Bally 002990 Genuine OEM Evaporator Fan Motor 208-230V 0.50A CW 1550 RPM

Bally 002990 Genuine OEM Evaporator Fan Motor – 208-230V, 0.50A, CW, 1550 RPM

The Bally 002990 is a Genuine OEM evaporator fan motor designed for compatible Bally commercial refrigeration equipment. This motor is rated for 208-230 volts, draws approximately 0.50 amps, operates at 1550 RPM, and uses clockwise (CW) rotation.

The evaporator fan motor drives the fan blade that moves air across the evaporator coil and throughout the refrigerated space. Proper airflow is essential for maintaining consistent cabinet temperatures, transferring heat across the evaporator, and supporting normal refrigeration-system performance.

Use Bally OEM part number 002990 as the primary identifier when selecting this replacement. Always verify the existing motor label, voltage, rotation, mounting configuration, wiring, equipment model, and serial number before ordering.

Product Details

• Manufacturer: Bally Refrigerated Boxes
• OEM / MPN: 002990
• Part Type: Evaporator Fan Motor
• Classification: Genuine OEM
• Voltage: 208-230V
• Current: 0.50A
• Frequency: 50/60Hz
• Speed: 1550 RPM
• Rotation: Clockwise (CW)
• Application: Commercial Refrigeration Equipment
• Function: Evaporator airflow and air circulation

What the Bally 002990 Evaporator Fan Motor Does

The Bally 002990 powers the evaporator fan that circulates refrigerated air across the evaporator coil and throughout the conditioned space. As air moves across the cold evaporator surface, heat is transferred from the refrigerated area into the refrigeration system.

Consistent evaporator airflow helps maintain even temperatures and supports proper system operation. Reduced airflow can affect temperature recovery, evaporator performance, and overall refrigeration capacity.

Common Signs of an Evaporator Fan Motor Problem

• Evaporator fan does not run
• Fan starts intermittently or stops unexpectedly
• Motor runs slowly or struggles to start
• Unusual humming, grinding, or bearing noise
• Reduced airflow across the evaporator coil
• Uneven temperatures inside the refrigerated space
• Abnormal frost or ice buildup associated with poor airflow
• Motor becomes excessively hot during operation
• Motor winding or electrical failure confirmed during diagnosis

These symptoms do not automatically mean the fan motor has failed. Similar conditions can be caused by damaged fan blades, wiring problems, controls, relays, defrost-system issues, ice accumulation, or other refrigeration-system faults.

Why Evaporator Airflow Matters

The evaporator fan is responsible for moving air through the evaporator section and distributing cooled air through the refrigerated area. If airflow is reduced, the refrigeration system may have difficulty maintaining consistent temperature even when the compressor and other components are operating.

A correctly selected replacement motor must match the original electrical and mechanical configuration. Voltage alone is not enough to determine compatibility.

Technician Service Information

Before replacing the Bally 002990, disconnect electrical power and inspect the motor, fan blade, mounting assembly, wiring, terminals, and surrounding evaporator components.

Verify that the fan blade rotates freely and is not contacting the housing or evaporator assembly. Confirm the motor is receiving the correct supply voltage before condemning the motor.

After installation, verify correct clockwise rotation, unrestricted fan movement, proper airflow, and normal motor operation before returning the refrigeration equipment to service.

Before You Order

Confirm Bally OEM part number 002990 before ordering. Do not select a fan motor based only on appearance or voltage.

Verify the following against the original motor and equipment:

• Bally OEM / manufacturer part number 002990
• 208-230V electrical rating
• 0.50A current rating
• 50/60Hz frequency
• 1550 RPM motor speed
• Clockwise rotation
• Mounting configuration
• Shaft and fan-blade configuration
• Wiring and terminal arrangement
• Equipment model number
• Equipment serial number

If the original part number cannot be confirmed, provide the Bally model number, serial number, motor-label information, and clear photos of the existing motor before ordering.

Frequently Asked Questions

What is Bally part number 002990?
Bally 002990 is a Genuine OEM evaporator fan motor designed for compatible Bally commercial refrigeration equipment.

What voltage is the Bally 002990 motor?
The motor is rated for 208-230V operation.

How many amps does Bally 002990 draw?
The motor is listed at approximately 0.50 amps.

What speed is the Bally 002990 fan motor?
The motor is rated at approximately 1550 RPM.

What rotation is Bally 002990?
The 002990 is specified with clockwise (CW) rotation.

Is Bally 002990 an evaporator or condenser fan motor?
Bally 002990 is identified as an evaporator fan motor.

Can a bad evaporator fan motor cause poor cooling?
Yes. A fan motor that stops or runs improperly can reduce airflow across the evaporator coil and contribute to uneven cabinet temperatures or reduced cooling performance.

How do I confirm Bally 002990 fits my equipment?
Match OEM part number 002990 whenever possible and verify the voltage, amperage, frequency, RPM, rotation, mounting arrangement, wiring, equipment model, and serial number before ordering.

Ordering Bally Refrigeration Parts

PartsDirectOnline supplies commercial refrigeration replacement parts for service technicians, restaurants, supermarkets, maintenance departments, and foodservice facilities. Using the correct Bally OEM number 002990 together with the equipment model and serial number helps improve replacement-part identification and reduce ordering errors.