Traulsen 325-60209-00 Genuine OEM Dual Blower Assembly 115V 2350 RPM

Traulsen 325-60209-00 Genuine OEM Dual Blower Assembly – 115V, 2350 RPM

The Traulsen 325-60209-00 is a Genuine OEM dual blower motor assembly designed for compatible Traulsen commercial refrigeration and freezer equipment. This assembly operates at 115 volts, runs at approximately 2350 RPM, and uses an ECM motor identified as BH1400.

The blower assembly circulates air through the refrigerated cabinet and across the refrigeration system's evaporator area to help maintain consistent temperatures throughout the equipment. Proper airflow is essential for heat transfer, temperature recovery, and reliable commercial refrigeration performance.

Use Traulsen manufacturer part number 325-60209-00 as the primary identifier when selecting this replacement. Always verify the equipment model, serial number, voltage, original blower configuration, mounting arrangement, and electrical connections before ordering.

Product Details

• Manufacturer: Traulsen
• Manufacturer Part Number / MPN: 325-60209-00
• Part Type: Dual Blower Motor Assembly
• Classification: Genuine OEM
• Voltage: 115V
• Speed: 2350 RPM
• Motor Type: ECM
• Motor Reference: BH1400
• Application: Commercial Refrigeration & Freezer Equipment
• Function: Refrigerated cabinet and evaporator airflow

What the Traulsen 325-60209-00 Blower Assembly Does

The Traulsen 325-60209-00 moves air through compatible commercial refrigeration equipment. Air movement across the evaporator area allows heat from the refrigerated cabinet to transfer into the refrigeration system while helping distribute cooled air throughout the cabinet.

The dual-blower arrangement provides air circulation across the refrigeration compartment so stored products can experience more consistent cabinet conditions.

Why Proper Blower Airflow Matters

Refrigeration performance depends on more than the compressor alone. Proper airflow across the evaporator and through the refrigerated cabinet is necessary for effective heat transfer and temperature distribution.

Reduced or interrupted blower airflow can contribute to:

• Uneven cabinet temperatures
• Slow temperature recovery
• Reduced airflow through the refrigerated compartment
• Abnormal evaporator frost patterns
• Longer refrigeration-system run times
• Hot or warm areas inside the cabinet
• Difficulty maintaining the desired temperature

Verified Traulsen Application References

Current commercial parts catalogs identify Traulsen 325-60209-00 for multiple refrigeration models and equipment families, including application references such as:

• G200 and G200XX Series
• G210 and G210XX Series
• G220 and G220XX Series
• G300 and G300XX Series
• G310XX Series
• G313XX Series
• G320 and G320XX Series
• G22013
• RD132W-ZCF01
• RL232W-ZCF02
• RL232N-1
• AR232L-ZPH02
• AH232WP-269

Model references should not replace an OEM part-number and serial-number check. Traulsen equipment can have production revisions that affect electrical or mechanical component selection.

Common Signs a Blower Assembly May Need Replacement

• Blower motors do not operate
• One or both blowers operate intermittently
• Reduced airflow inside the refrigerated cabinet
• Motor runs slowly or fails to reach normal speed
• Unusual humming, grinding, or bearing noise
• Cabinet develops uneven temperatures
• Evaporator develops an abnormal frost pattern
• Motor or wiring shows signs of overheating
• Blower assembly has physical or electrical damage

These symptoms do not automatically confirm a failed blower assembly. Similar problems can be caused by wiring faults, control issues, ice buildup, damaged blower wheels, electrical supply problems, sensors, or other refrigeration-system conditions.

ECM Blower Motor

The Traulsen 325-60209-00 is identified with an ECM BH1400 motor configuration. ECM motor electronics and wiring should be diagnosed according to the original equipment configuration rather than treated as a generic shaded-pole or standard induction fan motor.

Do not substitute another blower motor based only on voltage or physical appearance. Motor type, speed, wiring, mounting, blower configuration, and equipment application must all be considered.

Technician Service Information

Before replacing the Traulsen 325-60209-00, disconnect equipment power and inspect the complete blower system.

Check the following:

• Supply voltage to the blower assembly
• Electrical connectors and wiring
• ECM motor connections
• Blower wheels for free rotation
• Blower housing and mounting hardware
• Ice or debris restricting airflow
• Related temperature and refrigeration controls

After installation, verify that both blower sections operate correctly, that airflow is unobstructed, and that the assembly runs without excessive vibration or abnormal noise.

Before You Order

Confirm Traulsen manufacturer part number 325-60209-00 before ordering. Do not select a blower assembly solely by appearance.

Verify the following against the original equipment:

• Traulsen manufacturer part number 325-60209-00
• 115V electrical rating
• 2350 RPM motor speed
• ECM motor configuration
• BH1400 motor reference
• Dual-blower arrangement
• Equipment model number
• Equipment serial number
• Mounting pattern and housing configuration
• Electrical connector and wiring arrangement

If the original manufacturer number cannot be confirmed, provide the Traulsen equipment model, serial number, and clear photos of the original blower assembly and motor label before ordering.

Frequently Asked Questions

What is Traulsen part number 325-60209-00?
Traulsen 325-60209-00 is a Genuine OEM blower motor assembly used in compatible Traulsen commercial refrigeration and freezer equipment.

What voltage is Traulsen 325-60209-00?
The blower assembly is rated for 115V operation.

What speed does Traulsen 325-60209-00 operate at?
The blower motor assembly is listed at approximately 2350 RPM.

What type of motor does the 325-60209-00 use?
The assembly is identified with an ECM motor configuration and BH1400 motor reference.

Is Traulsen 325-60209-00 a dual blower assembly?
Yes. Commercial parts references identify this configuration as a dual blower assembly used for air circulation in compatible Traulsen refrigeration equipment.

Can a bad blower assembly cause poor cooling?
Yes. Reduced or missing airflow can interfere with evaporator heat transfer and cabinet air circulation, which can contribute to poor or uneven cooling.

Does Traulsen 325-60209-00 fit G Series equipment?
The part is documented for multiple G Series applications, including G200, G210, G220, G300, G310, G313, and G320 families. Always verify the exact model, serial number, and original manufacturer part number before ordering.

How do I confirm Traulsen 325-60209-00 is the correct replacement?
Match manufacturer part number 325-60209-00 whenever possible and verify the equipment model, serial number, 115V rating, 2350 RPM speed, ECM configuration, mounting arrangement, and electrical connections.

Ordering Traulsen Commercial Refrigeration Parts

PartsDirectOnline supplies commercial refrigeration replacement parts for service technicians, restaurants, supermarkets, commercial kitchens, institutional facilities, and maintenance departments. Using the correct Traulsen manufacturer number 325-60209-00 together with the equipment model and serial number helps improve replacement-part identification and reduce ordering errors.