Frymaster 8073628 OEM Propane Gas Valve

Frymaster 8073628 OEM Propane Gas Valve for Commercial Fryers

The Frymaster 8073628 Propane Gas Valve is an OEM gas-control component designed for compatible Frymaster commercial cooking equipment operating on propane/LP gas. Installed within the equipment's gas train, this valve controls propane gas flow to the burner system as required by the fryer's heating and safety controls.

Reliable gas-valve operation is essential for proper ignition, burner performance, temperature recovery, and dependable commercial fryer operation. A valve that fails to open, close, or respond correctly can contribute to no-heat conditions, intermittent burner operation, slow recovery, or ignition problems. When proper diagnosis confirms valve failure, replacing the original component with the correct Frymaster OEM 8073628 helps restore the gas-control configuration intended for compatible equipment.

OEM Part Details

• Manufacturer: Frymaster
• OEM Part Number: 8073628
• Part Type: Propane / LP Gas Valve
• Fuel Type: Propane / LP Gas
• Application: Commercial Cooking Gas Control
• Equipment Type: Commercial Fryers and Compatible Frymaster Cooking Equipment

What the Frymaster 8073628 Propane Gas Valve Does

The Frymaster 8073628 gas valve is part of the equipment's gas-control system. It works with the ignition, temperature-control, and safety circuits to control propane gas flow to the burner system when the equipment calls for heat and the required safety conditions are satisfied.

Proper gas-valve operation supports:

• Controlled propane gas flow
• Reliable burner ignition
• Consistent burner operation
• Proper heat production
• Normal temperature recovery
• Proper response to a call for heat
• Controlled gas shutoff
• Dependable commercial cooking performance

Compatible Frymaster Models

The Frymaster 8073628 OEM Propane Gas Valve is listed for compatible Frymaster commercial cooking equipment including:

• 3FQG120
• BID80
• CFHDC
• FGP55
• FPD565
• FPD65
• FPD665
• FPHDC
• FQG80T
• HD150
• HD150G
• HD1814G
• HD260
• HD50GC
• HD60
• KSCF18G
• SCFHD160
• SCFHD260
• SCFHD360
• SCFHD456
• SCFHD460
• SCFHD460GN
• SCFHD63
• SCFHDC
• YFG255
• YSCFH214GCNS
• YSCFH314GNC
• x1814xx

Compatibility Note: Frymaster equipment can vary by serial number, production date, gas configuration, and factory revision. Always verify OEM part number 8073628, the complete equipment model and serial number, propane/LP fuel configuration, and the original valve before ordering.

Common Signs of a Gas Valve or Gas-Control Problem

Qualified commercial cooking-equipment technicians may inspect the Frymaster 8073628 when troubleshooting conditions such as:

• Equipment will not heat
• Burners fail to ignite
• Gas valve does not open during a call for heat
• Intermittent burner operation
• Burners shut down unexpectedly
• Slow temperature recovery
• Inconsistent heating
• Gas-control circuit does not respond as expected
• Proper control signal is present, but the valve does not respond
• Visible damage to the gas valve
• Loose or damaged electrical connections
• Overheated or corroded terminals

These symptoms do not automatically confirm gas-valve failure. Ignition controls, flame-sensing components, temperature controls, high-limit devices, wiring, propane supply, gas pressure, burners, and other safety components can produce similar symptoms. The complete gas and ignition system should be diagnosed before replacing the valve.

Propane / LP vs. Natural Gas

This listing is specifically for a propane/LP gas valve. Propane and natural-gas equipment can require different valves, regulator configurations, gas pressures, or related components.

Do not substitute a natural-gas valve for this propane valve based solely on physical appearance. The correct fuel type and OEM part number must be verified before installation.

Technician Checks Before Ordering

Before replacing the Frymaster 8073628 propane gas valve, qualified technicians should verify:

• OEM part number 8073628
• Complete equipment model
• Equipment serial number
• Propane / LP fuel configuration
• Original gas-valve identification
• Gas inlet and outlet arrangement
• Valve mounting orientation
• Electrical connections
• Required control voltage
• Gas supply condition
• Gas pressure
• Ignition-system operation
• Flame-sensing system where applicable
• Temperature-control operation
• High-limit and safety-control operation
• Burner condition

OEM part-number and fuel-type verification are especially important when selecting a replacement gas valve. Similar-looking gas valves are not necessarily interchangeable.

Diagnosing a No-Heat Condition

A fryer or commercial cooking appliance that will not heat does not automatically have a failed gas valve. Before condemning the 8073628, technicians should confirm that the valve is receiving the proper command and that all required safety conditions are satisfied.

