Blodgett 50928 Logic Control Board - Commercial Equipment Replacement

Blodgett 50928 OEM Logic Control Board for BX Commercial Ovens

The Blodgett 50928 Logic Control Board is a genuine OEM electronic control board used in compatible Blodgett BX commercial cooking equipment. Blodgett parts documentation identifies OEM part number 50928 as the control board for applicable BX models.

This electronic board is part of the oven's control system and works with other electrical and temperature-control components to coordinate equipment operation. When the original board develops an electrical or electronic failure, the oven may experience intermittent operation, control problems, heating issues, or complete loss of normal operation.

Because Blodgett produced multiple control configurations across the BCX, BX, and CNVX equipment families, technicians should use OEM part number 50928, the equipment model, serial number, production date, and the original control board as the primary references before ordering.

OEM Part Details

• Manufacturer: Blodgett
• OEM Part Number: 50928
• Part Type: Logic / Electronic Control Board
• Primary Verified Application: BX Series
• Equipment Type: Commercial Cooking Equipment
• Application: Compatible Blodgett Commercial Ovens

What the Blodgett 50928 Control Board Does

The Blodgett 50928 control board is an electronic control component used within the oven's operating system. It works with other controls and electrical components to help coordinate the functions required for proper commercial oven operation.

Depending on the exact equipment configuration, the oven control system works in conjunction with components such as:

• Temperature controls
• Temperature probes
• Mode and function switches
• Fan controls
• Heating-system controls
• Relays and electrical switching components
• Safety controls
• Indicator circuits
• Associated wiring and connectors

Because several components work together within the control system, a malfunction that appears to be a failed board should be properly diagnosed before the 50928 is replaced.

Common Symptoms That May Lead to Control Board Diagnosis

A technician may investigate the Blodgett 50928 control board when troubleshooting conditions such as:

• Oven will not operate normally
• Intermittent equipment operation
• Unexpected shutdowns
• Controls fail to respond correctly
• Heating system does not operate as expected
• Heating operation becomes intermittent
• Equipment operates differently after warming up
• Electrical outputs fail to activate associated components
• Visible heat damage on the control board
• Burned or discolored board connections
• Corrosion or moisture damage
• Damaged connectors or terminals
• Intermittent electrical connections

Important: These symptoms do not automatically mean the logic board has failed. Temperature controls, probes, switches, relays, contactors, safety devices, wiring, connectors, power-supply problems, and other components can produce similar symptoms.

Technician Checks Before Ordering

Before replacing an expensive electronic control board, qualified service personnel should verify the complete control circuit and determine that the board is actually responsible for the equipment failure.

Recommended checks include:

• Confirm OEM part number 50928
• Verify equipment model and serial number
• Check equipment production date where applicable
• Compare the replacement with the original control board
• Verify incoming supply voltage
• Inspect wiring harnesses and connectors
• Check for loose or overheated terminals
• Inspect board connections for corrosion
• Check associated switches and controls
• Test temperature-control components as applicable
• Inspect relays and contactors
• Check applicable safety circuits
• Look for moisture contamination
• Inspect the original board for burned components or damaged traces

Completing these checks can help prevent unnecessary replacement of a functioning control board and reduce repeat service calls.

Compatible Blodgett Equipment

Verified BX-series applications associated with this equipment family include:

• BX-14
• BX-14E
• BX-14G

The following related Blodgett model families appear within the same BCX/BX/CNVX equipment platform and may be encountered when researching parts:

• BCX-14
• BCX-14E
• BCX-14G
• CNVX-14
• CNVX-14E
• CNVX-14G

Important Compatibility Note: Do not assume that OEM 50928 fits every BCX or CNVX configuration. Blodgett parts documentation identifies 50928 as the control board for BX models and identifies a different control board for certain BCX applications. Always confirm the model, serial number, production date, original board number, and applicable Blodgett parts documentation before ordering.

Model & Production-Date Verification

Production date is particularly important with this equipment family. Blodgett documentation separates control configurations according to equipment production periods. A board that physically resembles the original component should not be considered compatible based on appearance alone.

Before ordering the Blodgett 50928, locate the equipment data plate and record:

• Full model number
• Serial number
• Voltage
• Production information when available
• Original control-board part number

These details provide a much more reliable method of confirming compatibility than selecting a board based only on the oven series.

