Continental Refrigerator Epoxy-Coated Wire Shelves – 5-265 / 5-266 / 5-267

Continental Refrigerator Epoxy-Coated Wire Shelves – 5-265, 5-266 & 5-267

This listing includes three Continental Refrigerator epoxy-coated wire shelf options for compatible commercial refrigeration equipment. The available shelves share the same approximate 16-1/2-inch depth but differ in overall width and manufacturer part number.

These shelves are designed to provide stable interior storage while maintaining open space between the wires for refrigerated air circulation. Select the exact shelf required by comparing the Continental manufacturer part number, overall dimensions, equipment model, serial number, and shelf-support spacing before ordering.

The three shelf variants on this page are not automatically interchangeable. Their widths differ, so each option must be matched to the original cabinet configuration.

Available Continental Shelf Options

• 5-265 – approximately 21-1/2" x 16-1/2" – Epoxy-Coated Wire Shelf
• 5-266 – approximately 24" x 16-1/2" nominal – Epoxy-Coated Wire Shelf
• 5-267 – approximately 27-9/16" x 16-1/2" nominal – Epoxy-Coated Wire Shelf

Supplier catalogs sometimes round shelf dimensions differently. For example, 5-266 is also listed as approximately 23-7/8" x 16-1/2", while 5-267 is also listed as approximately 27-1/2" x 16-1/2". Use the manufacturer part number together with the physical shelf and equipment information rather than relying on rounded measurements alone.

Product Details

• Manufacturer: Continental Refrigerator
• Part Type: Wire Shelf
• Available Manufacturer Numbers: 5-265, 5-266, 5-267
• Construction: Wire Shelf
• Finish: Epoxy-Coated
• Application: Commercial Refrigeration Equipment
• Function: Interior product storage and organization

Continental 5-265 – 21-1/2" x 16-1/2"

The Continental 5-265 is an epoxy-coated refrigeration shelf measuring approximately 21-1/2" wide x 16-1/2" deep. Current parts catalogs associate this shelf with compatible Continental prep, undercounter, and worktop refrigeration equipment.

The open wire construction provides a storage surface while allowing refrigerated air to circulate around stored products.

Continental 5-266 – 24" x 16-1/2" Nominal

The Continental 5-266 is an epoxy-coated wire shelf in the approximately 24" x 16-1/2" size class. Some OEM parts catalogs list the exact width as approximately 23-7/8".

Because commercial shelf measurements may be rounded by different suppliers, match manufacturer part number 5-266 whenever possible rather than relying on the nominal 24-inch width alone.

Continental 5-267 – 27-9/16" x 16-1/2" Nominal

The Continental 5-267 is the widest of the three shelf options on this page. It is commonly listed at approximately 27-9/16" x 16-1/2", while some OEM parts catalogs round the width to approximately 27-1/2".

Verify the original shelf and manufacturer number before selecting this larger configuration.

Why Correct Shelf Size Matters

A commercial refrigeration shelf must sit securely on the cabinet's shelf clips, standards, or support points. If the shelf is too narrow or too wide, it may not seat correctly or may become unstable during loading.

An incorrectly sized shelf can:

• Sit unevenly inside the cabinet
• Shift during loading
• Fail to engage the shelf supports correctly
• Interfere with stored products or the cabinet door
• Reduce usable storage space
• Disrupt the intended cabinet layout

Commercial Refrigeration Airflow

Wire shelving is commonly used in commercial refrigerators because the open-grid design allows refrigerated air to move around stored products more freely than a solid shelf.

Do not overload the shelf or block the equipment's designed airflow openings. Proper product spacing helps support even cabinet temperatures and normal refrigeration performance.

Common Reasons for Shelf Replacement

• Shelf frame is bent or distorted
• Individual wires are broken
• Epoxy coating is badly worn or damaged
• Corrosion is present
• Shelf no longer sits level on its supports
• Original shelf is missing
• Incorrect shelf is currently installed
• Equipment is being restored to its intended interior configuration

Technician & Maintenance Information

Before replacing the shelf, inspect the shelf clips, pilaster rails, support standards, and cabinet mounting points.

Confirm that the selected replacement rests evenly on all support points without excessive movement. If the shelf does not sit level, inspect the clips or supports for bending, incorrect placement, or damage.

After installation, verify adequate clearance around stored products and keep cabinet airflow paths unobstructed.

Before You Order

This is a three-variant Continental shelf listing. Select the exact manufacturer number and size required for the equipment.

Confirm the following before purchasing:

• Continental manufacturer part number 5-265, 5-266, or 5-267
• Overall shelf width and depth
• Equipment model number
• Equipment serial number
• Shelf-support spacing
• Cabinet section or shelf position
• Original shelf construction and finish

Do not choose a shelf based only on approximate dimensions. Similar wire shelves can have different widths, support arrangements, finishes, or equipment applications.

Frequently Asked Questions

What size is Continental 5-265?
Continental 5-265 is approximately 21-1/2" x 16-1/2".

What size is Continental 5-266?
It is commonly sold as approximately 24" x 16-1/2". Some OEM catalogs list the exact width as about 23-7/8".

What size is Continental 5-267?
It is commonly listed around 27-9/16" x 16-1/2", while some OEM catalogs round it to approximately 27-1/2" x 16-1/2".

Are 5-265, 5-266 and 5-267 interchangeable?
No. The widths differ, so each shelf should be matched to the original cabinet and manufacturer part number.

Are these epoxy-coated shelves?
Yes. Current parts catalogs identify these configurations as epoxy-coated wire shelving.

Can I choose the shelf using dimensions alone?
No. Match the manufacturer number, cabinet model, serial number, shelf-support spacing, and original shelf before ordering.

Why does my replacement shelf not sit level?
Possible causes include the wrong shelf size, bent shelf clips, incorrectly positioned supports, damaged pilaster rails, or an incorrect cabinet application.

How do I confirm which Continental shelf I need?
Match the original manufacturer part number whenever possible and verify the shelf dimensions, equipment model, serial number, support spacing, and cabinet position before ordering.

Continental Refrigerator Commercial Shelving

Continental Refrigerator wire shelving is designed for commercial refrigeration environments requiring organized interior storage and open airflow. Accurate manufacturer part-number, dimensional, and cabinet-support identification helps reduce incorrect orders and ensures the replacement shelf matches the intended equipment configuration.