Kason 11268000014 OEM 1268 Spring-Assisted Cam-Rise Hinge

Kason 11268000014 OEM 1268 Spring-Assisted Cam-Rise Hinge

The Kason 11268000014 1268 Series Spring-Assisted Hinge is a commercial refrigeration door hinge designed for compatible reach-in refrigerator, freezer, and foodservice equipment doors. The 1268 is the spring-assisted version of Kason's 1267 cam-rise hinge design and provides additional closing force while supporting proper door alignment and gasket compression.

This hinge uses Kason's cam-rise door movement combined with spring assistance to help the door return toward the closed position. Correct hinge operation is important because a sagging, worn, loose, or incorrectly selected hinge can contribute to poor door closure, uneven gasket sealing, latch misalignment, air leakage, frost buildup, and unstable refrigeration performance.

When inspection confirms hinge replacement is required, use Kason manufacturer part number 11268000014 as the primary replacement reference and compare the original hinge, mounting pattern, adjustment range, door orientation, and equipment configuration before ordering.

OEM Part Details & Specifications

• Manufacturer: Kason Industries
• Manufacturer Part Number: 11268000014
• Series: 1268
• Part Type: Spring-Assisted Cam-Rise Door Hinge
• Adjustment / Offset Range: 1-5/8" to 2-3/8"
• Finish: Polished Chrome
• Material: High-Pressure Die-Cast Zinc Components with Brass Cover
• Cam: Self-Lubricating Cam Design
• Mounting: Countersunk for No. 12 Flat-Head Screws
• Application: Commercial Refrigeration / Reach-In Equipment Doors
• Function: Door Support, Cam-Rise Movement & Spring-Assisted Closing

What the Kason 1268 Hinge Does

The Kason 1268 supports the refrigeration door at its pivot point while allowing controlled opening and closing. Its cam-rise geometry raises the door during opening and allows it to settle back toward the closed position as the hinge rotates.

The added spring mechanism provides additional closing force compared with the standard 1267 hinge.

Proper hinge operation helps support:

• Smooth refrigeration door movement
• Spring-assisted closing
• Proper door alignment
• Consistent gasket compression
• Reduced gasket drag and wear
• Reliable latch engagement
• Reduced refrigerated-air leakage
• Dependable commercial refrigeration operation

1-5/8" to 2-3/8" Adjustment Range

Published Kason documentation identifies the related 1267/1268 hinge geometry with an adjustment range of approximately 1-5/8" to 2-3/8". This adjustment helps compensate for door position and gasket compression.

Before ordering, compare the removed hinge and door assembly for:

• Door-to-cabinet relationship
• Original hinge adjustment
• Mounting-hole locations
• Door thickness and construction
• Gasket compression
• Hinge orientation

Spring-Assisted Closing

The 1268 is specifically designed as the spring-assisted version of Kason's 1267 cam-rise hinge. The spring provides additional closing force for applications where stronger door-closing assistance is required.

This makes the 1268 different from a standard cam-rise hinge even when the overall hinge shape appears similar.

Cam-Rise Operation

The hinge uses cam-rise action to control door movement. As the door opens, the hinge raises the door slightly. As the door closes, the cam allows the door to settle toward the cabinet opening.

This helps:

• Reduce gasket drag
• Promote consistent door sealing
• Improve closing action
• Reduce unnecessary gasket wear
• Support reliable refrigeration performance

Polished Chrome Construction

Kason specifies a polished chrome finish for this hinge family. The hinge body uses heavy-duty die-cast components designed for repeated commercial door operation.

Finish alone does not establish fitment. Similar Kason hinges are available with different spring, detent, offset, and adjustment configurations.

Common Signs of a Worn or Damaged Hinge

• Door sags at the latch side
• Door does not close squarely
• Door requires unusual force to close
• Spring-assisted closing becomes weak
• Hinge binds during movement
• Cam action becomes rough
• Gasket compression becomes uneven
• Latch and strike no longer align
• Door contacts surrounding cabinet components
• Mounting hardware repeatedly loosens
• Hinge body or strap is physically damaged
• Condensation or frost forms around the door opening

These symptoms do not automatically confirm hinge failure. Gaskets, latches, door closers, mounting surfaces, cabinet alignment, and other hinges should also be inspected.

Inspect the Door Gasket

Door alignment directly affects gasket sealing. When servicing the Kason 1268 hinge, inspect the gasket for:

• Tears
• Flattened sections
• Uneven compression
• Visible gaps
• Permanent distortion
• Frost or condensation around the opening

A new hinge cannot correct poor sealing when the gasket itself is damaged.

