Anthony Electrical Hinge Pin Receptacles – Left, Right & Double

Anthony Electrical Hinge Pin Receptacles – Left, Right & Double

Replace damaged or unreliable electrical hinge-pin connections on compatible Anthony commercial refrigerated display doors with the correctly identified Anthony electrical hinge pin receptacle.

These electrical connectors provide the mating connection for designated hinge-pin wiring assemblies, helping maintain continuity between the refrigerated display door and the equipment's electrical system.

Three manufacturer configurations are available: Left Single, Right Single and Double Receptacle. Each configuration has a separate Anthony manufacturer part number and must be matched to the original door wiring arrangement.

Important: The single left, single right and double configurations are not interchangeable based on appearance alone. Confirm the original connector, pin arrangement, wiring and equipment documentation before ordering.

Choose the option by its full part number

Use this quick reference to match the option in the selection menu to the part you need:

The left and right singles are separate selectable options. Match the complete part number and original connector arrangement before adding your selection to the cart.

Anthony OEM Part Numbers and Available Options

Left-Hand Electrical Receptacle – 60-12376-0001

• Manufacturer: Anthony International
• Manufacturer Part Number: 60-12376-0001
• Configuration: Single Station, Left Hand
• Manufacturer Description: Single/Reversible Electrical Hinge Pin Receptacle, Left
• Published Replacement Wiring Configuration: 3-Wire
• Application: Compatible Anthony refrigerated display-door electrical hinge connections

Right-Hand Electrical Receptacle – 60-12376-0002

• Manufacturer: Anthony International
• Manufacturer Part Number: 60-12376-0002
• Configuration: Single Station, Right Hand
• Manufacturer Description: Single/Reversible Electrical Hinge Pin Receptacle, Right
• Published Replacement Wiring Configuration: 3-Wire
• Application: Compatible Anthony refrigerated display-door electrical hinge connections

Double Electrical Receptacle – 60-12377-0001

• Manufacturer: Anthony International
• Manufacturer Part Number: 60-12377-0001
• Configuration: Double/Reversible Receptacle
• Manufacturer Description: Dual Station Electrical Hinge Pin Receptacle
• Published Replacement Wiring Configuration: 6-Wire
• Application: Compatible Anthony double electrical hinge connection arrangements

Selection Note: The Double version is offered as the Middle option in this product's selection menu. Confirm that your equipment requires the double-receptacle configuration before choosing that option.

Product Specifications

• Brand: Anthony
• Product Type: Electrical Hinge Pin Receptacle
• Available Manufacturer Numbers: 60-12376-0001, 60-12376-0002, 60-12377-0001
• Available Configurations: Left Single, Right Single, Double
• Component Category: Commercial Refrigeration Door Electrical Hardware
• Function: Hinge-Pin Electrical Connection
• Equipment Application: Compatible Anthony Refrigerated Display Doors
• Electrical Ratings: Verify against manufacturer wiring documentation
• Connector Pinout: Must match the original electrical assembly
• Manufacturer Part Status: Anthony OEM numbers verified; actual supplied inventory classification requires confirmation

Compatible Anthony Door Models and Series

Published replacement-parts catalogs list these manufacturer part numbers for selected Anthony refrigerated display-door applications, including:

• Anthony Model 100
• Anthony Model 101
• Anthony Model 101EF
• Anthony Model 103
• Anthony Model 2100
• Anthony Model 5001

Anthony's 401 Series frame replacement documentation also identifies the left-hand and right-hand single-station connectors, 60-12376-0001 and 60-12376-0002.

Compatibility Warning: The listed models are published application references, not universal fitment guarantees. Electrical configurations, door production dates, frame designs and wiring arrangements may differ. Verify the original manufacturer part number and equipment serial number before purchasing.

Product Function and Operation

The electrical hinge pin receptacle provides a connection interface between the mating electrical hinge pin and the wiring associated with the refrigerated display-door assembly.

On applicable equipment, the electrical hinge connection may supply or route power for door-associated electrical components, depending on the manufacturer wiring design.

The receptacle's connection surfaces, terminal arrangement and wire routing must match the original installation for correct operation.

This component is an electrical receptacle. It is not a mechanical hinge, torque rod, door closer, heater element or complete electrical hinge-pin assembly.

Common Symptoms of a Failed Hinge Pin Receptacle

• Intermittent electrical operation at the display door.
• Loose or damaged electrical connector contacts.
• Visible corrosion or oxidation at the receptacle.
• Discolored or overheated electrical terminals.
• Cracked or broken receptacle housing.
• Damaged, frayed or disconnected wiring leads.
• Door-associated electrical components stop functioning.
• Electrical operation changes as the door opens or closes.

