Glastender Clear Fan Guard – 8 Inch x 7 Inch x 1 Inch OEM Replacement

OEM Part Details

• Manufacturer: Glastender
• OEM Number: 06001383
• OEM Status: VERIFIED
• MPN: 06001383
• SKU: PD-758-076
• Part Type: Hinge

Product Overview

The Glastender 06001383 hinge is a genuine OEM door-hardware component identified by Glastender manufacturer part number 06001383. A hinge supports controlled door movement while helping the door assembly maintain its intended position through repeated opening and closing. In commercial equipment service, sound door hardware matters because loose, worn, bent, or incorrectly matched hardware can affect door alignment, closure, and daily usability. This replacement hinge gives service professionals a reliable way to identify the correct Glastender component by its original manufacturer number rather than relying only on appearance. Proper door movement also helps reduce strain on related hardware, including the latch, closer, mounting fasteners, and gasket contact area. Before ordering, compare the removed component carefully with the product information, including its mounting arrangement, orientation, pivot location, and connection points. Inspecting the related door hardware at the same time can help identify conditions that may have contributed to uneven movement or poor door alignment. Use this OEM hinge when the documented Glastender parts information for the equipment calls for part number 06001383.

Product Function

This Glastender hinge provides a mechanical pivot point for the associated door assembly. Its job is to support the door, allow repeatable opening and closing movement, and help keep the door positioned correctly relative to its frame and related hardware. Because hinges carry the door load and experience repeated movement, wear, looseness, damage, or incorrect mounting can affect how the door operates. Matching the genuine OEM part number helps technicians identify the intended replacement component for the documented application and reduce the risk of selecting a similar-looking hinge with a different mounting arrangement or orientation.

Why Choose a Genuine OEM Replacement?

Genuine OEM identification is especially useful for door hardware because small differences in hinge construction, mounting points, orientation, and door relationship can lead to an incorrect order. Glastender part number 06001383 provides a specific manufacturer reference for comparing the replacement with the original component and the applicable equipment documentation. Using the verified OEM number supports more confident ordering and helps reduce avoidable door-hardware mismatches.

How This Part Works

A hinge joins a movable door assembly to its fixed mounting surface and creates the pivot path used during opening and closing. When the door moves, the hinge hardware carries and guides that movement while the mounting points hold the assembly in position. Proper hinge condition and secure mounting help the door travel smoothly and return to its intended alignment. If a hinge becomes worn, bent, loose, damaged, or mismatched, the door may sit unevenly, move poorly, or place added strain on nearby hardware. The Glastender 06001383 hinge should be compared with the removed component and applicable equipment documentation before installation. Related door components, including the gasket, latch, closer, and mounting hardware, should also be inspected because their condition can influence overall door operation.

Technician Service Tip

Before replacing door hardware, compare the original hinge and the replacement for orientation, mounting-hole arrangement, pivot location, and visible wear. Inspect hinge screws or pins, the door gasket, latch engagement, and door alignment so related conditions are addressed during service.

Common Failure Symptoms

• A door that sags or sits unevenly may indicate hinge wear, damage, or loose mounting hardware.
• Difficulty opening or closing the door can indicate a hinge or related door-hardware condition that should be inspected.
• A door that rubs against its frame may indicate misalignment associated with the hinge mounting or nearby hardware.
• Visible play at the door pivot can indicate worn hinge components or loose fasteners.
• A door that does not remain in its intended position may indicate a hinge, closer, or mounting issue.
• Unusual movement, binding, or resistance during door travel may indicate hinge damage or misalignment.
• Cracked, bent, corroded, or visibly damaged hinge hardware should be inspected for replacement.
• Repeated loosening of hinge fasteners can indicate wear at the mounting area or an alignment condition requiring attention.

Commercial Applications

This Glastender OEM hinge is intended for commercial equipment service where the applicable equipment documentation identifies manufacturer part number 06001383. Door hardware is commonly inspected during restaurant service, foodservice maintenance, and commercial kitchen repair when a door has become difficult to operate, appears misaligned, or shows visible hardware wear. Equipment fitment is not established by appearance alone. Confirm the equipment data plate, manufacturer documentation, original component, hinge orientation, and mounting arrangement before ordering. A correct hinge selection helps service personnel address the door assembly with the proper identified Glastender component.

Before You Order

• Match Glastender OEM part number 06001383 to applicable equipment documentation.
• Compare the removed hinge with the replacement product information before ordering.
• Confirm the manufacturer name is Glastender.
• Verify the equipment model and serial number against available manufacturer parts information.
• Check the hinge orientation and pivot location on the original component.
• Compare the mounting-hole arrangement and mounting points.
• Inspect the existing hinge screws, pins, and mounting area for wear or damage.
• Check door alignment, latch operation, closer operation, and gasket condition for related issues.

Related Components

• Door gasket: Inspect the gasket because door alignment and closure can affect how evenly it contacts the mating surface.
• Hinge screws or pins: Check fasteners and pivot hardware for looseness, wear, damage, or missing components that can affect hinge stability.
• Door latch: Inspect latch engagement because a misaligned door or worn hinge can affect how the latch meets its strike point.
• Door closer: Evaluate the closer where present because hinge alignment and closer operation both influence door movement and closing behavior.

Frequently Asked Questions

What is Glastender part number 06001383?

Glastender part number 06001383 is identified as a genuine OEM hinge.

How do I confirm this is the correct Glastender hinge?

Match OEM number 06001383 to applicable manufacturer documentation, then compare the original hinge's orientation, mounting arrangement, and pivot location.

Can a worn hinge affect door alignment?

Yes. Hinge wear, damage, loose mounting hardware, or an incorrect hinge arrangement may contribute to a door sitting unevenly or moving poorly.

What should be inspected with a replacement hinge?

Inspect the hinge screws or pins, mounting area, door gasket, latch, closer, and overall door alignment for related wear or damage.

Should I order a hinge based only on its appearance?

No. Similar-looking hinges can differ in orientation, mounting points, and pivot location. Use the verified Glastender OEM number and compare the original component before ordering.