Inspect the Latch & Strike

A sagging refrigeration door can move the latch out of alignment with its strike. Verify proper hinge alignment before adjusting or replacing latch hardware.

Check for:

• Latch binding
• Strike misalignment
• Loose mounting hardware
• Door requiring excessive force to latch

Inspect Other Hinges & Mounting Points

If the equipment uses more than one hinge, inspect the complete hinge system.

Check for:

• Loose fasteners
• Damaged mounting holes
• Bent straps
• Cam wear
• Corrosion
• Uneven hinge loading
• Frame or door damage

Technician Checks Before Ordering

Before ordering Kason 11268000014, verify:

• Manufacturer part number 11268000014
• Kason 1268 Series
• Spring-assisted configuration
• 1-5/8" to 2-3/8" adjustment / offset requirement
• Original mounting-hole pattern
• Door orientation
• Door-to-cabinet relationship
• Original hinge dimensions
• Gasket compression
• Condition of related door hardware

Do not select a commercial refrigeration hinge by appearance alone. Kason manufactures multiple cam-rise and spring-assisted hinges with similar housings but different adjustment ranges, spring arrangements, detents, and applications.

1267 vs. 1268 Kason Hinge

• Kason 1267: Standard cam-rise hinge family.
• Kason 1268: Spring-assisted version of the 1267 for applications requiring additional closing force.

Use the correct hinge family and manufacturer number when replacing the original door hardware.

Commercial Refrigeration Applications

Kason 1268 hinges are used in commercial refrigeration and foodservice equipment such as:

• Reach-in refrigerators
• Reach-in freezers
• Commercial cooler doors
• Commercial freezer doors
• Foodservice refrigeration cabinets
• Restaurant refrigeration equipment
• Convenience-store refrigeration
• Commercial kitchen equipment

Installation & Service Notes

Support the refrigeration door before loosening or removing hinge hardware.

Before removal, document:

• Original hinge orientation
• Mounting-hole locations
• Door position
• Adjustment setting
• Door-to-cabinet spacing
• Gasket compression

Compare the replacement Kason 11268000014 with the removed hinge before installation.

After installation, verify:

• Door opens smoothly
• Spring assistance operates correctly
• Cam movement is smooth
• Door closes correctly
• Door remains properly aligned
• Gasket compression is even
• Latch and strike engage normally
• Mounting hardware remains secure

Why Correct Kason Part Identification Matters

Kason refrigeration hinges can appear almost identical while using different cam, spring, offset, adjustment, and mounting configurations.

Using Kason manufacturer part number 11268000014 together with the 1268 Series, spring-assisted design, and 1-5/8" to 2-3/8" adjustment range provides the strongest replacement reference.

Frequently Asked Questions

What is Kason 11268000014?

Kason 11268000014 is a 1268 Series spring-assisted commercial refrigeration door hinge with a published 1-5/8" to 2-3/8" adjustment / offset range.

Is 11268000014 a Kason 1268 hinge?

Yes. Current commercial parts data identifies 11268000014 as a Kason 1268 Series spring-assisted hinge.

What is the adjustment range?

The published Kason range is approximately 1-5/8" to 2-3/8".

Is the hinge spring assisted?

Yes. The 1268 is Kason's spring-assisted version of the 1267 cam-rise hinge.

What finish does the hinge have?

Kason identifies the hinge family with a polished chrome finish.

Is the hinge adjustable?

Yes. The design allows adjustment to help compensate for door position and gasket compression.

Can a worn hinge cause gasket leaks?

Yes. Door sag or poor hinge alignment can create uneven gasket compression and allow warm air into the refrigerated cabinet.

Should the latch and gasket be checked too?

Yes. Hinge alignment, gasket condition, latch position, and mounting surfaces all affect door closure.

Is 11268000014 the same as a standard 1267 hinge?

No. The 1268 is the spring-assisted version of the 1267 hinge family.

Can I replace this with another Kason hinge that looks similar?

No. Verify manufacturer number, 1268 Series, spring configuration, adjustment range, mounting pattern, and original door arrangement before ordering.

How do I confirm Kason 11268000014 is correct?

Verify manufacturer part number 11268000014, Kason 1268 Series, original hinge dimensions, adjustment range, mounting pattern, door configuration, and gasket alignment before ordering.

Is professional installation recommended?

Qualified commercial refrigeration service personnel can safely support the door and verify hinge alignment, spring operation, gasket compression, and latch engagement.

Why Buy From Parts Direct Online?

Parts Direct Online supplies Kason commercial refrigeration hinges, latches, closers, door gaskets, handles, hardware, and related replacement parts for service technicians, contractors, restaurants, supermarkets, commercial kitchens, and foodservice operations throughout the United States.