Technician Note: Similar symptoms may result from a damaged mating hinge pin, wiring harness, connector terminals, power supply or another electrical component. Inspect the complete circuit before determining that the receptacle requires replacement.

Technician Troubleshooting Guide

• Verify the original Anthony manufacturer part number.
• Determine whether the equipment requires a left single, right single or double receptacle.
• Inspect the connector housing for cracks or deformation.
• Check terminals for corrosion, looseness or signs of overheating.
• Inspect the mating electrical hinge pin and contact surfaces.
• Check wiring leads for mechanical damage or broken connections.
• Verify the connector arrangement against the equipment electrical diagram.
• Confirm the intended circuit voltage and electrical ratings.
• Perform continuity and electrical checks according to the manufacturer's service procedures.
• Inspect the hinge area for wiring damage caused by repeated door movement.

Before You Order

1. Locate the equipment manufacturer, complete model number and serial number.
2. Confirm the original Anthony manufacturer part number.
3. Select the correct variant:
   • Left – 60-12376-0001
   • Right – 60-12376-0002
   • Double/Middle – 60-12377-0001
4. Compare the number and arrangement of receptacle connection points.
5. Verify the mating hinge-pin connector configuration.
6. Compare electrical wire count, wire routing and connector keying.
7. Confirm the appropriate electrical specifications and terminal assignments.
8. Inspect the original mounting and retention arrangement.
9. Verify that the selected replacement matches the manufacturer's equipment parts diagram.
10. Contact PartsDirectOnline if the original configuration cannot be positively identified.

Installation and Electrical Safety

Electrical hinge-pin receptacle replacement should be performed by qualified refrigeration service personnel familiar with commercial display-door electrical systems.

Disconnect and secure electrical power before servicing the door wiring. Verify that the circuit is de-energized before disconnecting electrical components.

Document the original connector orientation, wire routing and mating connections before removal. Replace the component using the correct manufacturer-approved wiring information and installation procedure.

Do not assume that wire colors or connector appearance alone establish proper terminal assignments.

After installation, check connector engagement, wiring security and normal operation of the affected electrical circuits according to the equipment service documentation.

Frequently Asked Questions

1. What is an Anthony electrical hinge pin receptacle?

It is an electrical connection component used in compatible Anthony refrigerated display-door hinge assemblies. It connects the mating hinge-pin electrical interface to the associated wiring.

2. What is Anthony OEM 60-12376-0001?

It is the Anthony single-station left-hand electrical hinge pin receptacle. Published replacement-parts references identify a three-wire configuration.

3. What is Anthony OEM 60-12376-0002?

It is the Anthony single-station right-hand electrical hinge pin receptacle. Match its connector orientation and wiring to the original equipment.

4. What is Anthony OEM 60-12377-0001?

It is the Anthony double/reversible electrical hinge pin receptacle. Published replacement-parts references identify a six-wire configuration.

5. Are the left, right and double receptacles interchangeable?

No. These components have different manufacturer designations and connection configurations. Confirm the original part number and equipment electrical arrangement before ordering.

6. Which Anthony models use these electrical receptacles?

Published replacement catalogs identify applications for models 100, 101, 101EF, 103, 2100 and 5001. The Anthony 401 Series parts documentation also identifies the single left and right versions. Confirm the equipment's specific wiring and serial-number configuration.

7. Can a damaged hinge receptacle cause intermittent door electrical problems?

Yes. Poor electrical contact, loose terminals or damaged wiring may interrupt operation of connected door-associated electrical components. Proper circuit testing is needed to confirm the failure.

8. How do I identify the correct Anthony receptacle?

Compare the original manufacturer number, door model, wiring diagram, connector orientation, wire count, mating hinge pin and electrical terminal arrangement. Contact PartsDirectOnline with photographs and equipment information if assistance is needed.

Anthony Commercial Refrigeration Door Electrical Parts

PartsDirectOnline supplies commercial refrigeration door electrical components, hinge-pin receptacles, door hinges, torque rods, gaskets and related replacement hardware for refrigeration service technicians, maintenance departments, supermarkets and commercial refrigeration operators across the United States.

Browse related Anthony commercial refrigeration replacement parts for additional door hardware and electrical components.

Need Help Confirming Fitment? Call PartsDirectOnline at 631-873-0509 with your door model, serial number and original receptacle part number before ordering.