Anthony / Hussmann Torque Rod 29 Inch Hex | OEM Replacement

OEM Part Details

• Manufacturer: Anthony
• OEM Number: 559360
• OEM Status: VERIFIED
• MPN: 559360
• SKU: 559360
• Part Type: Door Gasket

Product Overview

Anthony OEM 559360 is a door gasket used with commercial refrigeration equipment door assemblies. This gasket forms the sealing surface between the door and its frame when the door closes. A dependable seal matters because it helps limit warm-air entry at the door opening, supports stable cabinet conditions, and helps the refrigeration system avoid unnecessary run time caused by air leakage. On display-door and merchandising refrigeration equipment, the condition of the door seal can also affect moisture control, frost buildup around the opening, and the overall appearance of the refrigerated display area. Door gaskets are wear-related components that can lose compression, tear, become hardened, or pull away from their mounting area over time. Replacing a worn gasket with the correctly identified Anthony OEM part helps technicians and operators restore the intended door-sealing interface without relying on an unconfirmed substitute. OEM number 559360 is the key ordering identifier for this gasket. Before purchase, compare the original component, door details, mounting style, and equipment data-plate information to help ensure the correct part is selected.

Product Function

The Anthony 559360 door gasket helps create a close-fitting seal around a commercial refrigeration door opening. When the door is shut, the gasket compresses against the mating frame surface to reduce air movement through the perimeter of the door. This supports door sealing, helps protect refrigerated cabinet conditions, and can reduce moisture or frost concerns associated with an incomplete seal. Its role is mechanical rather than electrical: the gasket depends on proper door alignment, latch engagement, hinge condition, and clean sealing surfaces to perform as intended. Even the correct gasket may not seal well if the door is sagging, the frame is damaged, or the mounting channel does not hold the gasket securely.

Why Choose a Genuine OEM Replacement?

Anthony OEM door gasket 559360 provides a reliable manufacturer part-number reference for ordering. Matching the OEM number helps distinguish this gasket from visually similar door seals that may have a different profile, mounting arrangement, or door application. Using the verified Anthony part number also gives service personnel a clearer basis for comparing the original gasket and documenting the component selected for repair. Confirming the original part and door details before ordering remains important, especially where door assemblies or mounting arrangements vary.

How This Part Works

A door gasket works by providing a compressible perimeter seal between a closed refrigeration door and the frame or mating surface. As the door closes, the gasket contacts the sealing surface and compresses enough to limit gaps around the opening. That contact helps reduce the amount of warmer, humid air that can enter through the door perimeter. The gasket’s performance is affected by more than the gasket itself. A clean, undamaged frame surface helps the seal make consistent contact. Door hinges, latches, closers, and mounting areas influence whether the door closes squarely and maintains compression around all sides. If the door is misaligned or held open by damaged hardware, a new gasket can show uneven contact or premature wear. Inspecting the surrounding door assembly helps identify conditions that may interfere with proper sealing after the gasket is installed.

Technician Service Tip

Before replacing the gasket, inspect the door perimeter and mounting area for debris, damage, loose sections, or uneven contact marks. Check door alignment, hinge wear, and latch operation as well, since these conditions can prevent consistent gasket compression.

Common Failure Symptoms

• Visible tears, splits, or missing sections of the door gasket may indicate that the seal should be inspected.
• A door that does not close evenly against the frame can indicate gasket compression loss or an alignment concern.
• Moisture or condensation near the door perimeter may indicate air leakage through the sealing area.
• Frost forming around the door opening may indicate that the gasket or surrounding door assembly needs inspection.
• A gasket that feels hardened, flattened, or permanently compressed may no longer provide consistent contact.
• Corners that pull away from the mounting area may indicate a worn gasket or a problem with the gasket retainer.
• Visible gaps between the closed door and frame may indicate a sealing, hinge, latch, or door-alignment issue.
• Frequent wiping of moisture near the door edge can indicate that the door seal should be evaluated.
• Uneven contact marks around the door perimeter may indicate that the gasket is not compressing uniformly.

Commercial Applications

This Anthony door gasket is identified for commercial refrigeration equipment door-sealing service. It is relevant to service work involving refrigerated display doors, merchandising refrigeration, and other commercial door assemblies where the verified OEM number applies. In retail food display and beverage merchandising environments, a properly sealing door helps support orderly refrigerated presentation while limiting air leakage at the door perimeter. Refrigeration service companies, facility maintenance teams, and foodservice equipment technicians should compare the original gasket and confirm equipment data-plate details before ordering, because door configuration and mounting arrangements must be correct for a successful repair.

Before You Order

• Match Anthony OEM number 559360 to the original part or approved equipment documentation.
• Compare the original gasket profile with the product image and the component being replaced.
• Confirm the part is a door gasket for the applicable commercial refrigeration door assembly.
• Review equipment data-plate details, including the equipment identification and serial number.
• Inspect how the original gasket is retained in the door or frame before selecting a replacement.
• Check the complete door perimeter for gasket damage, missing sections, or uneven compression.
• Inspect door hinges for wear or misalignment that could prevent uniform gasket contact.
• Check latch, closer, and strike condition where present, since closure force affects sealing.
• Examine the mating frame surface for damage, debris, or conditions that could interfere with the seal.

Related Components

• Door hinges should be inspected because hinge wear or door sag can prevent the gasket from contacting the frame evenly.
• Door latches should be checked because insufficient latch engagement can leave gaps at the sealing surface.
• Door closers should be evaluated where used, since a closer that does not bring the door fully shut can reduce gasket compression.
• Gasket retainers or mounting tracks should be inspected for damage or looseness that could allow sections of the gasket to pull away.
• Door frames and sealing surfaces should be checked for damage, debris, or uneven areas that can interfere with a consistent seal.

Frequently Asked Questions

What is Anthony OEM part 559360?

Anthony OEM part 559360 is identified as a door gasket for commercial refrigeration equipment door-sealing service.

What does a commercial refrigeration door gasket do?

A door gasket creates a compressible seal between the closed door and its mating frame surface, helping limit air leakage around the door perimeter.

How do I confirm that 559360 is the correct gasket?

Match OEM number 559360 to the original component or approved equipment documentation, then compare the gasket profile, mounting arrangement, and door details before ordering.

Can a worn door gasket contribute to moisture or frost near the door?

Yes. A torn, flattened, hardened, or poorly seated gasket may allow air movement at the door opening, which can contribute to moisture or frost concerns.

Should hinges and latches be checked when replacing a door gasket?

Yes. Hinge alignment, latch engagement, and door closing condition affect how evenly the gasket compresses against the frame.

Does this listing confirm equipment fitment?

This identification confirms Anthony OEM number 559360 and the door gasket part type. Confirm equipment data-plate details and compare the original component before ordering.