, slams, or fails to engage the latch, the cause may involve the closer or another part of the door assembly. Inspect the complete door path, including mounting hardware, hinge movement, latch engagement, gasket compression, and frame condition, before replacing components.

Technician Service Tip

Before replacing the closer, compare the removed Kason component with OEM number 11095000013 and inspect the mounting points for looseness or damage. Check whether the door moves freely on its hinges and whether the gasket contacts the frame evenly when the door closes.

Common Failure Symptoms

• A door that may not return fully toward the closed position after opening.
• A walk-in door that can require extra effort to close or latch.
• Door movement that may feel weak, inconsistent, or uncontrolled during closing.
• A door that may stop short of the frame and leave incomplete gasket compression.
• Visible wear, damage, looseness, or corrosion around the closer or its mounting points.
• A door that may slam or close abruptly, which can indicate door hardware should be inspected.
• Moisture, frost, or air leakage near the door opening that can indicate poor closure or gasket contact.
• A latch that may not engage consistently because the door is not reaching its proper closed position.
• Uneven gasket contact around the frame, which can indicate an alignment, hinge, or closing-action concern.
• Recurring door-closure complaints after hinge, latch, or gasket wear has been observed.

Commercial Applications

This Kason door closer is associated with commercial walk-in cooler and freezer door service. It is relevant to restaurant kitchens, foodservice storage areas, institutional kitchens, grocery and beverage operations, and refrigeration service work where walk-in door closure affects cabinet conditions and daily access. Use is dependent on the original door hardware arrangement and confirmed manufacturer part number. The closer should be considered alongside the complete door assembly, including hinges, latch hardware, gasket condition, mounting surfaces, and frame alignment. Confirm the equipment data plate, serial number, original component, and mounting arrangement before ordering for a particular installation.

Before You Order

• Match Kason OEM part number 11095000013 to the original component or approved equipment documentation.
• Compare the removed door closer with the product image and product description.
• Confirm that the existing closer is top mounted.
• Inspect the mounting points and compare their location and arrangement with the original hardware.
• Check the door hinges for wear, looseness, binding, or alignment concerns.
• Inspect the latch and strike to confirm the door can engage when it reaches the frame.
• Examine the door gasket for tears, hardening, gaps, or uneven compression.
• Confirm the equipment data plate and serial number before selecting replacement door hardware.
• Review the door’s closing path for contact with the frame, floor, or adjacent hardware.
• Use a qualified commercial refrigeration service professional when door adjustment or hardware condition raises safety concerns.

Related Components

• Door hinges: Worn, loose, or misaligned hinges can prevent the door from reaching the position needed for proper closer operation.
• Door latch and strike: Inspect latch engagement because a door closer cannot compensate for a latch or strike that is damaged or out of alignment.
• Door gasket: Check the gasket for damage or poor compression, since the gasket establishes the seal once the door closes.
• Door closer mounting hardware: Inspect fasteners and mounting surfaces for looseness, wear, or damage that can affect closing action.
• Gasket retainer or track: Examine the gasket retention area if the gasket is loose or unable to sit evenly around the door perimeter.

Frequently Asked Questions

What is Kason part number 11095000013?

Kason 11095000013 is a spring action, top-mounted door closer identified for commercial walk-in cooler and freezer door hardware.

What does a spring action door closer do on a walk-in door?

It provides mechanical closing assistance to help guide the door back toward the closed position after opening. Proper closure supports gasket contact and latch engagement.

Will a new door closer fix a walk-in door that does not seal?

Not always. Poor sealing can also involve hinge alignment, latch operation, door position, frame condition, or a worn gasket. Inspect the complete door assembly before replacing parts.

How do I confirm this is the correct Kason door closer?

Match OEM number 11095000013 to the original component or approved equipment documentation, then compare the mounting arrangement and overall hardware configuration.

Should the hinges and latch be inspected when replacing a door closer?

Yes. Hinges, latch hardware, mounting points, and gasket condition all affect whether the door reaches the frame and closes correctly.

Why is proper walk-in door closure important?

A door that closes and seals properly helps limit cold-air loss, moisture around the opening, and unnecessary demand on commercial refrigeration equipment.