Glastender Magnetic Snap-In Gasket (Offset Magnet) — Cooler/Freezer Door Seal

OEM Part Details

• Manufacturer: Glastender
• OEM Number: 06001309
• OEM Status: VERIFIED
• MPN: 06001309
• SKU: PD-758-043
• Part Type: Door Gasket

Product Overview

OEM Part Details Manufacturer: Glastender OEM Part Number: 06001309 MPN: 06001309 SKU: PD-758-043 Part Type: Magnetic Snap-In Door Gasket with Offset Magnet OEM Status: VERIFIED Product Overview A dependable door seal begins with the gasket seated around the door edge. Glastender 06001309 is a magnetic snap-in door gasket with an offset magnet, made to help a commercial refrigeration door close against the cabinet opening and maintain a consistent seal. Its magnetic section helps draw the gasket toward the cabinet frame, while the snap-in mounting design is intended to engage the door's gasket-retention channel. When a door gasket is worn, torn, hardened, distorted, or no longer seated correctly, outside air can enter around the door perimeter. That air leakage may contribute to moisture, frost, reduced door contact, and added demand on refrigeration equipment. Replacing a damaged seal can help restore proper door closure when the correct gasket profile is selected and the door assembly is in suitable condition. This Glastender OEM part is identified by manufacturer part number 06001309. The offset-magnet arrangement and snap-in profile are important ordering details, so the removed gasket, door channel, and equipment identification information should be compared before purchase. A correct match helps avoid ordering a gasket that looks similar but does not seat or seal properly.

Product Function

Product Function This door gasket forms the sealing surface between a Glastender commercial refrigeration door and the cabinet frame. The magnetic portion assists the door in maintaining contact around the opening, while the gasket body provides compression where the door closes. Together, these features help limit cabinet air leakage through the door perimeter. The snap-in design allows the gasket to be retained in the appropriate door channel rather than relying on an adhesive-mounted arrangement. The offset magnet is a profile-specific characteristic that should match the original component. A gasket cannot correct a bent door, damaged retention channel, weak latch action, or hinge misalignment, but it is a key wear component in maintaining the door seal when those related parts are in serviceable condition.

Why Choose a Genuine OEM Replacement?

Why Choose a Genuine OEM Replacement? Glastender OEM part number 06001309 provides a reliable identification point for this magnetic snap-in door gasket. Matching the manufacturer part number helps distinguish this offset-magnet gasket from similar-looking door seals with different mounting shapes or magnetic placement. Using the identified OEM number, comparing the removed gasket, and reviewing the door mounting channel can reduce the chance of a wrong-part order and support more confident commercial equipment service.

How This Part Works

How This Part Works As the door moves shut, the gasket contacts the cabinet frame around the opening. Its flexible sealing surface compresses between the door and frame, and the offset magnet helps hold the gasket against the mating surface. This contact is intended to create a continuous barrier around the door perimeter rather than allowing open paths where warmer, moisture-laden air can enter the cabinet. The snap-in portion of the gasket is retained by the door's gasket channel. For the seal to work as intended, the gasket must be the correct profile, fully seated, and free from significant tears, twists, or compression damage. Door alignment also matters: if hinges, latch components, or the door itself do not position the gasket evenly against the cabinet, sealing performance may be affected even when the gasket appears intact.

Technician Service Tip

Technician Service Tip Before replacing the gasket, inspect the full door channel for debris, damage, or areas where the original seal has pulled free. Compare the snap-in edge and offset-magnet orientation of the removed component with Glastender part number 06001309. Also inspect door hinges and latch condition, since uneven door alignment can prevent a new gasket from making even contact around the cabinet opening.

Common Failure Symptoms

• A split, torn, or missing section of the door seal may indicate that the gasket should be inspected.
• The door may require extra pressure to stay closed when gasket compression or magnetic contact has weakened.
• Visible gaps between the gasket and cabinet frame can indicate an improperly seated, distorted, or worn seal.
• Moisture collecting near the door opening may indicate air entering around the gasket perimeter.
• Frost developing near the door frame can indicate that the door seal or door alignment should be evaluated.
• A gasket that curls away from the door edge or repeatedly slips from its channel should be inspected for profile damage or retention-channel issues.
• Uneven contact marks around the gasket may indicate door sag, hinge wear, or an alignment concern affecting the seal.
• A hardened, flattened, or permanently compressed gasket may no longer provide consistent contact against the cabinet frame.
• The magnetic portion may show reduced holding contact if the gasket is damaged, twisted, or not seated correctly.
• Cabinet temperature concerns near a frequently opened door may warrant inspection of the gasket, door closure, and related hardware.

Commercial Applications

Commercial Applications Glastender 06001309 is a door-sealing component for Glastender commercial refrigeration equipment where the documented magnetic snap-in gasket profile is required. It is relevant to restaurant service operations, bar equipment maintenance, foodservice repair companies, and facility teams responsible for refrigeration door condition. Door gaskets are routine wear items because they are exposed to repeated opening, closing, compression, cleaning, and daily commercial use. Equipment-specific fitment is not stated here; confirm the manufacturer part number, equipment identification information, original gasket profile, and door-channel arrangement before ordering.

Before You Order

• Match Glastender OEM part number 06001309 to the equipment documentation or removed component.
• Confirm that the needed part is a magnetic snap-in door gasket rather than another door-seal mounting style.
• Compare the offset-magnet arrangement with the original gasket.
• Review the snap-in edge profile and confirm that it matches the door's gasket-retention channel.
• Compare the overall shape and corner configuration of the removed gasket before purchase.
• Use the equipment data plate and serial number to support identification of the correct door component.
• Inspect the door channel for damage, debris, or deformation that could prevent the gasket from seating.
• Check hinges, latch hardware, and door alignment because a new gasket cannot correct a door that does not close evenly.
• Review available product images against the removed component and confirm the intended door location.
• Avoid relying on appearance alone when selecting a gasket; profile and mounting style are critical.

Related Components

• Door hinges should be inspected because hinge wear or door sag can create uneven gasket contact around the cabinet opening.
• Door latch components should be checked because weak or misaligned latch action can keep the door from fully compressing the gasket.
• Door closers, where used, should be evaluated because incomplete closing can leave portions of the gasket unseated from the cabinet frame.
• The gasket retainer or door channel should be inspected for damage or debris that may prevent the snap-in edge from staying properly seated.

Frequently Asked Questions

What is Glastender part number 06001309?

Glastender 06001309 is a magnetic snap-in door gasket with an offset magnet. It is used as a door-sealing component on applicable Glastender commercial refrigeration equipment.

Why does the offset magnet matter on this gasket?

The offset magnet is part of the gasket profile. Its placement should match the removed gasket so the seal can align correctly with the door and cabinet frame.

How is this door gasket mounted?

This part uses a snap-in mounting arrangement. The gasket edge is intended to seat in the appropriate door gasket-retention channel.

Can a new gasket correct a door that hangs unevenly?

A new gasket may not correct an alignment issue. Inspect hinges, latch components, door closure, and the gasket channel if the door does not meet the cabinet frame evenly.

What signs suggest a door gasket should be inspected?

Tears, flattened areas, visible gaps, poor magnetic contact, moisture near the door opening, frost, or a gasket pulling from its channel can indicate that inspection is needed.

How should I confirm this is the correct Glastender gasket?

Match OEM part number 06001309, compare the original gasket's snap-in edge and offset-magnet profile, and use the equipment data plate and serial number to support part identification.