Thermo-Kool Heater Elements – Steel Braided Wire OEM Replacement

OEM Part Details

• Manufacturer: Thermo-Kool
• OEM Number: 613300
• OEM Status: VERIFIED
• MPN: 613300
• SKU: PD-720-651
• Part Type: Hinge

Product Overview

OEM Part Details Manufacturer: Thermo-Kool OEM Part Number: 613300 Manufacturer Part Number: 613300 SKU: PD-720-651 Part Type: Hinge Equipment Category: Commercial refrigeration equipment Product Overview The Thermo-Kool 613300 hinge is an OEM-identified door hardware component for commercial refrigeration equipment. A hinge provides the controlled pivot point that allows a door assembly to open, close, and remain properly positioned against the cabinet. That movement is important to daily access, door alignment, latch engagement, and consistent operation of a walk-in cooler or freezer door assembly. When a hinge is worn, damaged, bent, loose, or incorrectly selected, the door may not move smoothly or sit correctly in the opening. Misalignment can place added strain on nearby hardware and may affect how the door closes against its surrounding components. Replacing the correct hinge helps service professionals restore a properly supported door assembly while reducing the risk of ordering hardware that does not match the original component. Use the manufacturer part number 613300 as the primary identification point for this Thermo-Kool hinge. Before ordering, compare the removed part with the product image and review the original mounting arrangement, orientation, and equipment information. These checks are especially important for door hardware because similar-looking hinges can differ in mounting position, pivot layout, and door application.

Product Function

Product Function This Thermo-Kool hinge supports and guides the movement of a commercial refrigeration door assembly. It provides a pivoting connection between the door and its mounting location, allowing the door to swing through its intended range while helping maintain its physical position. Proper hinge condition matters because door movement, alignment, latch operation, and contact with adjacent door hardware all depend on the door being securely supported. The hinge should be selected by the verified Thermo-Kool manufacturer part number 613300 and compared with the original component before purchase. Correct identification helps avoid installing hardware with a different mounting pattern, orientation, or pivot arrangement than the door requires.

Why Choose a Genuine OEM Replacement?

Why Choose a Genuine OEM Replacement? The Thermo-Kool manufacturer part number 613300 provides a reliable reference for identifying this OEM hinge. Matching the original manufacturer part number helps technicians and maintenance teams narrow the order to the intended door hardware component rather than relying on appearance alone. This is valuable when servicing commercial refrigeration doors, where mounting details and hinge orientation can affect alignment. Compare the original component, equipment information, and mounting arrangement before ordering to support a correct part selection.

How This Part Works

How This Part Works A door hinge works as a mechanical pivot between the door assembly and its support point. As the door is opened, the hinge allows controlled rotation around its pivot. As the door closes, the hinge helps return the door to its intended position so adjacent hardware can perform its role. The condition of the hinge, its mounting points, and the hardware around it can influence how the door travels and how it rests when closed. On commercial refrigeration equipment, a door that is not adequately supported can show uneven movement, sagging, rubbing, or difficulty reaching its normal closed position. Those conditions do not identify the hinge as the sole cause, but they make the hinge and surrounding door hardware appropriate areas to inspect. Compare the replacement with the removed component for mounting location, orientation, pivot configuration, and visible design details before installation.

Technician Service Tip

Technician Service Tip Before removing a door hinge, note its position on the door assembly and compare the replacement part with the original component. Inspect the mounting points, adjacent hinge hardware, latch engagement, and door alignment for wear or damage. Door hardware service should be performed with the door properly supported.

Common Failure Symptoms

• A door that sags or sits lower than its normal position may indicate a hinge or mounting-point inspection is needed.
• Uneven door movement during opening or closing can indicate wear, damage, or misalignment around the hinge area.
• A door that rubs against adjacent cabinet or door hardware should be inspected for hinge alignment and support concerns.
• Visible bending, cracking, corrosion, or physical damage on the hinge may indicate replacement is needed.
• Loose mounting hardware or movement at the hinge attachment point can indicate that the hinge area requires attention.
• Difficulty bringing the door into its normal closed position may indicate a hinge, latch, or alignment concern.
• A door that does not remain evenly supported can indicate wear in the hinge or related mounting hardware.
• Unusual resistance, binding, or inconsistent travel at the door pivot may indicate that the hinge assembly should be inspected.

Commercial Applications

Commercial Applications This Thermo-Kool hinge is identified for commercial refrigeration equipment service. Door hardware is commonly evaluated by refrigeration service companies, foodservice maintenance teams, facility operators, and commercial kitchen repair personnel when a walk-in cooler or freezer door requires alignment or hardware attention. The verified manufacturer part number is the key ordering reference for this component. Because equipment configurations can vary, this listing does not establish fitment for a particular cabinet or door assembly. Confirm the Thermo-Kool part number 613300 against the original component and equipment information before purchase. Reviewing the hinge position, mounting arrangement, and door orientation can help reduce wrong-part orders.

Before You Order

• Match Thermo-Kool manufacturer part number 613300 to the original component.
• Compare the replacement hinge with the removed part before ordering.
• Confirm the manufacturer name is Thermo-Kool.
• Review the hinge mounting location on the door assembly.
• Compare the hinge orientation and pivot arrangement with the original component.
• Inspect visible mounting points and hardware placement before selecting a replacement.
• Confirm the equipment information matches the assembly being serviced.
• Review the product image alongside the original component for visible design differences.
• Inspect nearby latch and strike hardware if the door has alignment concerns.
• Ensure the door can be safely supported during service.

Related Components

• Adjacent door hinge hardware should be inspected because wear or looseness at another support point can affect overall door alignment.
• Hinge mounting hardware should be inspected for damage, looseness, or condition concerns that may affect secure attachment.
• Door latch and strike components should be inspected because alignment at the hinge side can influence latch engagement.
• The door gasket should be inspected for uneven contact or wear when the door has been out of alignment.

Frequently Asked Questions

What is Thermo-Kool part number 613300?

Thermo-Kool part number 613300 is identified as a hinge for commercial refrigeration equipment.

How should I identify the correct Thermo-Kool hinge?

Match manufacturer part number 613300 to the original component, then compare the hinge orientation, mounting arrangement, and visible design details before ordering.

Can a worn hinge affect commercial refrigeration door alignment?

A worn, damaged, or loose hinge may contribute to uneven door movement, sagging, rubbing, or difficulty reaching the normal closed position. Related hardware should also be inspected.

What should be checked with a replacement door hinge?

Compare the original and replacement components for mounting location, orientation, pivot configuration, mounting points, and overall shape. Confirm the Thermo-Kool part number before purchase.

Should the latch be inspected when replacing a hinge?

Yes. Latch and strike components are relevant inspection points because door alignment can influence how the latch engages when the door closes.

Does this listing confirm equipment fitment?

No. Confirm the Thermo-Kool part number 613300 against the original component and equipment information before ordering.