Commercial Kitchen Applications

Compatible Blodgett commercial cooking equipment using this type of electronic control system is commonly installed in high-demand foodservice environments including:

• Restaurants
• Hotels
• Hospitals
• Schools
• Universities
• Institutional kitchens
• Corporate cafeterias
• Catering operations
• Correctional facilities
• High-volume foodservice kitchens

Installation & Service Notes

Disconnect electrical power before servicing commercial cooking equipment. Electronic control boards should be handled carefully and protected from static discharge, moisture, impact, and incorrect electrical connections.

Before removing the original board, document the position of all wiring and connectors. Compare the original board with the replacement before transferring connections.

Inspect connectors, terminals, wiring, and related components for signs of overheating or damage before installing the replacement. A wiring fault or failed external component should be corrected before a new control board is energized.

After installation, restore power and test the equipment through an appropriate operating cycle. Verify that the oven controls, heating system, fan operation, temperature-control system, and applicable safety functions operate correctly.

Because the 50928 is an electronic control used in commercial cooking equipment, diagnosis and installation should be performed by qualified commercial foodservice-equipment service personnel.

Why Correct OEM Board Identification Matters

Electronic control boards used across similar Blodgett oven families may look alike while having different internal logic, electrical connections, or intended applications.

Using Blodgett OEM part number 50928 as the primary identifier helps prevent incorrect board selection. Never substitute another board solely because its connectors, dimensions, or physical appearance seem similar.

Correct identification is especially important on older equipment where control configurations may have changed during the production life of the oven.

Frequently Asked Questions

What is the Blodgett 50928?

The Blodgett 50928 is an OEM electronic control board identified in Blodgett parts documentation for compatible BX commercial oven applications.

Which Blodgett models use the 50928 control board?

Blodgett documentation identifies 50928 as the control board for applicable BX models. BX equipment in this family includes BX-14, BX-14E, and BX-14G configurations. Model, serial number, production date, and original board verification are recommended before ordering.

Does Blodgett 50928 fit the BX-14?

The 50928 is identified as a BX-series control board. Confirm the BX-14 equipment serial number, production date, and original board number before replacement because production revisions can affect parts selection.

Does Blodgett 50928 fit the BX-14E?

BX-14E belongs to the BX-14 equipment family associated with this control system. Verify OEM 50928 against the original board and equipment identification before ordering.

Does Blodgett 50928 fit the BX-14G?

BX-14G is part of the BX equipment family. Confirm the serial number, production date, and original control-board number to ensure the correct replacement.

Does 50928 fit Blodgett BCX-14 ovens?

Do not assume it does. Blodgett documentation identifies a different control-board part number for certain BCX models. Verify the BCX model, serial number, production date, and original board before ordering.

Does 50928 fit CNVX-14 ovens?

CNVX-14 equipment is part of the related BCX/BX/CNVX equipment platform, but the correct control configuration should be determined from the specific model, serial number, production date, and Blodgett parts documentation rather than assuming 50928 compatibility.

Can a bad Blodgett 50928 cause intermittent operation?

An electronic control-board failure can cause intermittent operation, but wiring, switches, probes, relays, connectors, and other controls can produce similar symptoms. Proper electrical diagnosis should be completed first.

Can the control board cause a no-heat condition?

A control-system failure may contribute to a no-heat condition, but technicians should also inspect the temperature-control circuit, heating components, relays, contactors, safety controls, wiring, and power supply before replacing the board.

What should I check before replacing the 50928?

Confirm incoming power, wiring, connectors, switches, temperature-control components, relays, safety circuits, equipment model and serial number, production date, and the OEM number printed on or associated with the original board.

Should I replace a board that has visible burn damage?

Visible electronic damage is a strong reason for further diagnosis, but the underlying cause should also be identified. A shorted external component, damaged wiring, incorrect voltage, or another electrical problem can damage a replacement board if the root cause is not corrected.

Is professional installation recommended?

Yes. Electronic control-board diagnosis and replacement should be performed by qualified commercial cooking-equipment service personnel who can verify the complete electrical and control system before energizing the replacement.

Why Buy From Parts Direct Online?

Parts Direct Online supplies OEM commercial cooking and commercial refrigeration replacement parts for service technicians, contractors, restaurants, hotels, schools, hospitals, institutional kitchens, and foodservice facilities throughout the United States.

Our focus is helping commercial equipment professionals identify the correct OEM replacement component, reduce incorrect-part orders, and minimize costly equipment downtime.