Avantco Digital Temperature Control – OEM Controller with Probe & Display

OEM Part Details

• OEM Number: 17815350
• OEM Status: VERIFIED
• MPN: 17815350
• SKU: 17815350
• Part Type: Temperature Control

Product Overview

OEM Part Details: OEM number 17815350. MPN: 17815350. SKU: 17815350. OEM Status: VERIFIED. OEM 17815350 is a digital temperature control for commercial cooking equipment. This electronic controller includes a probe and display arrangement and serves as a key part of the equipment’s temperature-control system. By receiving temperature information from the sensing probe and presenting control information at the display, it supports temperature-related control response during normal foodservice equipment operation. Accurate control response matters because the controller is part of the electrical path that interprets probe input and communicates through the display-equipped control assembly. When the original component has been diagnosed as the source of a problem, OEM 17815350 provides a reliable part-number reference for replacement. Its probe, display arrangement, connectors, terminals, and mounting configuration should be compared carefully with the removed component before service. A temperature-control concern can resemble a sensor, harness, relay, contactor, display, or connector issue. Careful electrical diagnosis helps identify whether the controller requires replacement or whether another related component needs attention. Matching OEM number 17815350 to the original part helps reduce wrong-part orders, particularly where similar-looking controls may use different probe arrangements or connector layouts. This OEM controller is intended for commercial equipment service where correct identification, protected handling, and a thorough review of the related control circuit support dependable repair decisions.

Product Function

This digital temperature control monitors input from its associated temperature probe and uses that information within the equipment control circuit. Its display provides a visible control interface, while the controller responds to sensed temperature conditions as part of the equipment’s electronic control operation. When the original control has been properly diagnosed as faulty, replacing it with OEM 17815350 helps restore the intended controller identity within the system. Because this is an electrical control component, related wiring, connectors, probe condition, display response, and switched components should be evaluated during qualified commercial equipment service.

Why Choose a Genuine OEM Replacement?

OEM 17815350 provides a reliable part-number reference when replacing the original digital temperature control. Matching the manufacturer part number helps distinguish this controller from controls that may look similar but use different connector layouts, probe arrangements, display configurations, or control logic. Using the verified OEM number supports more confident ordering and helps technicians compare the removed component directly with the replacement before service. Confirming the original part number, equipment data plate, and physical component details remains an important step when model-specific fitment documentation is not available.

How This Part Works

The temperature probe supplies temperature information to the digital control. The controller interprets that input as part of the equipment’s electronic control circuit and provides a display-based interface for temperature-related control response. Depending on the equipment design, the control circuit may communicate with related wiring, relays, contactors, sensors, or display components. A problem anywhere in that related path can produce symptoms that appear to involve the controller. For that reason, a qualified technician should evaluate the controller in context rather than relying on one symptom alone. Connector condition, harness damage, probe placement, display operation, and related switched components can all affect control response. OEM number 17815350 should be matched to the original component before replacement, with attention to the display, probe, terminals, connector arrangement, and mounting configuration.

Technician Service Tip

Before replacing a temperature control, compare OEM number 17815350 with the removed component and inspect the probe, connector positions, harness condition, display arrangement, and mounting points. Qualified personnel should diagnose related electrical components before identifying the controller as the source of a control issue.

Common Failure Symptoms

• An unresponsive or inconsistent display may indicate that the temperature control or its related electrical connections should be inspected.
• Temperature-related control response that does not follow normal equipment operation can indicate a controller, probe, harness, or related control-circuit concern.
• Intermittent control behavior may indicate loose, damaged, or poorly seated connectors associated with the controller.
• A visible display that does not respond as expected may indicate that the control assembly and its related wiring require diagnosis.
• Temperature readings that appear inconsistent may indicate that the sensing probe and the temperature control should be evaluated together.
• Control operation that cycles irregularly may indicate a concern in the controller, sensing circuit, relay, contactor, or associated wiring.
• Damaged terminals, connectors, or controller housing should be inspected because physical damage can affect electrical connections.
• A control issue following equipment service may indicate that connector placement, probe routing, or component identification should be confirmed.
• Failure of an equipment function governed by the temperature-control circuit may indicate that the controller and related switched components require qualified diagnosis.

Commercial Applications

This OEM digital temperature control is identified for commercial cooking equipment and is suited to foodservice maintenance and commercial kitchen repair applications where a temperature-related electronic control is required. It is appropriate for service work involving equipment control circuits, display-equipped controls, temperature probes, related harnesses, and switched electrical components. Because verified model fitment is not supplied, this part should not be assigned to a specific oven, fryer, range, warmer, or other equipment type without confirming the equipment model and serial number against applicable service documentation. Careful part-number matching is especially important when multiple controls have similar displays or connector layouts.

Before You Order

• Match OEM number 17815350 to the number on the original component whenever it is legible.
• Compare the removed temperature control with the product image, including the display arrangement and overall controller configuration.
• Confirm the equipment model and serial number from the equipment data plate against applicable service documentation.
• Compare the temperature probe arrangement and routing with the original component.
• Inspect connector positions, terminal layout, and harness connections before ordering.
• Check mounting points and physical orientation against the removed control.
• Confirm that the original component is a digital temperature control rather than a separate sensor, relay, contactor, or display component.
• Have qualified personnel diagnose the control circuit so related wiring, probe, display, and switched components are not mistaken for a failed controller.
• Compare the OEM number, MPN, and SKU: 17815350.

Related Components

• Temperature probe: Inspect the probe and its connection because inaccurate or interrupted sensing input can resemble a controller concern.
• Wiring harness: Check harness routing, connector seating, and visible damage because the controller depends on reliable electrical connections.
• Display or keypad assembly: Evaluate the display interface when display response is inconsistent, since the visible control interface may require separate attention.
• Relay or contactor: Inspect related switched components because a control-response issue may originate outside the temperature control itself.

Frequently Asked Questions

What is OEM 17815350?

OEM 17815350 is a digital temperature control with a probe and display arrangement for commercial cooking equipment.

How do I confirm that OEM 17815350 is the correct temperature control?

Match OEM number 17815350 to the original component, then compare the display, probe arrangement, connectors, terminals, mounting points, and equipment data plate information.

Does a temperature-control problem always mean the controller has failed?

No. A control concern may also involve the temperature probe, wiring harness, connectors, display assembly, relay, contactor, or another part of the control circuit. Qualified diagnosis is recommended.

What should be inspected with this digital temperature control?

Inspect the associated temperature probe, wiring harness, connector condition, display or keypad assembly, and related relay or contactor as applicable to the equipment.

Is model-specific fitment available for OEM 17815350?

Verified model-specific fitment is not supplied. Confirm the equipment model and serial number against applicable service documentation and compare the original component before ordering.

Why is the probe arrangement important when ordering a temperature control?

The controller relies on temperature input from its associated probe. Comparing the probe arrangement and routing with the original component helps avoid selecting a control with different sensing details.