Depending on the equipment configuration, diagnosis may include checking:

• Propane supply
• Required gas pressure
• Electrical supply
• Ignition control
• Temperature control
• High-limit safety circuit
• Flame-sensing components
• Valve control signal
• Wiring and connectors
• Burner and ignition components

This diagnostic approach helps prevent replacement of a functioning gas valve when another component is responsible for the equipment failure.

Commercial Cooking Applications

Compatible Frymaster equipment using this type of propane gas-control component is commonly installed in demanding foodservice environments including:

• Restaurants
• Fast-food restaurants
• Hotels
• Schools
• Hospitals
• Universities
• Institutional kitchens
• Corporate cafeterias
• Catering operations
• High-volume commercial kitchens

Installation & Service Notes

Gas-control components should be serviced only by qualified commercial cooking-equipment technicians. Shut off the propane supply and electrical power and follow Frymaster service procedures before beginning work.

Before removing the original valve, document its orientation, gas connections, electrical connections, and relationship to other gas-train components. Compare the replacement valve with the original component before installation.

After installation, gas connections must be checked for leaks using approved professional service procedures. The equipment should then be operated through an appropriate heating cycle to verify ignition, burner operation, temperature control, gas shutoff, and applicable safety functions.

Never operate commercial gas equipment with a known gas leak, bypassed safety control, incorrect fuel configuration, or improperly installed gas valve.

Why Correct OEM Gas Valve Identification Matters

Commercial cooking gas valves can appear nearly identical while having different fuel applications, gas-pressure requirements, electrical characteristics, connection arrangements, regulator configurations, and operating specifications.

Using Frymaster OEM part number 8073628 as the primary identifier helps technicians and purchasing departments select the correct propane gas valve instead of relying solely on physical appearance.

Always verify the complete model, serial number, fuel type, and original valve before ordering.

Frequently Asked Questions

What is the Frymaster 8073628?

The Frymaster 8073628 is an OEM propane/LP gas valve used within the gas-control system of compatible Frymaster commercial cooking equipment.

What fuel type is Frymaster 8073628 designed for?

This listing is for a propane/LP gas valve. Confirm the equipment fuel type before ordering or installation.

Which Frymaster models use the 8073628 propane gas valve?

The 8073628 is listed for compatible 3FQG120, BID80, CFHDC, FGP55, FPD565, FPD65, FPD665, FPHDC, FQG80T, HD150, HD150G, HD1814G, HD260, HD50GC, HD60, KSCF18G, SCFHD160, SCFHD260, SCFHD360, SCFHD456, SCFHD460, SCFHD460GN, SCFHD63, SCFHDC, YFG255, YSCFH214GCNS, YSCFH314GNC, and x1814xx equipment.

Does Frymaster 8073628 fit HD-series equipment?

It is listed for compatible HD150, HD150G, HD1814G, HD260, HD50GC, and HD60 applications. Verify the complete model, serial number, and propane configuration before ordering.

Does Frymaster 8073628 fit SCFHD equipment?

It is listed for multiple compatible SCFHD configurations, including SCFHD160, SCFHD260, SCFHD360, SCFHD456, SCFHD460, SCFHD460GN, SCFHD63, and SCFHDC.

Can a bad 8073628 gas valve cause a no-heat condition?

Yes. A valve that fails to open can prevent burner operation. However, ignition controls, safety devices, wiring, gas supply, and other components can create the same symptom.

Can a failing gas valve cause intermittent heating?

A malfunctioning valve or related control circuit can contribute to intermittent burner operation. The complete ignition and gas-control system should be tested before replacing the valve.

Can I replace this propane valve with a natural-gas valve?

No direct substitution should be made based solely on appearance. Use the correct OEM valve and fuel configuration specified for the equipment.

What should I check before replacing the gas valve?

Verify propane supply, gas pressure, ignition operation, safety controls, temperature controls, valve control signal, wiring, burners, model and serial number, and the OEM number on the original valve.

How do I confirm Frymaster 8073628 is the correct replacement?

Verify OEM part number 8073628, the complete equipment model and serial number, propane/LP fuel configuration, and identification on the original gas valve before ordering.

Should the equipment be leak-tested after installation?

Yes. All disturbed gas connections must be checked for leaks using approved professional service procedures before the equipment is returned to operation.

Is professional installation recommended?

Yes. Commercial propane gas valves should be diagnosed and installed by qualified commercial cooking-equipment service personnel trained to work with gas systems and safety controls.

Why Buy From Parts Direct Online?

Parts Direct Online supplies OEM commercial cooking and commercial refrigeration replacement parts for service technicians, contractors, restaurants, schools, hospitals, institutional kitchens, and foodservice facilities throughout the United States. Our focus is helping commercial equipment professionals identify the correct OEM replacement component and minimize costly equipment downtime.