Turbo Air Solid State Power Relay | OEM Replacement Component

OEM Part Details

• Manufacturer: Turbo Air
• OEM Number: 134-112
• OEM Status: VERIFIED
• MPN: 134-112
• SKU: 134-112
• Part Type: Hinge

Product Overview

OEM Part Details Manufacturer: Turbo Air OEM Part Number: 134-112 MPN: 134-112 SKU: 134-112 Part Type: Hinge OEM Status: VERIFIED Product Overview The Turbo Air 134-112 hinge is a door hardware component for commercial refrigeration equipment. A hinge carries the door through its opening and closing movement while helping the door remain positioned correctly against the cabinet. That role matters because a door that hangs unevenly, drags, shifts, or does not close consistently can affect everyday cabinet access and place added strain on related door hardware. For commercial refrigeration service, the hinge should be treated as more than a simple mounting piece. Its condition can influence door alignment, latch engagement, gasket contact, and the general feel of the door during routine use. Replacing a worn or damaged hinge with the identified Turbo Air OEM part helps technicians and operators maintain a properly supported door assembly while reducing uncertainty during part selection. This listing identifies Turbo Air part number 134-112 as a hinge. Match that number to the original component and review the existing mounting arrangement before ordering. Exact equipment fitment is not stated here, so the equipment data plate and original hardware remain important references for a careful order.

Product Function

Product Function A hinge provides the pivot point that allows a commercial refrigeration door to swing open and return toward its closed position. It supports the relationship between the door and cabinet, helping the door maintain a consistent path as it moves. When the hinge, its mounting points, or associated hardware becomes worn, loose, bent, or damaged, the door may no longer sit as intended. The Turbo Air 134-112 hinge is identified as an OEM door hardware part. In the door assembly, correct hinge condition helps support dependable access, alignment with the latch area, and even contact between the door gasket and cabinet opening. It should be considered alongside the condition of the gasket, latch, closer, pins, screws, and surrounding mounting surfaces.

Why Choose a Genuine OEM Replacement?

Why Choose a Genuine OEM Replacement? Using the Turbo Air OEM hinge identified by part number 134-112 gives the service team a clear part-number reference when replacing door hardware. The original manufacturer number helps narrow the order to the intended component and reduces the risk of selecting a hinge based only on a general appearance. Compare the OEM number, original hinge configuration, and mounting arrangement before purchase for greater service confidence.

How This Part Works

How This Part Works A door hinge works as a mechanical pivot between the cabinet structure and the door assembly. As the door opens, the hinge guides its movement around the pivot point. As the door closes, the hinge helps the door return to its intended position relative to the cabinet face, gasket, latch, and other hardware. Proper positioning is important because door hardware functions as an assembly rather than as isolated pieces. Wear at the hinge, pin area, fasteners, or mounting surface can allow movement that was not present when the door assembly was properly aligned. That movement may show up as a door that sits low, shifts at the latch side, rubs during travel, or requires added effort to close. The hinge itself should be evaluated together with the door gasket and latch components, since those parts can reveal whether the door is closing evenly. This Turbo Air OEM hinge is identified by manufacturer part number 134-112.

Technician Service Tip

Technician Service Tip Before replacing door hardware, compare the original hinge with the ordered part for mounting arrangement, orientation, and visible wear. Inspect the gasket, latch area, hinge fasteners, and door position at the same time so related alignment concerns can be addressed during service.

Common Failure Symptoms

• A door may sag slightly at the latch side, which can indicate hinge wear or looseness in the mounting area.
• Uneven gasket contact around the cabinet opening may warrant inspection of door alignment and hinge condition.
• A door that rubs, binds, or drags during movement can indicate a worn, shifted, or damaged hinge assembly.
• Repeated adjustment of the latch side may point to movement at the hinge or its mounting points.
• Visible play when the door is lifted gently may indicate that the hinge, pin area, or related hardware should be inspected.
• A door that does not return to a consistent closed position may indicate an alignment concern involving the hinge and associated hardware.
• Loose, damaged, or missing hinge fasteners can indicate that the complete mounting area needs attention.
• Gasket compression that appears stronger on one side of the door than the other may indicate a door-position issue that should be evaluated.

Commercial Applications

Commercial Applications This Turbo Air hinge is identified for use as a commercial refrigeration door hardware component. It is relevant to commercial refrigeration service where cabinet doors require dependable support, controlled movement, and correct alignment with surrounding hardware. Foodservice maintenance teams, refrigeration service companies, restaurant operators, and cold-storage facilities may encounter hinge wear during routine cabinet service. Because specific equipment fitment is not verified in this listing, the part should be ordered by the Turbo Air 134-112 OEM number and by comparison with the original component rather than by a general equipment description alone.

Before You Order

• Match Turbo Air OEM part number 134-112 to the original component.
• Confirm that the product is being ordered as a hinge, not as another door hardware item.
• Compare the original hinge's overall configuration with the product image and part description.
• Review the hinge orientation and its position on the door assembly.
• Compare the mounting arrangement and visible mounting-hole placement with the original component.
• Check the equipment data plate for manufacturer, equipment identification, and serial information.
• Inspect the original hinge for wear, damage, looseness, or altered mounting hardware.
• Review the condition of the door gasket, latch, closer, pins, and fasteners before placing the order.

Related Components

• Door gasket: Inspect gasket contact and compression because uneven sealing can accompany a door that is out of alignment.
• Hinge screws or pins: Check for loose, worn, missing, or damaged hardware that may affect hinge movement and door support.
• Door latch: Review latch engagement because a shifted door position can prevent the latch from closing consistently.
• Door closer: Inspect the closer where present, since door closing behavior can involve both the hinge arrangement and closing hardware.

Frequently Asked Questions

What is Turbo Air part number 134-112?

Turbo Air part number 134-112 is identified as a hinge for commercial refrigeration equipment.

Is the Turbo Air 134-112 a genuine OEM part?

Yes. The 134-112 hinge is identified as a Turbo Air OEM part.

What should I compare before ordering this hinge?

Match the Turbo Air 134-112 OEM number and compare the original hinge's configuration, orientation, and mounting arrangement.

Can a worn hinge affect door gasket contact?

It can. A hinge that allows the door to shift may contribute to uneven gasket contact, so the hinge and gasket should be inspected together.

What door hardware should be inspected with this hinge?

Inspect the door gasket, hinge screws or pins, latch, closer, and the surrounding mounting area for wear, looseness, or damage.