Beverage-Air Evaporator Drain Pan – 4-1/4 Inch x 32-1/8 Inch | OEM Replacement for SUR Series Models

OEM Part Details

• Manufacturer: Beverage-Air
• OEM Number: 04B02S080B
• OEM Status: VERIFIED
• MPN: 04B02S080B
• SKU: 04B02S080B
• Part Type: Hinge

Product Overview

The Beverage-Air 04B02S080B hinge is an OEM door-hardware component for commercial refrigeration equipment. A properly operating hinge supports the door assembly at its mounting points, helps the door pivot smoothly, and contributes to consistent door alignment during daily use. Door alignment matters because a door that sags, binds, or closes unevenly can place added strain on related hardware and may prevent the gasket from seating as intended. This hinge is identified by Beverage-Air OEM number 04B02S080B, giving service professionals and equipment operators a clear reference when replacing the original component. It is a mechanical door component, so the most important ordering details are the original part number, mounting arrangement, door orientation, and physical comparison with the removed hinge. Reviewing those points before purchase helps avoid delays caused by ordering a hinge with a different mounting pattern or configuration. For commercial refrigeration service, door hardware deserves the same attention as other frequently used cabinet components. Replacing a worn or damaged hinge with the correct Beverage-Air OEM part can help restore stable door movement and support dependable daily cabinet access.

Product Function

The Beverage-Air 04B02S080B hinge provides a pivot point that allows a commercial refrigeration door to open and close while remaining supported at the door assembly. Its mechanical role is to help maintain the relationship between the door, cabinet mounting points, latch area, and gasket contact surface. When the hinge is worn, loose, bent, or damaged, the door may no longer travel or rest in its intended position. Correct hinge identification is important because mounting location, orientation, and hardware arrangement must correspond with the original component.

Why Choose a Genuine OEM Replacement?

Beverage-Air OEM part number 04B02S080B provides a dependable identification reference for this hinge. Matching the manufacturer part number to the original component helps service teams select the intended door-hardware part rather than relying on appearance alone. That is especially useful where similar hinges may differ in mounting pattern, orientation, or door position. Using the verified OEM number supports more confident ordering and helps reduce the risk of receiving the wrong mechanical component for the repair.

How This Part Works

A hinge works by joining the door assembly to the cabinet at designated mounting points and allowing controlled rotation as the door opens and closes. The hinge position helps establish where the door sits relative to the cabinet opening, gasket surface, latch, and any related closing hardware. In normal use, the hinge carries repeated movement and door weight, so looseness, wear, corrosion, bent hardware, or damaged mounting areas can affect door travel. A hinge concern should be evaluated alongside the door gasket, latch engagement, mounting screws or pins, and the condition of the door itself. Replacing the correct hinge can help return the door to a stable, properly supported operating position when the original component is the source of the problem.

Technician Service Tip

Before removing the original hinge, compare its mounting-hole layout, orientation, pivot arrangement, and door position with Beverage-Air part number 04B02S080B. Inspect the related mounting hardware and door gasket at the same time, since loose hardware or a worn gasket can also contribute to poor door closure.

Common Failure Symptoms

• A door that feels loose at the hinge area may indicate worn or loose hinge hardware.
• Door sagging or an uneven gap around the cabinet opening can indicate that the hinge and mounting points should be inspected.
• A door that rubs, binds, or drags during movement may indicate hinge alignment concerns.
• Difficulty getting the door to close in a consistent position can indicate a worn, bent, or damaged hinge.
• A gasket that does not contact the cabinet evenly may indicate that door alignment and hinge condition should be inspected.
• Visible corrosion, cracking, bending, or damage around the hinge may indicate that replacement is needed.
• Repeated loosening of hinge screws or pins can indicate wear at the hinge or mounting location.
• A latch that no longer lines up with its receiving point may indicate a door-position issue that should include hinge inspection.

Commercial Applications

This Beverage-Air hinge is intended for use in commercial refrigeration equipment where the verified OEM number, original component, and equipment identification support the repair. Commercial refrigeration service teams, restaurant kitchens, bars, foodservice operations, and facility maintenance personnel may encounter door-hardware wear from frequent opening and closing. Because equipment fitment has not been confirmed here, the part should not be selected by equipment category alone. Use the Beverage-Air OEM number 04B02S080B together with a careful comparison of the original hinge, door position, mounting arrangement, and equipment data plate information before ordering.

Before You Order

• Match Beverage-Air OEM part number 04B02S080B to the original component whenever possible.
• Compare the removed hinge with the product image and confirm that it is a hinge rather than another door component.
• Check the mounting-hole pattern and mounting-point arrangement on the original hinge.
• Confirm the hinge orientation and its position on the door assembly before ordering.
• Inspect the hinge pivot area for a comparable configuration and condition.
• Review the equipment model and serial number from the data plate.
• Compare the door alignment and hinge location with the original installation.
• Inspect hinge screws, pins, and related mounting hardware for wear or damage.
• Check the door gasket and latch area if the door has been closing unevenly.
• Confirm that the Beverage-Air 04B02S080B part number is appropriate for the equipment documentation available to you.

Related Components

• Door gasket: Inspect the gasket for uneven compression or gaps, since a misaligned door can prevent the gasket from seating evenly.
• Hinge screws or pins: Check related fasteners and pivot hardware for looseness, wear, corrosion, or damage that can affect hinge stability.
• Door latch: Inspect latch alignment when the door does not close consistently, as a shifted door position can affect latch engagement.
• Door closer: Evaluate related closing hardware where present, because it may be affected by or contribute to uneven door movement.

Frequently Asked Questions

What is Beverage-Air part number 04B02S080B?

Beverage-Air part number 04B02S080B is an OEM hinge identified for commercial refrigeration equipment door hardware.

What does a commercial refrigeration door hinge do?

A door hinge supports the door assembly at its mounting points and provides the pivot action needed for controlled opening and closing.

How can I confirm that this hinge is the correct part?

Match OEM number 04B02S080B to the original component and compare the hinge orientation, mounting-hole layout, pivot arrangement, and door position before ordering.

Can a worn hinge affect door gasket contact?

Yes. A loose, worn, or damaged hinge can affect door alignment, which may cause the gasket to contact the cabinet unevenly.

Should related door hardware be inspected when replacing this hinge?

Yes. Inspect the door gasket, hinge screws or pins, latch, and any related closing hardware for wear, looseness, damage, or alignment concerns.

Is equipment fitment confirmed for Beverage-Air hinge 04B02S080B?

Equipment fitment is not confirmed here. Verify the OEM number, compare the original hinge, and review the equipment model and serial number before ordering.