Kolpak OEM Door Frame Heater Cover – 79" LH / RH

Kolpak OEM Door Frame Heater Cover / Trim – Left-Hand & Right-Hand

The Kolpak Door Frame Heater Cover / Trim is a genuine OEM walk-in refrigeration door component available in separate left-hand and right-hand configurations. These long metal trim pieces install along the applicable side of a Kolpak walk-in cooler or freezer door frame and form part of the door-frame trim and heater-cover arrangement.

The correct replacement depends on door handing. Kolpak uses separate manufacturer numbers for the two sides:

• Left-Hand OEM: 242071075
• Right-Hand OEM: 242081075

Proper door-frame trim is important because bent, loose, missing, or incorrectly selected cover pieces can interfere with the door-frame assembly, associated heater-wire routing, trim alignment, and surrounding walk-in door components.

When inspection confirms replacement is required, select the correct Kolpak OEM left-hand or right-hand cover rather than ordering by length or appearance alone.

OEM Part Details

• Manufacturer: Kolpak
• Left-Hand OEM Part Number: 242071075
• Right-Hand OEM Part Number: 242081075
• Part Type: Door Frame Heater Cover / Door Trim
• Application: Commercial Walk-In Cooler & Freezer Doors
• Material: Aluminum / Metal Door Trim
• Handing: Separate Left-Hand and Right-Hand Versions
• Nominal Length: Approximately 78–79" depending on published measurement reference
• Function: Door Frame Trim / Heater-Area Cover & Retention

Left-Hand Kolpak 242071075

Kolpak 242071075 is the genuine OEM left-hand door-frame trim. Parts Town identifies it as the left-hand door trim, while commercial service-parts documentation describes it as the left-hand heater cover used along the applicable side of the walk-in door assembly.

• OEM Number: 242071075
• Handing: Left-Hand
• Application: Left side of applicable walk-in door-frame assembly

Right-Hand Kolpak 242081075

Kolpak 242081075 is the genuine OEM right-hand door-frame trim / heater cover for the corresponding side of compatible Kolpak walk-in door assemblies.

• OEM Number: 242081075
• Handing: Right-Hand
• Application: Right side of applicable walk-in door-frame assembly

Why Left-Hand vs. Right-Hand Matters

The two trim pieces are not the same part number. Door-frame trim can include handed end cuts, miters, profiles, or mounting relationships that determine which side of the opening it fits.

Before ordering, determine whether the required replacement is:

• Left-Hand – 242071075
• Right-Hand – 242081075

Do not assume one side can simply be flipped and used on the opposite side.

Heater Cover vs. Heater Wire

This listing is for the metal door-frame cover / trim, not the electrical perimeter heater wire itself.

In a heated walk-in door-frame system:

• Heater Cover / Trim: Provides the physical door-frame trim and covers or retains components in the heater area.
• Heater Wire: Is the separate electrical heating element used to help reduce condensation or freezing around the door opening.

If the service concern involves lack of heat, inspect the heater circuit separately before replacing the trim.

Common Reasons to Replace the Door Frame Cover

• Trim is bent or distorted
• Cover no longer sits flush against the door frame
• Mounting points are damaged
• Trim is loose or missing
• Metal has been damaged during previous door service
• Heater-area components are no longer retained correctly
• Door-frame appearance or alignment is compromised
• Original cover was damaged during heater-wire replacement

These conditions do not automatically mean the heater wire or surrounding door hardware is defective. Inspect the complete door-frame assembly before replacing components.

Inspect the Heater Wire

If the cover is being removed because of a door-frame heating concern, inspect the electrical heater separately.

Check applicable:

• Heater-wire continuity
• Correct supply voltage
• Wire insulation
• Electrical connectors
• Wire routing
• Burned or damaged sections
• Moisture or corrosion
• Contact with sharp metal edges

A replacement heater cover will not correct an electrically failed heater wire.

Inspect Surrounding Walk-In Door Components

When servicing the trim, inspect the surrounding door system for:

• Door gasket condition
• Door alignment
• Hinge condition
• Latch and strike alignment
• Header trim
• Lower trim or threshold components
• Heater-wire routing
• Mounting fasteners

Length & Profile Verification

Published sources describe these Kolpak trims as approximately 78–79 inches long, while some commercial service listings refer to the application as a 79-3/8" heater cover. Because published measurements vary depending on whether the trim body, nominal size, or application dimension is being referenced, the OEM number and original component should be the primary fitment method.

