Anthony Hinge Pin with Leads Door Heater / Anti-Sweat Power Assembly

Verified Product Identification

• Manufacturer: Anthony
• OEM Number: 60-10847-0004
• MPN: 60-10847-0004
• SKU: PD-116-019
• Part Type: Hinge

Product Overview

Anthony 60-10847-0004 is a hinge pin with leads used as a door heater and anti-sweat power assembly in commercial refrigeration equipment. This component combines a hinge-related door assembly position with electrical leads that support the equipment heating circuit. Its role is tied to maintaining the intended heated-door function around the door assembly, where proper electrical connection and correct component identification matter to reliable operation. For service teams maintaining display doors, merchandisers, walk-in display refrigeration, or other verified commercial refrigeration applications, this assembly should be selected by the Anthony manufacturer part number rather than appearance alone. Hinge hardware can look similar across door designs while lead placement, mounting arrangement, and electrical connection details differ. Matching the original Anthony 60-10847-0004 component helps reduce the risk of receiving a part that cannot be properly installed or connected. Because this item includes electrical leads and supports a heating function, it deserves the same careful comparison given to other heat-circuit components. Review the original hinge pin assembly, lead routing, connection points, mounting details, and equipment identification before ordering. Qualified commercial equipment service is recommended where electrical diagnosis or replacement is required.

Product Function

This Anthony hinge pin assembly provides a hinge-related mounting function while supporting the door heater and anti-sweat power circuit through its attached leads. In the intended door assembly, it helps place the component where the equipment design calls for heated-door power service. The electrical leads connect the assembly to the applicable heat circuit, so correct terminal condition, lead routing, and component matching are important considerations. The part should not be treated as ordinary door hardware. Its combination of hinge and heating-circuit duties means that both mechanical fit and electrical details must agree with the original component. Verify the Anthony OEM number 60-10847-0004, compare the original assembly closely, and have electrical concerns evaluated by qualified personnel.

Why Choose a Genuine OEM Replacement?

An Anthony OEM part provides a clear manufacturer part-number reference for ordering: 60-10847-0004. That identification is especially valuable for a hinge pin assembly with electrical leads, where a visual match alone may not confirm the correct mounting arrangement or electrical connection details. Using the original manufacturer number as the starting point supports a more careful comparison of the removed component, equipment information, and door assembly configuration. Verify the OEM number and original component before purchase.

How This Part Works

The assembly operates at the intersection of the door hinge area and the equipment heating circuit. Mechanically, the hinge pin portion belongs to the door assembly. Electrically, the attached leads provide the connection path required for the specified door heater or anti-sweat power function. When the equipment calls for that heat circuit, the assembly must be correctly mounted and connected so the circuit can perform as intended. The exact electrical rating, control sequence, and equipment-specific wiring arrangement must be confirmed from the equipment documentation and the original component. A problem elsewhere in the heat circuit can affect results even when the hinge pin assembly is present. For that reason, service personnel should evaluate lead condition, connection points, applicable limit controls, and switching components as appropriate. Do not assume that a hinge issue, moisture concern, or heat-circuit concern is caused by this assembly without diagnosis.

Technician Service Tip

Before replacing the assembly, compare the removed part with Anthony 60-10847-0004 at the hinge location. Check lead length and routing, connector or terminal condition, mounting relationship, and signs of damaged insulation or heat discoloration. Disconnect equipment power before electrical service, and use qualified personnel for heat-circuit diagnosis.

Common Failure Symptoms

• A door heating or anti-sweat concern may indicate that the hinge pin assembly and connected heat circuit should be inspected.
• Visible damage to the leads or insulation can indicate the need to evaluate the assembly and its routing.
• Darkened, loose, or heat-marked connection points may indicate resistance or connection concerns in the circuit.
• An open-circuit finding during qualified electrical diagnosis may indicate that the assembly requires further evaluation.
• A hinge-area component that no longer matches the original mounting arrangement should be inspected before replacement.
• Intermittent heat-circuit operation can indicate a need to inspect leads, terminals, and associated switching components.
• Physical wear or damage around the hinge location may indicate that the assembly and mounting hardware need review.
• Evidence of pinching, rubbing, or strained lead routing can indicate a condition that should be corrected during service.
• A related limit control or relay concern may indicate that the complete heating circuit needs evaluation rather than replacement of one part alone.
• A replacement assembly that does not match the original lead arrangement or connection details should not be installed without confirming the correct part number.

Commercial Applications

Anthony 60-10847-0004 is identified for commercial refrigeration equipment and is relevant to heated door and anti-sweat power service where the equipment documentation calls for this assembly. Anthony equipment context includes display doors, merchandising refrigeration, walk-in display refrigeration, and refrigerated cases; however, exact equipment fitment must be confirmed from approved equipment documentation. This part is suited to commercial equipment service work involving door assemblies and associated heating circuits. Restaurant operators, retail food display locations, refrigeration contractors, and facility maintenance teams should verify the equipment model, serial number, original part number, and door details before placing an order.

Before You Order

• Match Anthony OEM number 60-10847-0004 to the original component and approved equipment documentation.
• Verify the equipment model and serial number before ordering, since exact fitment was not supplied.
• Compare the original hinge pin assembly with the product image and confirm the overall hinge arrangement.
• Inspect the attached leads and compare their routing, length, and connection style with the removed part.
• Confirm mounting points and hinge-location orientation before purchase.
• Review terminals or connectors for placement, condition, and any visible heat damage.
• Do not assume voltage, wattage, or wiring details; confirm electrical characteristics from equipment documentation.
• Inspect related limit controls, relays or contactors, and wiring terminals when diagnosing a heat-circuit concern.
• Use qualified commercial equipment service personnel when electrical diagnosis or installation is required.
• Confirm that the replacement part matches the original component before returning equipment to service.

Related Components

• Limit thermostat: Inspect the applicable limit control because it may affect operation of the associated heating circuit.
• Wiring terminals: Check terminal condition, tightness, and signs of heat damage where the assembly leads connect.
• Contactor or relay: Evaluate the switching component that supplies the relevant heat circuit when heat operation is inconsistent.
• Hinge mounting hardware: Inspect related hardware for wear, alignment concerns, or damage that could affect the hinge assembly position.

Frequently Asked Questions

What is Anthony part number 60-10847-0004?

Anthony 60-10847-0004 is a hinge pin with leads identified as a door heater and anti-sweat power assembly for commercial refrigeration equipment. Confirm equipment-specific fitment before ordering.

Is this only a mechanical door hinge part?

No. The assembly includes leads and is associated with a heating circuit, so it should be compared as both a hinge-related component and an electrical part. Verify mounting and connection details against the original component.

How should I confirm that this hinge pin assembly is correct?

Start by matching Anthony OEM number 60-10847-0004. Then compare the removed assembly, lead routing, terminals or connectors, mounting arrangement, equipment model, and serial number with approved documentation.

Should the leads and terminals be inspected when this part is replaced?

Yes. Inspect lead insulation, routing, and connection points for wear, damage, looseness, or heat marks. Related limit controls and switching components may also need evaluation during qualified electrical service.

Can a heat-circuit concern always be traced to this assembly?

No. A heat-circuit concern can involve wiring terminals, a limit thermostat, a relay or contactor, or other equipment-specific components. The assembly should be evaluated as part of a complete diagnosis.

Are voltage and wattage specifications available for Anthony 60-10847-0004?

Electrical specifications were not supplied for this item. Confirm the required electrical characteristics from the equipment documentation and original component before ordering or installation.