Glastender Undercounter Refrigerator Pull Handle | Chrome OEM

OEM Part Details

• Manufacturer: Glastender
• OEM Number: 06001462
• OEM Status: VERIFIED
• MPN: 06001462
• SKU: PD-758-015
• Part Type: Hinge

Product Overview

The Glastender 06001462 hinge is an OEM door-hardware component used in commercial refrigeration equipment. A properly operating hinge supports the door assembly, helps maintain its intended position, and allows the door to open and close with controlled movement. That mechanical support matters because door alignment affects how the door meets the cabinet opening and how related sealing and latching components perform during normal service. Wear, looseness, physical damage, or incorrect hinge selection can contribute to difficult door movement and poor door alignment. Replacing a worn or damaged hinge with the correct Glastender manufacturer part number helps technicians and operators restore a dependable door assembly without relying on unverified fitment assumptions. This OEM hinge should be identified by part number 06001462 and compared carefully with the removed component before ordering. For commercial refrigeration service, door hardware deserves the same attention as other cabinet components. A door that moves smoothly and aligns correctly can help reduce unnecessary strain on related hardware and supports routine equipment operation. Confirming the original component, mounting arrangement, and equipment data plate before purchase is the best way to reduce a wrong-part order.

Product Function

This Glastender door hinge provides mechanical support and pivot movement for a commercial refrigeration door assembly. Its role is to hold the door in its intended relationship to the cabinet while allowing repeated opening and closing. Correct hinge condition helps the door remain aligned with related components such as the gasket, latch, and closer. A hinge is not a temperature-control component, but its condition can influence the practical operation of the door assembly. Loose, worn, bent, or damaged hardware may allow the door to sit unevenly, move with resistance, or fail to close as intended. Using OEM part number 06001462 helps identify the correct Glastender hinge for service planning and replacement.

Why Choose a Genuine OEM Replacement?

Genuine Glastender OEM part number 06001462 provides a reliable identification point when replacing the original hinge. Matching the manufacturer part number and comparing the removed component helps reduce uncertainty during commercial equipment service. OEM identification is especially useful for door hardware because mounting arrangement, orientation, and door relationship should be confirmed before a replacement is selected.

How This Part Works

A door hinge forms the mechanical pivot between the door assembly and its mounting location. As the door is opened, the hinge guides movement around its pivot point; as the door closes, it helps return the door to its intended alignment at the cabinet opening. The hinge works together with the door’s mounting hardware, gasket, latch, and any applicable closer to support controlled operation. Because a commercial refrigeration door is opened repeatedly during normal use, hinge condition should be considered whenever the door appears loose, uneven, difficult to move, or unable to close consistently. A hinge problem may be limited to the component itself, but mounting hardware, door position, and related door hardware should also be inspected. The Glastender 06001462 hinge is identified by its OEM number for accurate replacement selection. Confirming the original part and its installed orientation before service helps ensure the replacement is appropriate for the equipment.

Technician Service Tip

Before replacing the hinge, compare the removed component with OEM number 06001462 and inspect the mounting points, hinge hardware, door position, gasket contact, latch operation, and any door closer involved in the assembly.

Common Failure Symptoms

• A door that feels loose during opening or closing may indicate hinge wear or loose mounting hardware.
• Uneven door position at the cabinet opening can indicate that the hinge and mounting points should be inspected.
• A door that rubs, binds, or moves with resistance may indicate a damaged or misaligned hinge assembly.
• Visible bending, cracking, corrosion, or physical damage can indicate that hinge replacement should be considered.
• A door that does not remain in its intended position may indicate wear in the hinge or related door hardware.
• Uneven gasket contact around the door opening may indicate that door alignment and hinge condition should be evaluated.
• Latch engagement that becomes inconsistent can indicate a door-position issue involving the hinge, latch, or strike relationship.
• Recurring loosening of door hardware may indicate that the hinge mounting area and related fasteners need inspection.

Commercial Applications

This Glastender OEM hinge is intended for commercial refrigeration door-hardware service where OEM part number 06001462 is confirmed as the correct replacement. It is relevant to restaurant operations, bar service areas, foodservice maintenance teams, and commercial refrigeration service providers that maintain equipment with frequently used door assemblies. Door hardware service should focus on the complete mechanical relationship between the hinge, door, gasket, latch, mounting points, and cabinet opening. Equipment model and serial number should be confirmed against the data plate when fitment documentation is needed. No specific model compatibility is stated here.

Before You Order

• Match Glastender OEM part number 06001462 to the original component or approved equipment documentation.
• Confirm that the replacement part is identified as a hinge, not another door-hardware component.
• Compare the removed component with available product imagery before ordering.
• Inspect the hinge mounting points and compare their arrangement with the original component.
• Confirm the installed hinge orientation and its relationship to the door assembly.
• Review the equipment data plate for the model and serial number when fitment confirmation is needed.
• Inspect the door gasket for uneven contact that may be related to door alignment.
• Check the latch, strike, and any door closer for wear or adjustment concerns before replacing only the hinge.
• Use SKU PD-758-015 as an additional PartsDirectOnline ordering reference.

Related Components

• Door gasket: Inspect the gasket for uneven compression or gaps that may result when door alignment is affected by hinge condition.
• Hinge screws or pins: Check related hinge hardware for looseness, wear, damage, or missing pieces before installing a replacement hinge.
• Door latch: Inspect latch engagement because an uneven door position can affect how the latch meets its mating hardware.
• Door closer: Evaluate the closer, where applicable, because it works with the hinge to guide door movement and closing action.

Frequently Asked Questions

What is Glastender part number 06001462?

Glastender part number 06001462 is an OEM hinge used as door hardware in commercial refrigeration equipment.

What does a commercial refrigeration door hinge do?

A door hinge supports the door assembly and provides the pivot movement needed for normal opening and closing while helping maintain door alignment.

Should I replace the hinge if the door is difficult to close?

Difficult closing may indicate a hinge concern, but the gasket, mounting hardware, latch, strike, door position, and any applicable closer should also be inspected.

How do I confirm this is the correct Glastender hinge?

Match OEM part number 06001462 to the original component or approved equipment documentation, then compare the installed orientation and mounting arrangement.

Does this listing confirm equipment model compatibility?

No specific equipment model compatibility is stated. Confirm the equipment model and serial number against the data plate when fitment documentation is needed.

Why should the door gasket be inspected when replacing a hinge?

A worn or misaligned hinge can affect the door’s position at the cabinet opening. Inspecting gasket contact helps identify related door-alignment concerns.