Traulsen Air Cell Snap-In Magnetic Door Gasket Replacement

OEM Part Details

• Manufacturer: Traulsen
• OEM Number: SVC-60005-00
• OEM Status: VERIFIED
• MPN: SVC-60005-00
• SKU: 341-60005-01
• Part Type: Magnetic Door Gasket

Product Overview

OEM Part Details Manufacturer: Traulsen OEM Part Number: SVC-60005-00 SKU: 341-60005-01 Part Type: Air Cell snap-in magnetic door gasket OEM Status: VERIFIED Product Overview The Traulsen SVC-60005-00 Air Cell snap-in magnetic door gasket is an OEM door-sealing component for commercial foodservice equipment. Installed around the door perimeter, this gasket helps the door close against the cabinet frame and maintain a consistent seal at the opening. Its magnetic sealing surface helps hold the door in position, while the snap-in mounting style is intended to secure the gasket in the appropriate door channel. A worn, torn, hardened, or misshaped gasket can prevent the door from making even contact around the frame. That condition can allow unwanted air movement through the door perimeter, contribute to moisture around the opening, and make normal door closure less reliable. Replacing a damaged gasket helps restore the door assembly to proper service condition when the original component is confirmed as Traulsen OEM part SVC-60005-00. Because door gasket profiles, mounting styles, and door configurations can vary, correct identification matters. Compare the original gasket, its mounting edge, the door channel, and equipment identification information before ordering. This listing identifies a Traulsen magnetic door gasket by OEM number SVC-60005-00; no equipment-model fitment is stated here.

Product Function

Product Function This Traulsen magnetic door gasket provides a compressible sealing surface between a commercial equipment door and its surrounding frame. The gasket is intended to help close the gap around the door perimeter when the door is shut. Its magnetic feature assists door retention at the sealing surface, and its snap-in style supports placement in the applicable door gasket channel. Proper gasket condition is important to the overall operation of a door assembly. A gasket that is torn, distorted, loose, or no longer making consistent contact should be inspected along with the door, frame, hinges, latch, and gasket channel. The correct replacement is identified by Traulsen OEM number SVC-60005-00.

Why Choose a Genuine OEM Replacement?

Why Choose a Genuine OEM Replacement? Traulsen OEM part SVC-60005-00 provides a reliable identification point when replacing the original magnetic door gasket. Matching the manufacturer part number helps distinguish this gasket from similar-looking door seals with different profiles, mounting edges, or magnetic arrangements. Using the verified OEM number alongside a comparison of the original component can help reduce wrong-order risk and support more confident commercial equipment service.

How This Part Works

How This Part Works A magnetic door gasket works at the meeting point between the door and cabinet frame. When the door closes, the gasket compresses around the perimeter to create a continuous contact surface. The magnetic portion of the gasket helps draw and hold the door against the frame, while the flexible gasket material accommodates normal door movement and compression. The snap-in edge is designed to sit in the corresponding gasket channel on the door assembly. For the gasket to work consistently, it must be seated evenly, the door must close squarely, and the frame contact area must remain free of damage or buildup that can interrupt the seal. Uneven compression, a loose mounting edge, or poor door alignment can prevent a new gasket from performing as intended. Inspecting the complete door assembly helps identify conditions that may affect the replacement gasket.

Technician Service Tip

Technician Service Tip Before replacing the gasket, compare the original mounting edge and perimeter shape with the replacement. Inspect the door channel, hinge condition, latch engagement, and frame contact area for conditions that could prevent even gasket compression.

Common Failure Symptoms

• Visible tears, splits, cracks, or missing sections in the gasket may indicate that replacement is needed.
• A gasket that feels hardened, flattened, or permanently deformed should be inspected for compression loss.
• Gaps between the door gasket and frame when the door is closed can indicate uneven sealing contact.
• A door that requires extra pressure to remain closed may indicate a gasket, latch, hinge, or alignment concern.
• Sections of the gasket pulling away from the door channel can indicate that the snap-in mounting edge needs attention.
• Uneven contact marks around the door perimeter may indicate that the gasket is not compressing consistently.
• Moisture or residue near the door opening may indicate that the door seal and frame contact area should be inspected.
• Noticeable air movement around the closed door perimeter can indicate a gasket, door alignment, or frame-contact issue.
• A magnetic gasket that does not sit flat against the frame should be inspected for distortion or installation concerns.

Commercial Applications

Commercial Applications This Traulsen OEM magnetic door gasket is identified for commercial foodservice equipment service where a cabinet door relies on a continuous perimeter seal. It is relevant to restaurant kitchens, institutional foodservice operations, commercial maintenance departments, and equipment service companies that maintain Traulsen door assemblies. The OEM number SVC-60005-00 identifies the replacement component, but equipment-model fitment is not stated. Confirm suitability with the equipment data plate, serial information, original gasket profile, mounting style, and applicable manufacturer service information before purchase.

Before You Order

• Match Traulsen OEM part number SVC-60005-00 to the original component or approved service information.
• Compare the original gasket profile and snap-in mounting edge with the replacement.
• Confirm the equipment manufacturer, equipment model, and serial information from the data plate.
• Inspect the full door perimeter to confirm the required gasket shape and orientation.
• Check the gasket channel for damage, buildup, or sections that may prevent the new gasket from seating correctly.
• Compare dimensions only with approved source data or a careful measurement of the original gasket.
• Inspect door hinges, latch engagement, and door alignment for conditions that can affect gasket compression.
• Review the product image with the original component, including the mounting edge and magnetic sealing surface.
• Confirm that the order is for a Traulsen magnetic door gasket identified by OEM number SVC-60005-00.

Related Components

• Door hinges should be inspected because hinge wear or misalignment can prevent the door from applying even pressure to the gasket.
• Door latch components should be checked because weak or incorrect latch engagement can leave gaps at the door perimeter.
• Door closer components should be evaluated where used, since incomplete door closure can affect gasket contact.
• Gasket retainer or door channel surfaces should be inspected for damage or buildup that may keep a snap-in gasket from seating evenly.
• Door frame contact surfaces should be examined for dents, damage, or residue that can interrupt a continuous seal.

Frequently Asked Questions

What is Traulsen OEM part SVC-60005-00?

Traulsen OEM part SVC-60005-00 is an Air Cell snap-in magnetic door gasket identified for commercial foodservice equipment door service.

What does a magnetic door gasket do?

A magnetic door gasket helps create a compressible seal between the door and cabinet frame. The magnetic sealing surface helps hold the closed door against the frame.

How do I confirm this is the correct Traulsen door gasket?

Match OEM number SVC-60005-00 when available, then compare the original gasket profile, snap-in mounting edge, perimeter shape, and equipment data plate information.

Should I inspect the door hardware when replacing a gasket?

Yes. Inspect hinges, latch engagement, the door channel, and frame contact surfaces because alignment or hardware concerns can prevent even gasket compression.

What signs suggest a door gasket should be inspected?

Tears, cracks, flattening, loose sections, visible gaps, uneven contact, moisture near the door opening, or a door that needs extra pressure to close may indicate that the gasket and related door components should be inspected.

Does this listing confirm equipment-model fitment?

No equipment-model fitment is stated. Confirm the application using the equipment model and serial information, OEM part number SVC-60005-00, and a comparison with the original gasket.