Turbo Air Door Switch — White Lever Type | OEM Replacement | Fits Most Models

OEM Part Details

• Manufacturer: Turbo Air
• OEM Number: P995200200
• OEM Status: VERIFIED
• MPN: P995200200
• SKU: PD-134-030
• Part Type: Hinge

Product Overview

The Turbo Air P995200200 hinge is an OEM-identified replacement component for commercial refrigeration equipment. A properly matched hinge supports the door assembly at its mounting points and helps the door move through its normal opening and closing travel. Door hardware matters because a cabinet door must remain positioned correctly for the rest of the assembly to operate as intended. Wear, damage, looseness, or a mismatch in hinge design can affect door alignment and place added strain on related door hardware. This Turbo Air OEM part is identified by manufacturer part number P995200200 and SKU PD-134-030. Those identifiers provide the strongest starting point when comparing the replacement with the original component removed from the equipment. Buyers should also review the hinge’s visible configuration, mounting arrangement, orientation, and connection points before ordering. Exact model fitment is not supplied here, so the equipment data plate and original component should be reviewed during part selection. Using a correctly identified hinge helps commercial refrigeration service teams address door-hardware repairs with greater confidence and reduce the risk of ordering a component that does not match the existing assembly.

Product Function

This hinge provides a mechanical support and pivot point for the door assembly on applicable Turbo Air commercial refrigeration equipment. Its role is to hold the door in the intended position while allowing controlled movement during normal use. Correct hinge condition can be important to door alignment, mounting stability, and the relationship between the door and surrounding cabinet hardware. Because hinge designs can vary by mounting pattern, orientation, door arrangement, and physical configuration, the replacement should be compared carefully with the original component. The verified Turbo Air manufacturer part number P995200200 is the primary identification reference for this item. A hinge replacement should be selected for the exact equipment application rather than by general appearance alone.

Why Choose a Genuine OEM Replacement?

Turbo Air OEM part number P995200200 provides a reliable identification point for this hinge. Matching the manufacturer part number, along with the original component and equipment information, helps service personnel select the intended replacement rather than relying only on a similar-looking hinge. OEM identification is especially useful when door hardware has similar mounting features but differs in orientation, attachment points, or overall configuration. Confirming the Turbo Air part number before purchase can help reduce wrong-order delays during commercial refrigeration service.

How This Part Works

A door hinge works as the support point between the door assembly and its cabinet-side mounting location. When the door is opened or closed, the hinge allows the assembly to pivot while helping maintain its installed relationship with the surrounding hardware. The hinge must correspond with the original mounting arrangement and orientation so the door assembly can be positioned as intended. In commercial refrigeration service, a hinge should be considered together with the condition of the door, mounting points, fasteners, and related hardware. A loose mounting location or damaged door hardware can produce concerns that are not corrected by replacing a hinge alone. Comparing the original component with Turbo Air P995200200 before installation helps confirm that the replacement has the appropriate identification and visible configuration for the equipment being serviced.

Technician Service Tip

Before replacing the hinge, compare the original component with the replacement for mounting location, orientation, attachment points, and visible configuration. Inspect the door assembly and hinge mounting areas for wear or damage that could affect alignment.

Common Failure Symptoms

• A door that appears uneven at the hinge side may indicate that the hinge and its mounting points should be inspected.
• Excessive movement at the door support area can indicate wear, looseness, or damage in the hinge assembly.
• A door that does not travel smoothly through its normal opening and closing range may indicate a hinge-related concern.
• Visible damage, corrosion, deformation, or cracking at the hinge may indicate that replacement is needed.
• Loose or missing hinge fasteners can indicate that the hinge mounting area requires inspection.
• A door that sits out of position relative to the cabinet opening may indicate a hinge, mounting, or related door-hardware issue.
• Unusual rubbing or contact near the door edge may indicate that hinge alignment and surrounding hardware should be checked.
• Recurring door alignment concerns after hardware adjustment can indicate that the hinge, door assembly, and mounting surfaces need evaluation.

Commercial Applications

This Turbo Air hinge is intended for commercial refrigeration equipment service where the verified manufacturer part number P995200200 matches the original component. It may be relevant to restaurant refrigeration service, foodservice maintenance work, commercial cold-storage support, and service organizations responsible for cabinet door hardware. Commercial operators depend on door assemblies that are properly supported and aligned, making careful hinge identification important during maintenance or repair. Exact equipment fitment is not provided, so the original hinge, equipment data plate, and installation arrangement should be compared before ordering. This approach helps technicians and facility teams select a replacement based on confirmed equipment information rather than appearance alone.

Before You Order

• Match Turbo Air OEM part number P995200200 to the original component and available equipment documentation.
• Compare the replacement hinge with the original part for overall configuration and visible features.
• Confirm the hinge orientation and mounting location on the door assembly.
• Review the mounting points and attachment arrangement before purchase.
• Inspect the original hinge for markings that support the part-number match.
• Check the equipment data plate for the equipment model and serial number during fitment review.
• Compare the door-side and cabinet-side attachment areas with the original installation.
• Inspect related door hardware and mounting surfaces to determine whether additional service is needed.

Related Components

• Door mounting fasteners should be inspected because loose, worn, or damaged fasteners can affect hinge stability and door positioning.
• Related door hinges should be inspected because wear or damage at another support point can contribute to alignment concerns.
• Door mounting points should be inspected because damaged or worn attachment areas may prevent a replacement hinge from sitting correctly.
• Related door hardware should be inspected because the hinge works as part of the complete door assembly and surrounding hardware can affect door movement.

Frequently Asked Questions

What is the Turbo Air P995200200 part?

Turbo Air P995200200 is an OEM-identified hinge for commercial refrigeration equipment. It supports the door assembly at its mounting location and allows normal door movement when correctly matched to the equipment.

Is P995200200 a genuine Turbo Air OEM part number?

Yes. P995200200 is the verified Turbo Air OEM part number associated with this hinge.

How should I confirm this hinge before ordering?

Match Turbo Air part number P995200200 to the original component and compare the hinge orientation, mounting points, attachment arrangement, and visible configuration. Review the equipment data plate during fitment confirmation.

What can cause a commercial refrigeration door to sit unevenly?

An uneven door may indicate a hinge concern, loose mounting hardware, worn mounting points, or another door-assembly issue. The hinge and related hardware should be inspected before determining the required repair.

Does this listing include verified equipment model fitment?

No specific equipment model fitment is provided. Confirm the application by comparing the original hinge, Turbo Air part number P995200200, and the equipment data plate before purchase.

Should related door hardware be inspected when replacing a hinge?

Yes. Inspect mounting fasteners, door mounting points, other hinges, and related door hardware because these components can affect door support and alignment.