Beverage-Air Top Lid Hinge Brackets – Left, Center & Right Options

Beverage-Air Top Lid Hinge Brackets – Left, Center & Right Options

This listing includes multiple Beverage-Air top lid hinge bracket options for compatible commercial refrigeration and prep-table equipment. Available selections include separate left, center, and right lid-hinge brackets, each with its own Beverage-Air manufacturer part number and equipment application.

These brackets support and locate the equipment lid so it can open, close, and remain aligned with the refrigerated top assembly. Correct hinge selection is important because the left, center, and right brackets perform different mounting functions and are not automatically interchangeable.

Select the exact manufacturer part number required for your equipment and verify the original lid, mounting arrangement, equipment model, serial number, and installed bracket before ordering.

Available Beverage-Air Hinge Bracket Options

• 28D16-009B – Left End Lid Hinge Bracket – Stainless Steel – DP/PT
• 03B03S006B – Center U-Shaped Lid Hinge Bracket / PT67 Hinge Bracket Assembly
• 28D16-008B – Right End Lid Hinge Bracket – Stainless Steel – DP/PT

Each option is sold according to the selected variant. Choose the position and manufacturer part number that matches the original equipment.

Product Details

• Manufacturer: Beverage-Air
• Part Type: Top Lid Hinge Bracket
• Available Positions: Left, Center, Right
• Left Manufacturer Part Number: 28D16-009B
• Center Manufacturer Part Number: 03B03S006B
• Right Manufacturer Part Number: 28D16-008B
• Left / Right Material: Stainless Steel
• Application: Commercial Refrigeration & Prep-Table Equipment
• Function: Lid support, pivoting, positioning, and alignment

28D16-009B – Left End Lid Hinge Bracket

The Beverage-Air 28D16-009B is the left end lid hinge bracket used on compatible Beverage-Air DP/PT refrigeration equipment. Beverage-Air identifies this version as a stainless steel left-end bracket.

The left bracket supports the applicable end of the lid assembly and should be matched to the original mounting position and lid configuration.

03B03S006B – Center Lid Hinge Bracket

The Beverage-Air 03B03S006B is a center U-shaped lid hinge bracket. Beverage-Air service documentation identifies this component as a hinge bracket assembly associated with PT67 equipment.

The center bracket performs a different role from the left and right end brackets and should not be substituted for an end hinge solely because the mounting hardware appears similar.

28D16-008B – Right End Lid Hinge Bracket

The Beverage-Air 28D16-008B is the right end lid hinge bracket for compatible Beverage-Air DP/PT applications. Beverage-Air identifies this version as a stainless steel right-end hinge bracket.

The right-side bracket should be matched to the original lid assembly, cabinet position, and equipment configuration before installation.

What These Lid Hinge Brackets Do

The hinge brackets create the mounting and pivot points used by the equipment's top lid assembly. Correctly positioned brackets allow the lid to move through its intended range while remaining aligned with the refrigerated top section.

Worn, bent, loose, or incorrectly installed brackets can affect lid movement and alignment and may place additional stress on the lid, mounting hardware, or surrounding cabinet components.

Common Signs a Lid Hinge Bracket May Need Replacement

• Lid sits unevenly when closed
• Lid binds while opening or closing
• Bracket is bent, cracked, or distorted
• Mounting holes are damaged or elongated
• Lid has excessive side-to-side movement
• Bracket no longer holds the lid in the intended position
• Mounting hardware repeatedly loosens
• Original bracket is missing
• Lid assembly has been damaged during cleaning or service

These symptoms do not automatically mean the hinge bracket is the only problem. Inspect the lid, mounting hardware, pivot points, top assembly, and surrounding cabinet structure before replacing components.

Why Correct Hinge Position Matters

The left, center, and right hinge brackets have different mounting positions and functions within the lid assembly. A bracket intended for one position should not be assumed to fit another position.

Always compare the original manufacturer part number and bracket orientation before ordering.

Technician Service Information

Before replacing a Beverage-Air lid hinge bracket, inspect the complete lid assembly and mounting area.

Check:

• Existing hinge bracket position
• Lid alignment
• Mounting screws and fasteners
• Cabinet mounting points
• Pivot and hinge hardware
• Lid for bending or distortion
• Clearance during full lid travel

After installation, operate the lid through its complete range of motion and verify smooth movement, proper alignment, secure mounting, and adequate clearance.

Before You Order

This is a multi-variant Beverage-Air lid-hinge listing. Select the exact position and manufacturer part number required for the equipment.

Verify the following:

• Beverage-Air manufacturer part number
• Left, center, or right position
• Equipment model number
• Equipment serial number
• Original bracket shape and orientation
• Mounting-hole configuration
• Lid assembly design
• Condition of mounting hardware

Do not select a hinge bracket based only on appearance. Similar commercial refrigeration brackets can have different mounting positions, dimensions, and equipment applications.

Frequently Asked Questions

What is Beverage-Air 28D16-009B?
Beverage-Air 28D16-009B is the stainless steel left end lid hinge bracket for compatible DP/PT refrigeration applications.

What is Beverage-Air 28D16-008B?
Beverage-Air 28D16-008B is the stainless steel right end lid hinge bracket for compatible DP/PT refrigeration applications.

What is Beverage-Air 03B03S006B?
03B03S006B is a center U-shaped lid hinge bracket / hinge bracket assembly associated with compatible Beverage-Air PT equipment.

Are the left and right brackets interchangeable?
No. The left and right brackets have separate Beverage-Air manufacturer numbers and should be installed in their specified positions.

Can I use the center bracket in place of an end hinge?
No. The center bracket has a different function and configuration from the left and right end brackets.

Are the end brackets stainless steel?
Yes. Beverage-Air identifies 28D16-008B and 28D16-009B as stainless steel DP/PT end hinge brackets.

Why is my prep-table lid sitting unevenly?
Possible causes include a bent hinge bracket, loose mounting hardware, lid distortion, damaged pivot components, or incorrect bracket alignment.

How do I confirm which Beverage-Air hinge bracket I need?
Match the manufacturer part number whenever possible and verify the left, center, or right position, equipment model, serial number, mounting pattern, and original lid assembly before ordering.

Beverage-Air Commercial Refrigeration Lid Hardware

These Beverage-Air hinge brackets are designed for commercial refrigeration lid assemblies requiring the specified left, center, or right mounting configuration. Accurate manufacturer part-number, position, equipment, and mounting identification helps reduce incorrect orders and supports proper lid operation.