True 939674 Right Hand / 939673 Left Hand OEM Drawer Slides

True 939674 Right Hand / 939673 Left Hand OEM Drawer Slides

The True 939674 Right-Hand Drawer Slide and True 939673 Left-Hand Drawer Slide are OEM drawer-support components designed for compatible True Manufacturing commercial refrigeration equipment. These slides support the refrigerated drawer assembly and provide the guided movement required for smooth opening and closing during normal foodservice operation.

Commercial refrigerated drawers are opened repeatedly throughout the day, placing continual load on the slide assemblies. Worn, bent, loose, damaged, or contaminated slides can cause a drawer to bind, sag, drag, become difficult to open, or fail to close squarely against the cabinet.

When inspection confirms drawer-slide wear or damage, using the correct True OEM 939674 right-hand and/or 939673 left-hand slide helps restore the drawer-support arrangement intended for compatible True equipment.

OEM Part Details

• Manufacturer: True Manufacturing
• Right-Hand OEM Part Number: 939674
• Left-Hand OEM Part Number: 939673
• Part Type: Refrigerated Drawer Slide / Drawer Guide
• Application: Commercial Refrigeration Equipment
• Function: Drawer Support, Alignment & Guided Movement

Right-Hand vs. Left-Hand Drawer Slide

This product references two side-specific True OEM components:

• True 939674: Right-Hand Drawer Slide
• True 939673: Left-Hand Drawer Slide

Right-hand and left-hand drawer hardware should not be assumed interchangeable. Verify which side of the drawer requires replacement and compare the original slide with the applicable OEM part number before ordering.

What These True Drawer Slides Do

The drawer slides provide the mechanical support and guided travel required for the applicable refrigerated drawer assembly. Properly functioning slides help keep the drawer aligned as it moves into and out of the cabinet.

Correct drawer-slide operation helps support:

• Smooth drawer opening and closing
• Proper drawer alignment
• Consistent support of the drawer assembly
• Reduced side-to-side movement
• Proper drawer-to-cabinet positioning
• Consistent gasket contact when the drawer is closed
• Reduced stress on surrounding drawer hardware
• Dependable commercial refrigeration operation

Compatible True Models

The True 939674 right-hand / 939673 left-hand drawer slides are listed for compatible True commercial refrigeration equipment including:

• TPP119D2
• TPP119D4
• TPP60D2
• TPP67D4
• TPP93D6
• TRCB110
• TRCB36
• TRCB48
• TRCB50
• TRCB52
• TRCB5260
• TRCB72
• TRCB79
• TRCB7986
• TRCB82
• TRCB8284
• TRCB8286
• TRCB96
• TUC6032D2

Compatibility Note: True equipment can vary by serial number, production date, drawer configuration, and factory revision. Always verify the complete equipment model and serial number along with 939674 for the right-hand slide or 939673 for the left-hand slide before ordering.

Common Signs of Worn Drawer Slides

Commercial refrigeration technicians and operators may inspect the drawer slides when experiencing conditions such as:

• Drawer is difficult to open
• Drawer is difficult to close
• Drawer binds during travel
• Drawer sags when extended
• Excessive side-to-side drawer movement
• Drawer does not sit squarely in the cabinet
• Drawer drags against surrounding components
• Slide is visibly bent or damaged
• Excessive wear is visible on the slide surfaces
• Mounting hardware is loose or damaged
• Drawer no longer closes completely
• Drawer gasket does not contact the cabinet evenly

These symptoms do not automatically confirm slide failure. Drawer alignment, mounting hardware, drawer rollers or related guides where applicable, cabinet damage, gasket condition, and physical damage to the drawer itself can create similar symptoms.

Why Drawer Alignment Matters

A refrigerated drawer should close squarely and consistently against the cabinet. Worn or damaged slides can allow the drawer to shift from its intended position, potentially affecting both operation and sealing.

Poor drawer alignment can contribute to:

• Uneven gasket compression
• Warm-air infiltration
• Condensation around the drawer opening
• Difficulty closing the drawer
• Premature gasket wear
• Additional stress on drawer hardware
• Inconsistent refrigerated cabinet conditions

Restoring the mechanical alignment of the drawer can help correct these conditions when the cabinet and other drawer components are otherwise in serviceable condition.

Inspect Both Drawer Slides

When one drawer slide is worn or damaged, inspect the slide on the opposite side as well. Uneven wear between the right- and left-hand assemblies can contribute to binding or misalignment.

Inspect both sides for:

• Bending or distortion
• Excessive wear
• Loose mounting hardware
• Corrosion or contamination
• Damaged mounting points
• Uneven drawer travel
• Excessive play

Replace only the components that require service, but make sure both sides allow the drawer to travel smoothly and remain properly aligned.

