Silver King Salad Hopper Door — 10 Inch × 18-3/4 Inch | Stainless Frame with Plexiglass | Reversible Bracket

OEM Part Details

• OEM Number: 10335-02
• OEM Status: VERIFIED
• MPN: 10335-02
• SKU: PD-757-037
• Part Type: Gasket

Product Overview

OEM Part Details OEM Part Number: 10335-02 MPN: 10335-02 SKU: PD-757-037 Part Type: Door Gasket OEM Status: VERIFIED Product Overview OEM part 10335-02 is a door gasket used in commercial refrigeration equipment to help maintain a dependable seal at the door opening. A gasket that seats evenly around the door perimeter helps limit unwanted air exchange between the cabinet and the surrounding area. That seal matters because door leakage can contribute to moisture around the opening, frost buildup, reduced temperature stability, and longer refrigeration system run time. As a wear-related door component, the gasket should be evaluated whenever the original seal is torn, hardened, compressed, distorted, or no longer contacting the cabinet evenly. Replacing a worn gasket can help restore proper door closure and support normal cabinet operation when the surrounding door hardware and sealing surface are in good condition. Part number 10335-02 provides a reliable identification point for commercial equipment service teams ordering this door gasket. Compare the removed component, its sealing edge, mounting arrangement, and overall shape before purchase to reduce the chance of selecting the wrong part.

Product Function

Product Function This door gasket creates a compressible barrier between the door assembly and the cabinet opening. When the door closes, the gasket is intended to contact the mating surface around the opening and reduce air leakage. In commercial refrigeration service, a consistent door seal supports cabinet temperature management by helping keep warmer, moisture-laden surrounding air from entering through gaps at the door edge. The gasket also works with the door, hinges, latch, and sealing surface. Even the correct replacement gasket may not seal properly if the door is misaligned, the hinge condition is poor, the latch does not hold the door closed, or the contact surface is damaged. Inspecting those related areas helps identify whether the gasket is the only component requiring attention.

Why Choose a Genuine OEM Replacement?

Why Choose a Genuine OEM Replacement? OEM number 10335-02 gives service personnel a specific manufacturer part-number reference for this door gasket. Ordering by the verified OEM number helps distinguish the intended component from similar-looking door seals that can differ in shape, mounting arrangement, sealing edge, or overall configuration. Matching the original component to the OEM number and reviewing the removed gasket before ordering can reduce wrong-part orders and support a more confident repair decision.

How This Part Works

How This Part Works A door gasket performs its job through contact and compression. As the door moves into the closed position, the gasket is pressed against the cabinet-side sealing surface. A gasket in good condition should sit continuously around the opening without obvious gaps, folds, tears, or areas that remain flattened away from the contact surface. This perimeter contact helps reduce the path available for outside air and moisture to enter the refrigerated space. Door sealing depends on more than the gasket alone. The door must close squarely, the hinge points must support proper alignment, and the latch or closing hardware must keep the door positioned against the cabinet. Dirt, damage, or irregularities on the sealing surface can also interrupt contact. For that reason, a gasket inspection should include both the replacement part and the door assembly it serves.

Technician Service Tip

Technician Service Tip Before removing the original gasket, note how it sits around the door edge and inspect the mating surface for residue, damage, or areas that prevent full contact. Compare the replacement gasket with the removed component, including its perimeter shape and mounting arrangement. Also inspect hinge and latch condition if the door does not close evenly.

Common Failure Symptoms

• Tears, splits, or missing sections along the gasket edge may indicate that the door seal should be inspected.
• A gasket that remains flattened or does not recover its shape can indicate compression loss.
• Visible gaps between the closed door and cabinet opening may indicate poor gasket contact or door alignment concerns.
• Moisture collecting near the door opening can indicate air leakage through the door seal area.
• Frost forming around the door perimeter may indicate that warmer air is entering through an uneven seal.
• A door that requires unusual pressure to stay closed should be inspected for gasket, hinge, or latch concerns.
• Cabinet temperature instability may indicate a door-sealing issue among other refrigeration system conditions.
• A gasket that pulls away, shifts, or will not remain seated should be inspected for mounting-area damage or an incorrect replacement configuration.

Commercial Applications

Commercial Applications This door gasket is identified for commercial refrigeration equipment and is relevant to service work involving refrigerated cabinet door assemblies. Foodservice maintenance teams, restaurant repair operations, and commercial refrigeration service providers may inspect this type of component when addressing door sealing concerns, moisture near the door opening, frost around the perimeter, or visible deterioration of the original gasket. Its role is limited to the door-seal area rather than the refrigeration control circuit or compressor system. A correct gasket can support normal cabinet operation only when the door closes properly and the related hinges, latch, and sealing surface are in serviceable condition. Equipment-specific fitment should be confirmed from the equipment data plate, serial number, and original component before ordering.

Before You Order

• Match OEM part number 10335-02 to the original component whenever that number is available.
• Compare the removed gasket with the product identification and visible product image.
• Confirm the part is being ordered for a commercial refrigeration door-seal application.
• Review the gasket perimeter shape and sealing-edge arrangement against the original component.
• Check how the original gasket attaches to the door before selecting a replacement.
• Inspect the door-side mounting area for damage, residue, or distortion that could affect gasket seating.
• Confirm the equipment data plate and serial number before finalizing the order.
• Inspect door hinges and latch hardware for alignment or closure concerns that may affect the seal.

Related Components

• Door hinges should be inspected because sagging or misalignment can prevent the gasket from making even contact around the cabinet opening.
• Door latch hardware should be inspected because weak or damaged closure hardware may allow the door to remain slightly open against the gasket.
• Door closer components should be evaluated where present because incomplete door closing can appear similar to a gasket-related sealing problem.
• The gasket retainer or mounting track should be checked for damage or buildup that can keep the replacement gasket from seating correctly.

Frequently Asked Questions

What is OEM part number 10335-02?

OEM part number 10335-02 identifies this commercial refrigeration door gasket.

What does a commercial refrigeration door gasket do?

A door gasket helps seal the space between the closed door and cabinet opening, reducing air leakage and moisture entry around the door perimeter.

How can I tell whether a door gasket should be inspected?

Inspect the gasket for tears, hardening, flattened areas, uneven contact, visible gaps, moisture near the opening, or frost around the door edge.

Should the door hardware be checked when replacing a gasket?

Yes. Hinge alignment, latch condition, door closing action, and the cabinet-side sealing surface can all affect how well a gasket contacts the opening.

What should I compare before ordering OEM 10335-02?

Compare the OEM number, removed gasket shape, sealing edge, mounting arrangement, equipment data plate, serial number, and product image before ordering.