Traulsen Wheel Caster with Brake — 5 Inch Wheel | 6 Inch Overall Height | OEM Replacement

OEM Part Details

• Manufacturer: Traulsen
• OEM Number: 344-13140-01
• OEM Status: VERIFIED
• MPN: 344-13140-01
• SKU: PD-120-037
• Part Type: Hinge

Product Overview

OEM Part Details Manufacturer: Traulsen OEM Part Number: 344-13140-01 MPN: 344-13140-01 SKU: PD-120-037 Part Type: Hinge Equipment Category: Commercial refrigeration equipment Product Overview The Traulsen 344-13140-01 hinge is an OEM door-hardware component for commercial refrigeration equipment. A hinge carries the weight of the door while allowing it to swing, align, and close consistently against the cabinet opening. Its condition matters because door movement, latch engagement, and gasket contact all depend on the door remaining properly supported. When hinge hardware becomes worn, loose, damaged, or misaligned, the door may not operate as intended and related door components should be inspected. For cabinet service, this Traulsen OEM part gives technicians and facility maintenance teams a reliable identification point when replacing a hinge associated with a worn or damaged original component. The manufacturer part number 344-13140-01 should be matched to the original part and equipment information before purchase. Reviewing the mounting arrangement, door position, and surrounding hardware helps reduce wrong orders and supports a more complete door-hardware repair. This part is intended for commercial refrigeration service where dependable door operation is an important part of routine equipment upkeep.

Product Function

Product Function This hinge provides the mechanical pivot and support needed for a commercial refrigeration cabinet door to open and close. It helps hold the door in its intended position at the cabinet opening so the latch, strike, and door gasket can work together correctly. Because door hardware carries repeated loading during daily use, hinge condition can affect how smoothly the door moves and whether it appears aligned with the cabinet frame. As a Traulsen OEM part, number 344-13140-01 provides a specific manufacturer reference for replacement identification. A correct hinge selection requires more than matching the general part category. The original component, mounting points, orientation, and equipment data plate information should all be reviewed before ordering. Addressing worn hinge hardware can also provide an opportunity to inspect the rest of the door assembly for related wear.

Why Choose a Genuine OEM Replacement?

Why Choose a Genuine OEM Replacement? Traulsen OEM hinge 344-13140-01 provides the manufacturer part-number reference needed for accurate replacement identification. Matching the original component to the OEM number helps service teams avoid ordering a hinge based only on a similar appearance or general door-hardware description. Comparing the original part, its mounting arrangement, and the equipment information before purchase supports a more confident repair decision.

How This Part Works

How This Part Works A door hinge works as a mechanical connection between the cabinet and door assembly. Its pivoting action permits the door to travel through its opening and closing movement while supporting the door at its mounting location. In normal operation, the hinge helps maintain the door's relationship to the cabinet frame. That relationship is important because a shifted door can affect gasket contact, latch engagement, and the overall feel of door movement. Repeated use can place ongoing load on hinge hardware and its mounting area. If wear, looseness, or damage develops, the door may no longer sit as expected when closed. The hinge should therefore be considered alongside the gasket, latch, closer, mounting hardware, and door alignment. Replacing the identified component is only one part of a careful door-hardware assessment; comparison of the original hinge and its mounting arrangement remains important before installation.

Technician Service Tip

Technician Service Tip Before replacing door hardware, compare the original hinge with OEM part number 344-13140-01 and inspect the mounting points for wear or looseness. Check door alignment and examine the gasket, latch, and related hardware so a separate door-assembly issue is not overlooked.

Common Failure Symptoms

• A door that feels loose during opening or closing may indicate hinge or mounting-hardware wear.
• Door alignment that appears uneven at the cabinet opening can indicate that the hinge area should be inspected.
• A door that does not sit consistently against the frame may indicate a hinge, gasket, or alignment concern.
• Difficulty achieving normal latch engagement can indicate that the door hardware and alignment need evaluation.
• Visible wear, damage, or looseness around the hinge mounting location should be inspected.
• A door that moves unevenly through its travel may indicate worn or damaged hinge-related components.
• Changes in gasket contact around the door opening can indicate a need to inspect hinge condition and door position.
• Repeated adjustment needs at the door assembly may indicate that the hinge, mounting hardware, latch, and gasket require review.

Commercial Applications

Commercial Applications This Traulsen hinge is identified for use in commercial refrigeration equipment service. It is suited to door-hardware maintenance performed by refrigeration service companies, restaurant maintenance teams, institutional kitchen facilities, and commercial cold-storage operations where cabinet doors receive regular use. Reliable door movement and alignment are practical concerns in busy foodservice environments because the hinge works with the door gasket, latch, and cabinet opening as part of the complete door assembly. Equipment-specific fitment is not stated here. Confirm the equipment model and serial number, compare the original hinge, and review the mounting arrangement before ordering. Those checks are especially useful when servicing equipment with prior door repairs or visible wear at the mounting area.

Before You Order

• Match Traulsen OEM part number 344-13140-01 to the original component whenever possible.
• Compare the original hinge's overall form and mounting arrangement with the product image and available part details.
• Confirm the equipment manufacturer is Traulsen.
• Review the equipment model and serial number from the data plate before purchase.
• Check the hinge orientation and door position before selecting a replacement.
• Inspect the mounting points and surrounding door hardware for visible wear or damage.
• Examine the door gasket for uneven compression or damage that may affect door alignment.
• Check the latch, closer, and hinge screws or pins for related wear before completing the repair.

Related Components

• Door gasket: Inspect gasket condition and compression because door alignment can affect contact at the cabinet opening.
• Hinge screws or pins: Check associated mounting hardware for wear, looseness, or damage when replacing a hinge.
• Door latch: Review latch engagement because a shifted door position can affect how the latch meets the cabinet.
• Door closer: Inspect the closer where equipped, since it works with the hinge and latch to support consistent door closure.

Frequently Asked Questions

What is Traulsen part number 344-13140-01?

Traulsen part number 344-13140-01 is identified as an OEM hinge for commercial refrigeration equipment door hardware.

Why should I match the OEM number before ordering this hinge?

Matching OEM number 344-13140-01 to the original component helps identify the intended Traulsen replacement and reduces the risk of selecting a hinge based only on appearance.

What should be inspected with a replacement door hinge?

Inspect the gasket, latch, closer, hinge screws or pins, mounting points, and overall door alignment. These related components can affect door operation and may show wear at the same time.

Can a worn hinge affect door alignment?

Yes. A worn, damaged, or loose hinge area may affect how the door sits at the cabinet opening. The hinge and related door hardware should be evaluated when alignment concerns are present.

How do I confirm this Traulsen hinge is correct for my equipment?

Compare OEM part number 344-13140-01 with the original hinge, review the mounting arrangement and orientation, and confirm the equipment model and serial number before ordering.