Before ordering, compare:

• OEM part number
• Left- or right-hand configuration
• Overall original trim length
• Cross-sectional profile
• Mitred end orientation
• Mounting arrangement
• Original door-frame position

Do not order by length alone.

No Verified Public Model Fitment List

Current OEM parts listings do not provide a reliable model-by-model fitment list for 242071075 or 242081075. Confirm compatibility using the OEM number, walk-in identification, original door component, handing, dimensions, profile, and mounting arrangement.

Technician Checks Before Ordering

• Confirm Kolpak manufacturer
• Determine left-hand or right-hand side
• Verify OEM 242071075 for LH
• Verify OEM 242081075 for RH
• Compare original trim length
• Compare trim profile
• Check mitred-end orientation
• Compare mounting points
• Verify walk-in door/frame configuration
• Inspect associated heater wire where applicable

Commercial Walk-In Applications

Kolpak walk-in door-frame parts are used in commercial refrigeration environments including:

• Walk-in coolers
• Walk-in freezers
• Restaurant cold-storage rooms
• Supermarkets
• Convenience stores
• Hotels
• Schools
• Hospitals
• Institutional kitchens
• Food distribution facilities
• Commercial foodservice operations

Installation & Service Notes

Before removing the original trim, document its position and orientation.

Record:

• Left- or right-hand location
• End-cut / miter orientation
• Mounting points
• Fastener locations
• Heater-wire routing
• Relationship to surrounding door trim

Compare the replacement component with the original before installation.

After installation, verify:

• Trim sits correctly against the door frame
• Mounting remains secure
• No sharp edges interfere with wiring
• Heater wire remains correctly routed where applicable
• Door movement is unobstructed
• Surrounding trim remains properly aligned

Why Correct Kolpak OEM Identification Matters

Walk-in door trim can appear nearly identical while using different lengths, handings, mitred ends, profiles, and mounting arrangements.

Use Kolpak 242071075 for the left-hand side and Kolpak 242081075 for the right-hand side as the primary OEM identification points.

Frequently Asked Questions

What is Kolpak 242071075?

Kolpak 242071075 is a genuine OEM left-hand door-frame trim / heater cover for compatible Kolpak walk-in refrigeration assemblies.

What is Kolpak 242081075?

Kolpak 242081075 is the corresponding genuine OEM right-hand door-frame trim / heater cover.

Are the left-hand and right-hand covers the same part?

No. They use separate Kolpak OEM numbers and should be ordered according to the side of the door-frame assembly being serviced.

How long are the trims?

Current OEM listings generally describe them in the 78–79" range. Some commercial parts documentation describes the heater-cover application as 79-3/8". Verify the OEM number and original trim rather than relying solely on nominal length.

What material are the covers?

Published parts information identifies the door trim as aluminum / metal construction.

Is the heater cover itself electrically heated?

No. The cover is a mechanical trim component. The electrical heater wire, where used, is a separate service part.

Should the heater wire be inspected when replacing the cover?

Yes, especially if the service concern involves condensation, frost, or lack of heat around the door frame.

Can I flip the left-hand trim and use it on the right side?

Do not assume so. The two handings have separate OEM part numbers and may use different end geometry or mounting orientation.

Does Kolpak publish a model list for these trims?

A reliable public model-fitment list is not currently published by the OEM parts source checked. Verify the original component and equipment configuration.

How do I confirm the correct side?

Compare the removed trim, miter/end orientation, mounting location, and OEM number. Left-hand is 242071075; right-hand is 242081075.

Is professional installation recommended?

Qualified walk-in refrigeration personnel can verify handing, heater-wire routing, trim profile, mounting, and surrounding door hardware during replacement.

Why Buy From Parts Direct Online?

Parts Direct Online supplies genuine OEM Kolpak walk-in cooler and freezer door trim, heater covers, heater wire, gaskets, hinges, latches, closers, retainers, and related commercial refrigeration replacement parts for service technicians, contractors, restaurants, supermarkets, cold-storage facilities, and foodservice operations throughout the United States.