Manitowoc 7627813 Ice Thickness Control – Single Probe OEM Replacement

OEM Part Details

• Manufacturer: Manitowoc
• OEM Number: 7627813
• OEM Status: VERIFIED
• MPN: 7627813
• SKU: 7627813
• Part Type: Ice Thickness Control

Product Overview

Manitowoc 7627813 is a single-probe ice thickness control used in commercial equipment service. This genuine OEM component is identified by manufacturer part number 7627813 and is intended to support the equipment’s ice-thickness control process. A properly identified control component matters because ice production depends on the equipment receiving the correct control feedback at the appropriate point in its operating sequence. When an ice thickness control is being inspected or replaced, accurate part identification helps reduce the risk of installing a component with the wrong probe arrangement, connector style, mounting arrangement, or control relationship. This Manitowoc part should be compared carefully with the removed component before ordering, including its visible markings, probe configuration, lead routing, and connection details. Confirming the equipment data plate and serial number also gives the service team a stronger starting point when fitment information is needed. For technicians and foodservice maintenance teams, using the verified Manitowoc part number keeps the order focused on the original component identity rather than a broad description alone. It is a practical choice when the existing single-probe ice thickness control has been diagnosed for inspection and the correct manufacturer part number is required.

Product Function

The Manitowoc 7627813 ice thickness control supports the equipment control process associated with ice thickness. Its single-probe configuration is part of the component’s reliable identity and should be matched to the original part during service. The control works with related equipment-side connections to provide the intended feedback for the control sequence. Because this is a control-related component, a concern affecting ice thickness, control response, probe condition, or the connected lead should be evaluated as part of a broader diagnosis. Replacing a damaged or incorrectly identified control without checking its connection and mounting arrangement can leave the original service concern unresolved. Matching OEM number 7627813 helps keep the replacement selection aligned with the original Manitowoc component identification.

Why Choose a Genuine OEM Replacement?

Manitowoc OEM part number 7627813 provides a reliable identification point when replacing the original ice thickness control. Matching the verified manufacturer part number, single-probe arrangement, and removed component helps reduce wrong-part orders and gives service personnel a clear reference during diagnosis. Use the original component markings and equipment data plate information alongside the OEM number before purchase.

How This Part Works

An ice thickness control has a role in the equipment’s control sequence by supplying the control input associated with ice-thickness operation. The single probe and its connected lead form part of that relationship, so probe condition, routing, connector engagement, and mounting arrangement can all matter during diagnosis. The component should be evaluated with the related control connection rather than treated as an isolated cause of every production concern. When the control is in service, the equipment relies on the intended feedback path between the probe arrangement and the connected controls. Damage to the probe, a worn lead, corrosion at a connector, loose mounting hardware, or a mismatch between the replacement and original configuration can interfere with that path. Manitowoc 7627813 should therefore be compared directly to the removed component, with attention to the OEM number and single-probe identity before installation.

Technician Service Tip

Before replacing the control, compare the removed component with Manitowoc 7627813 for the OEM number, single-probe arrangement, connector details, lead routing, and mounting points. Inspect the connected control input and mounting hardware for visible damage, looseness, or corrosion that could affect the component relationship.

Common Failure Symptoms

• Inconsistent ice-thickness results may indicate that the ice thickness control and its connected components should be inspected.
• Erratic control response can indicate a need to evaluate the probe arrangement, lead condition, and connector engagement.
• Visible damage to the single probe may indicate that replacement or further diagnosis is needed.
• A cracked, pinched, or worn probe lead should be inspected for possible interruption of the control feedback path.
• Corrosion or contamination at the connector may indicate a connection concern requiring evaluation.
• A loose control mounting arrangement can indicate that the component and mounting hardware should be inspected.
• A control-related service concern following recent equipment work may indicate that probe routing and connections should be checked.
• Differences between the installed component markings and the intended replacement may indicate a wrong-part selection risk.
• Repeated control-sequence concerns can indicate that the related controller input and original component configuration should be evaluated.

Commercial Applications

Manitowoc 7627813 is intended for commercial equipment service where a verified single-probe ice thickness control is required. It is relevant to restaurant service operations, foodservice maintenance teams, and commercial kitchen repair personnel working with equipment that uses this identified Manitowoc component. The part should not be selected from a general control description alone. Confirm the manufacturer part number, compare the removed control, and use the equipment data plate and serial number when additional fitment confirmation is needed. This ordering approach helps technicians keep the replacement decision tied to the original component rather than an assumed application.

Before You Order

• Match Manitowoc OEM part number 7627813 to the original component markings.
• Confirm that the required part type is an ice thickness control.
• Compare the single-probe arrangement with the removed component.
• Review the connector style and visible connection details against the original part.
• Compare probe lead routing and lead condition before selecting a replacement.
• Inspect mounting points and mounting hardware for a matching arrangement.
• Confirm the equipment data plate and serial number when fitment information is needed.
• Evaluate the connected control input and related wiring connection during diagnosis.
• Review the product image against the removed component before completing the order.

Related Components

• Probe lead and connector: Inspect for wear, damage, corrosion, or loose engagement that could affect the connection to the ice thickness control.
• Connected controller input: Evaluate the equipment-side control connection when investigating an inconsistent control response.
• Mounting hardware: Check the related mounting points and hardware so the replacement control can be positioned like the original component.
• Original component markings: Compare all visible markings on the removed control with Manitowoc OEM number 7627813 before ordering.

Frequently Asked Questions

What is Manitowoc part number 7627813?

Manitowoc 7627813 is a genuine OEM single-probe ice thickness control. The verified manufacturer part number is 7627813.

What should I compare before ordering this ice thickness control?

Compare the OEM number, part type, single-probe arrangement, connector details, probe lead routing, mounting points, and visible markings on the removed component.

Does this control have a single probe?

Yes. Manitowoc 7627813 is identified as a single-probe ice thickness control. Compare that arrangement with the original component before purchase.

Can a damaged probe lead affect control response?

A damaged, pinched, or worn probe lead may affect the control feedback path. Inspect the lead and connector along with the control during diagnosis.

Will replacing the ice thickness control correct every ice-production concern?

Not necessarily. Ice-thickness concerns can involve the control, probe lead, connector, mounting arrangement, or connected control input. Evaluate related components before replacing parts.

Why is the equipment data plate useful when ordering?

The equipment data plate and serial number provide useful identification details when additional fitment confirmation is needed. They should be reviewed with the OEM number and original component.