Technician Checks Before Ordering

Before ordering True drawer-slide components, verify:

• 939674 = Right-Hand Drawer Slide
• 939673 = Left-Hand Drawer Slide
• Complete True equipment model
• Equipment serial number
• Side of the drawer requiring replacement
• Original slide configuration
• Mounting-hole arrangement
• Drawer position within the cabinet
• Mounting hardware condition
• Drawer alignment
• Drawer gasket condition
• Cabinet mounting points

OEM part-number verification is especially important because right- and left-hand drawer slides may appear similar but are designed for specific mounting positions.

Check the Drawer Gasket During Service

A drawer that has operated with worn or misaligned slides may develop uneven gasket wear. When servicing the drawer slides, inspect the gasket around the entire drawer perimeter.

Look for:

• Flattened gasket sections
• Torn corners
• Cracks or splits
• Areas that do not contact the cabinet
• Permanent distortion
• Damage caused by drawer misalignment

If the gasket has been permanently damaged, restoring drawer alignment alone may not completely restore the refrigerated seal.

Cleaning & Inspection

Food debris, grease, dirt, and other contamination can interfere with drawer movement. Before condemning the slide assembly, inspect and clean the accessible drawer hardware according to appropriate True service procedures.

Do not force a binding drawer. Determine whether the resistance is caused by contamination, misalignment, damaged hardware, or a physically bent slide before returning the equipment to service.

Installation & Service Notes

Before removing the original drawer slide, document its orientation, mounting position, hardware arrangement, and relationship to the drawer and cabinet.

Support the drawer during service and remove it according to the applicable True equipment procedure. Compare the replacement component with the original slide before installation.

Install the correct side-specific component:

• 939674 on the right-hand application
• 939673 on the left-hand application

After installation, operate the drawer through its complete range several times. Verify smooth travel, proper alignment, secure mounting, and consistent closure against the cabinet.

Confirm that the drawer gasket contacts the cabinet evenly when the drawer is fully closed.

Commercial Refrigeration Applications

Compatible True drawer refrigeration equipment is commonly used in demanding commercial environments including:

• Restaurants
• Commercial kitchens
• Pizza preparation stations
• Food preparation lines
• Hotels
• Schools
• Hospitals
• Universities
• Institutional kitchens
• Catering operations
• High-volume foodservice facilities

Why Correct OEM Drawer Slide Identification Matters

Commercial refrigeration drawer slides can appear similar while having different lengths, mounting points, offsets, load requirements, and right- or left-hand configurations.

Using True OEM 939674 for the right-hand slide and True OEM 939673 for the left-hand slide provides clear identification when comparing replacement hardware with the original components.

Always verify the complete True model, serial number, original slide, mounting position, and required side before ordering.

Frequently Asked Questions

What is True 939674?

True 939674 is the OEM right-hand drawer slide used in compatible True commercial refrigeration equipment.

What is True 939673?

True 939673 is the OEM left-hand drawer slide used in compatible True commercial refrigeration equipment.

Are True 939674 and 939673 the same part?

No. They are side-specific drawer-slide components. 939674 is right hand and 939673 is left hand.

Which True models use these drawer slides?

They are listed for compatible TPP119D2, TPP119D4, TPP60D2, TPP67D4, TPP93D6, TRCB110, TRCB36, TRCB48, TRCB50, TRCB52, TRCB5260, TRCB72, TRCB79, TRCB7986, TRCB82, TRCB8284, TRCB8286, TRCB96, and TUC6032D2 equipment.

Can a worn drawer slide cause the drawer gasket to leak?

Yes. A worn or damaged slide can allow the drawer to sag or become misaligned, which can prevent even gasket contact with the cabinet.

Why is my True refrigerated drawer difficult to open?

Possible causes include slide wear, contamination, bent hardware, loose mounting points, drawer misalignment, or another mechanical obstruction.

Should both drawer slides be replaced at the same time?

Not automatically. Inspect both sides and replace the components that are worn or damaged. Both slides should allow smooth, properly aligned drawer travel.

How do I know whether I need 939674 or 939673?

Determine which side of the drawer requires replacement and compare the original part. 939674 is the right-hand slide and 939673 is the left-hand slide.

How do I confirm these are correct for my True equipment?

Verify the complete True model and serial number, original drawer-slide part number, mounting arrangement, and required right- or left-hand position before ordering.

Is professional installation recommended?

Qualified commercial refrigeration personnel can verify drawer alignment, mounting, gasket contact, and related hardware when the drawer does not operate or seal correctly.

Why Buy From Parts Direct Online?

Parts Direct Online supplies OEM commercial refrigeration and commercial cooking replacement parts for service technicians, contractors, restaurants, supermarkets, schools, hospitals, institutional kitchens, and foodservice facilities throughout the United States. Our focus is helping commercial equipment professionals identify the correct OEM replacement component and minimize costly equipment downtime.